LCM calculator

Constant Depending upon Soil at Base of Well given Clay Soil Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Water Resources Ground Water Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Yield of an Open Well Basic Definitions Characteristic Well Losses Confined Aquifers More >>

⤿

Recuperation Test Constant Level Pumping Test

⤿

Constant Depending upon Base Soil Cross Sectional Area of Well Depression Head after Pumping Stopped Depression Head when Pumping Stopped More >>

⤿

Discharge in Well

✖Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area [A_cs]

+10%

-10%

✖Constant depending on the soil at the base of the well.ⓘ Constant Depending upon Soil at Base of Well given Clay Soil [K]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Recuperation Test Formulas PDF PDF Image

Constant Depending upon Soil at Base of Well given Clay Soil Solution

STEP 0: Pre-Calculation Summary

Formula Used

Constant = 0.25*Cross Sectional Area
K = 0.25*A_cs
This formula uses 2 Variables

Variables Used

Constant - Constant depending on the soil at the base of the well.
Cross Sectional Area - (Measured in Square Meter) - Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

STEP 1: Convert Input(s) to Base Unit

Cross Sectional Area: 20 Square Meter --> 20 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K = 0.25*A_cs --> 0.25*20

Evaluating ... ...

K = 5

STEP 3: Convert Result to Output's Unit

5 --> No Conversion Required

FINAL ANSWER

5 <-- Constant

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Recuperation Test » Constant Depending upon Base Soil » Constant Depending upon Soil at Base of Well given Clay Soil

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Constant Depending upon Base Soil Calculators

Constant Depending upon Soil at Base of Well with Base 10

LaTeX Go Constant = ((Cross-Sectional Area given Specific Capacity*2.303)/Time)*log((Depression Head/Depression Head in Well 2),10)

Constant Depending upon Soil at Base of Well

LaTeX Go Constant = (Cross Sectional Area/Time)*log((Depression Head/Depression Head in Well 2),e)

Constant Depending upon Soil at Base of Well given Specific Capacity

LaTeX Go Constant = Cross-Sectional Area given Specific Capacity*Specific Capacity in SI unit

Constant Depending upon Soil at Base of Well given Clay Soil

LaTeX Go Constant = 0.25*Cross Sectional Area

Constant Depending upon Soil at Base of Well given Clay Soil Formula

LaTeX Go

Constant = 0.25*Cross Sectional Area
K = 0.25*A_cs

What is Clay Soil?

Clay is a type of fine-grained natural soil material containing clay minerals. Clays develop plasticity when wet, due to a molecular film of water surrounding the clay particles, but become hard, brittle and non–plastic upon drying or firing.

How to Calculate Constant Depending upon Soil at Base of Well given Clay Soil?

Constant Depending upon Soil at Base of Well given Clay Soil calculator uses Constant = 0.25*Cross Sectional Area to calculate the Constant, The Constant Depending upon Soil at Base of Well given Clay Soil formula is defined as the calculation of the value of constant depending upon soil at base of well when we have prior information of other parameters used. Constant is denoted by K symbol.

How to calculate Constant Depending upon Soil at Base of Well given Clay Soil using this online calculator? To use this online calculator for Constant Depending upon Soil at Base of Well given Clay Soil, enter Cross Sectional Area (A_cs) and hit the calculate button. Here is how the Constant Depending upon Soil at Base of Well given Clay Soil calculation can be explained with given input values -> 5 = 0.25*20.

FAQ

What is Constant Depending upon Soil at Base of Well given Clay Soil?

The Constant Depending upon Soil at Base of Well given Clay Soil formula is defined as the calculation of the value of constant depending upon soil at base of well when we have prior information of other parameters used and is represented as K = 0.25*A_cs or Constant = 0.25*Cross Sectional Area. Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

How to calculate Constant Depending upon Soil at Base of Well given Clay Soil?

The Constant Depending upon Soil at Base of Well given Clay Soil formula is defined as the calculation of the value of constant depending upon soil at base of well when we have prior information of other parameters used is calculated using Constant = 0.25*Cross Sectional Area. To calculate Constant Depending upon Soil at Base of Well given Clay Soil, you need Cross Sectional Area (A_cs). With our tool, you need to enter the respective value for Cross Sectional Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Constant?

In this formula, Constant uses Cross Sectional Area. We can use 3 other way(s) to calculate the same, which is/are as follows -

Constant = Cross-Sectional Area given Specific Capacity*Specific Capacity in SI unit
Constant = (Cross Sectional Area/Time)*log((Depression Head/Depression Head in Well 2),e)
Constant = ((Cross-Sectional Area given Specific Capacity*2.303)/Time)*log((Depression Head/Depression Head in Well 2),10)

Home

FREE PDFs

🔍 Search