Constant using Load Current (2-Phase 4-Wire OS) Calculator

✖Current Overhead AC is defined as the current flowing through the overhead ac supply wire.ⓘ Current Overhead AC [I]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%
✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity [ρ]			+10% -10%
✖Length of Overhead AC Wire is the total length of the wire from one end to other end.ⓘ Length of Overhead AC Wire [L]			+10% -10%
✖Line Losses is defined as the total losses occurring in an Overhead AC line when in use.ⓘ Line Losses [P_loss]			+10% -10%

✖Constant Overhead AC is defined as the constant of line of a Overhead supply system.ⓘ Constant using Load Current (2-Phase 4-Wire OS) [K]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Constant using Load Current (2-Phase 4-Wire OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses
K = 32*(I^2)*(cos(Φ)^2)*ρ*(L^2)/P_loss
This formula uses 1 Functions, 6 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Constant Overhead AC - Constant Overhead AC is defined as the constant of line of a Overhead supply system.
Current Overhead AC - (Measured in Ampere) - Current Overhead AC is defined as the current flowing through the overhead ac supply wire.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Length of Overhead AC Wire - (Measured in Meter) - Length of Overhead AC Wire is the total length of the wire from one end to other end.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead AC line when in use.

STEP 1: Convert Input(s) to Base Unit

Current Overhead AC: 6.9 Ampere --> 6.9 Ampere No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Length of Overhead AC Wire: 10.63 Meter --> 10.63 Meter No Conversion Required
Line Losses: 8.23 Watt --> 8.23 Watt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K = 32*(I^2)*(cos(Φ)^2)*ρ*(L^2)/P_loss --> 32*(6.9^2)*(cos(0.5235987755982)^2)*1.7E-05*(10.63^2)/8.23

Evaluating ... ...

K = 0.266701242147266

STEP 3: Convert Result to Output's Unit

0.266701242147266 --> No Conversion Required

FINAL ANSWER

0.266701242147266 ≈ 0.266701 <-- Constant Overhead AC

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead AC Supply » 2 4 Wire System » Wire Parameters » Constant using Load Current (2-Phase 4-Wire OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Wire Parameters Calculators

Area of X-Section(2-Phase 4-Wire OS)

LaTeX Go Area of Overhead AC Wire = (Power Transmitted^2)*Resistivity*Length of Overhead AC Wire/(((cos(Phase Difference))^2)*Line Losses*(Maximum Voltage Overhead AC^2)*2)

Constant(2-Phase 4-Wire OS)

LaTeX Go Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))

Volume of Conductor Material(2-Phase 4-Wire OS)

LaTeX Go Volume of Conductor = (4)*Area of Overhead AC Wire*Length of Overhead AC Wire

Line Losses(2-Phase 4-Wire OS)

LaTeX Go Line Losses = (4)*((Current Overhead AC)^2)*Resistance Overhead AC

Constant using Load Current (2-Phase 4-Wire OS) Formula

LaTeX Go

Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses
K = 32*(I^2)*(cos(Φ)^2)*ρ*(L^2)/P_loss

What is the value of maximum voltage and volume of conductor material in 2-phase 4-wire system?

The volume of conductor material required in this system is 1/2cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is 2v_m so that r.m.s. value of voltage between them is √2v_m.

How to Calculate Constant using Load Current (2-Phase 4-Wire OS)?

Constant using Load Current (2-Phase 4-Wire OS) calculator uses Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses to calculate the Constant Overhead AC, The Constant using Load Current (2-Phase 4-Wire OS) formula is defined as the total constant of a two-phase four-wire overhead system. it is represented by K. Constant Overhead AC is denoted by K symbol.

How to calculate Constant using Load Current (2-Phase 4-Wire OS) using this online calculator? To use this online calculator for Constant using Load Current (2-Phase 4-Wire OS), enter Current Overhead AC (I), Phase Difference (Φ), Resistivity (ρ), Length of Overhead AC Wire (L) & Line Losses (P_loss) and hit the calculate button. Here is how the Constant using Load Current (2-Phase 4-Wire OS) calculation can be explained with given input values -> 0.266701 = 32*(6.9^2)*(cos(0.5235987755982)^2)*1.7E-05*(10.63^2)/8.23.

FAQ

What is Constant using Load Current (2-Phase 4-Wire OS)?

The Constant using Load Current (2-Phase 4-Wire OS) formula is defined as the total constant of a two-phase four-wire overhead system. it is represented by K and is represented as K = 32*(I^2)*(cos(Φ)^2)*ρ*(L^2)/P_loss or Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses. Current Overhead AC is defined as the current flowing through the overhead ac supply wire, Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit, Resistivity is the measure of how strongly a material opposes the flow of current through them, Length of Overhead AC Wire is the total length of the wire from one end to other end & Line Losses is defined as the total losses occurring in an Overhead AC line when in use.

How to calculate Constant using Load Current (2-Phase 4-Wire OS)?

The Constant using Load Current (2-Phase 4-Wire OS) formula is defined as the total constant of a two-phase four-wire overhead system. it is represented by K is calculated using Constant Overhead AC = 32*(Current Overhead AC^2)*(cos(Phase Difference)^2)*Resistivity*(Length of Overhead AC Wire^2)/Line Losses. To calculate Constant using Load Current (2-Phase 4-Wire OS), you need Current Overhead AC (I), Phase Difference (Φ), Resistivity (ρ), Length of Overhead AC Wire (L) & Line Losses (P_loss). With our tool, you need to enter the respective value for Current Overhead AC, Phase Difference, Resistivity, Length of Overhead AC Wire & Line Losses and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Constant Overhead AC?

In this formula, Constant Overhead AC uses Current Overhead AC, Phase Difference, Resistivity, Length of Overhead AC Wire & Line Losses. We can use 2 other way(s) to calculate the same, which is/are as follows -

Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))
Constant Overhead AC = (4*(Power Transmitted*Length of Overhead AC Wire/Maximum Voltage Overhead AC)^2*Resistivity)/Line Losses

Home

FREE PDFs

🔍 Search