Constant Depression Head given Specific Capacity for Coarse Sand Calculator

✖Discharge in Well is the rate of flow of a liquid in well.ⓘ Discharge in Well [Q]			+10% -10%
✖Cross-Sectional Area of Well is the the surface area of the interior opening of the well.ⓘ Cross-Sectional Area of Well [A_csw]			+10% -10%

✖Constant Depression Head for Coarse Sand is the difference of level of waters table and the water level in the well now is called a head of depression.ⓘ Constant Depression Head given Specific Capacity for Coarse Sand [H_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Level Pumping Test Formulas PDF PDF Image

Constant Depression Head given Specific Capacity for Coarse Sand Solution

STEP 0: Pre-Calculation Summary

Formula Used

Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1)
H_c = Q/(A_csw*1)
This formula uses 3 Variables

Variables Used

Constant Depression Head for Coarse Sand - Constant Depression Head for Coarse Sand is the difference of level of waters table and the water level in the well now is called a head of depression.
Discharge in Well - (Measured in Cubic Meter per Second) - Discharge in Well is the rate of flow of a liquid in well.
Cross-Sectional Area of Well - (Measured in Square Meter) - Cross-Sectional Area of Well is the the surface area of the interior opening of the well.

STEP 1: Convert Input(s) to Base Unit

Discharge in Well: 0.99 Cubic Meter per Second --> 0.99 Cubic Meter per Second No Conversion Required
Cross-Sectional Area of Well: 13 Square Meter --> 13 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_c = Q/(A_csw*1) --> 0.99/(13*1)

Evaluating ... ...

H_c = 0.0761538461538462

STEP 3: Convert Result to Output's Unit

0.0761538461538462 --> No Conversion Required

FINAL ANSWER

0.0761538461538462 ≈ 0.076154 <-- Constant Depression Head for Coarse Sand

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Constant Level Pumping Test » Depression Head » Constant Depression Head given Specific Capacity for Coarse Sand

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Depression Head Calculators

Constant Depression Head given Specific Capacity

LaTeX Go Constant Depression Head = Discharge in Well/(Cross-Sectional Area of Well*Specific Capacity in SI unit)

Constant Depression Head given Specific Capacity for Clay Soil

LaTeX Go Constant Depression Head for Clay Soil = Discharge in Well/(Cross-Sectional Area of Well*0.25)

Constant Depression Head given Specific Capacity for Coarse Sand

LaTeX Go Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1)

Constant Depression Head given Specific Capacity for Fine Sand

LaTeX Go Constant Depression Head for Fine Soil = Discharge in Well/(Cross-Sectional Area of Well*0.5)

Constant Depression Head given Specific Capacity for Coarse Sand Formula

LaTeX Go

Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1)
H_c = Q/(A_csw*1)

What is Coarse Sand?

Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete.

How to Calculate Constant Depression Head given Specific Capacity for Coarse Sand?

Constant Depression Head given Specific Capacity for Coarse Sand calculator uses Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1) to calculate the Constant Depression Head for Coarse Sand, The Constant Depression Head given Specific Capacity for Coarse Sand formula is defined a the calculation of value of constant depression head when we have prior information of specific capacity of coarse sand. Constant Depression Head for Coarse Sand is denoted by H_c symbol.

How to calculate Constant Depression Head given Specific Capacity for Coarse Sand using this online calculator? To use this online calculator for Constant Depression Head given Specific Capacity for Coarse Sand, enter Discharge in Well (Q) & Cross-Sectional Area of Well (A_csw) and hit the calculate button. Here is how the Constant Depression Head given Specific Capacity for Coarse Sand calculation can be explained with given input values -> 0.077692 = 0.99/(13*1).

FAQ

What is Constant Depression Head given Specific Capacity for Coarse Sand?

The Constant Depression Head given Specific Capacity for Coarse Sand formula is defined a the calculation of value of constant depression head when we have prior information of specific capacity of coarse sand and is represented as H_c = Q/(A_csw*1) or Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1). Discharge in Well is the rate of flow of a liquid in well & Cross-Sectional Area of Well is the the surface area of the interior opening of the well.

How to calculate Constant Depression Head given Specific Capacity for Coarse Sand?

The Constant Depression Head given Specific Capacity for Coarse Sand formula is defined a the calculation of value of constant depression head when we have prior information of specific capacity of coarse sand is calculated using Constant Depression Head for Coarse Sand = Discharge in Well/(Cross-Sectional Area of Well*1). To calculate Constant Depression Head given Specific Capacity for Coarse Sand, you need Discharge in Well (Q) & Cross-Sectional Area of Well (A_csw). With our tool, you need to enter the respective value for Discharge in Well & Cross-Sectional Area of Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search