Constant for External Work Done in Adiabatic process Introducing Pressure Solution

STEP 0: Pre-Calculation Summary
Formula Used
Heat Capacity Ratio = ((1/Work Done)*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2))+1
C = ((1/w)*(P1*v1-P2*v2))+1
This formula uses 6 Variables
Variables Used
Heat Capacity Ratio - Heat Capacity Ratio is the ratio of specific heats of a substance at constant pressure and constant volume.
Work Done - (Measured in Joule) - Work Done refers to the amount of energy transferred or expended when a force acts on an object and causes displacement.
Pressure 1 - (Measured in Pascal) - Pressure 1 is the pressure at give point 1.
Specific Volume for Point 1 - (Measured in Cubic Meter per Kilogram) - Specific Volume for Point 1 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.
Pressure 2 - (Measured in Pascal) - Pressure 2 is the pressure at give point 2.
Specific Volume for Point 2 - (Measured in Cubic Meter per Kilogram) - Specific Volume for Point 2 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.
STEP 1: Convert Input(s) to Base Unit
Work Done: 30 Kilojoule --> 30000 Joule (Check conversion ​here)
Pressure 1: 2.5 Bar --> 250000 Pascal (Check conversion ​here)
Specific Volume for Point 1: 1.64 Cubic Meter per Kilogram --> 1.64 Cubic Meter per Kilogram No Conversion Required
Pressure 2: 5.2 Bar --> 520000 Pascal (Check conversion ​here)
Specific Volume for Point 2: 0.816 Cubic Meter per Kilogram --> 0.816 Cubic Meter per Kilogram No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
C = ((1/w)*(P1*v1-P2*v2))+1 --> ((1/30000)*(250000*1.64-520000*0.816))+1
Evaluating ... ...
C = 0.522666666666667
STEP 3: Convert Result to Output's Unit
0.522666666666667 --> No Conversion Required
FINAL ANSWER
0.522666666666667 0.522667 <-- Heat Capacity Ratio
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

Basic Relationship of Thermodynamics Calculators

Mass Density given Absolute Pressure
​ LaTeX ​ Go Mass Density of Gas = Absolute Pressure by Fluid Density/(Ideal Gas Constant*Absolute Temperature of Compressible Fluid)
Gas Constant given Absolute Pressure
​ LaTeX ​ Go Ideal Gas Constant = Absolute Pressure by Fluid Density/(Mass Density of Gas*Absolute Temperature of Compressible Fluid)
Absolute Pressure given Absolute Temperature
​ LaTeX ​ Go Absolute Pressure by Fluid Density = Mass Density of Gas*Ideal Gas Constant*Absolute Temperature of Compressible Fluid
Pressure given Constant
​ LaTeX ​ Go Pressure of Compressible Flow = Gas Constant a/Specific Volume

Constant for External Work Done in Adiabatic process Introducing Pressure Formula

​LaTeX ​Go
Heat Capacity Ratio = ((1/Work Done)*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2))+1
C = ((1/w)*(P1*v1-P2*v2))+1

What is meant by Specific Volume?

Specific volume is a property of materials, defined as the number of cubic meters occupied by one kilogram of a particular substance.

What is Adiabatic Process?

An adiabatic process is a type of thermodynamic process that occurs without transferring heat or mass between the thermodynamic system and its environment. Unlike an isothermal process, an adiabatic process transfers energy to the surroundings only as work.

How to Calculate Constant for External Work Done in Adiabatic process Introducing Pressure?

Constant for External Work Done in Adiabatic process Introducing Pressure calculator uses Heat Capacity Ratio = ((1/Work Done)*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2))+1 to calculate the Heat Capacity Ratio, Constant for External Work Done in Adiabatic process Introducing Pressure is defined as the ratio of specific heat at constant pressure and that at constant volume. Heat Capacity Ratio is denoted by C symbol.

How to calculate Constant for External Work Done in Adiabatic process Introducing Pressure using this online calculator? To use this online calculator for Constant for External Work Done in Adiabatic process Introducing Pressure, enter Work Done (w), Pressure 1 (P1), Specific Volume for Point 1 (v1), Pressure 2 (P2) & Specific Volume for Point 2 (v2) and hit the calculate button. Here is how the Constant for External Work Done in Adiabatic process Introducing Pressure calculation can be explained with given input values -> 0.522667 = ((1/30000)*(250000*1.64-520000*0.816))+1.

FAQ

What is Constant for External Work Done in Adiabatic process Introducing Pressure?
Constant for External Work Done in Adiabatic process Introducing Pressure is defined as the ratio of specific heat at constant pressure and that at constant volume and is represented as C = ((1/w)*(P1*v1-P2*v2))+1 or Heat Capacity Ratio = ((1/Work Done)*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2))+1. Work Done refers to the amount of energy transferred or expended when a force acts on an object and causes displacement, Pressure 1 is the pressure at give point 1, Specific Volume for Point 1 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass, Pressure 2 is the pressure at give point 2 & Specific Volume for Point 2 is the number of cubic meters occupied by one kilogram of matter. It is the ratio of a material's volume to its mass.
How to calculate Constant for External Work Done in Adiabatic process Introducing Pressure?
Constant for External Work Done in Adiabatic process Introducing Pressure is defined as the ratio of specific heat at constant pressure and that at constant volume is calculated using Heat Capacity Ratio = ((1/Work Done)*(Pressure 1*Specific Volume for Point 1-Pressure 2*Specific Volume for Point 2))+1. To calculate Constant for External Work Done in Adiabatic process Introducing Pressure, you need Work Done (w), Pressure 1 (P1), Specific Volume for Point 1 (v1), Pressure 2 (P2) & Specific Volume for Point 2 (v2). With our tool, you need to enter the respective value for Work Done, Pressure 1, Specific Volume for Point 1, Pressure 2 & Specific Volume for Point 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!