Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio Calculator

✖Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.ⓘ Compressive Stress [σ_c]			+10% -10%
✖Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.ⓘ Crippling Load [P]			+10% -10%
✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]			+10% -10%
✖Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.ⓘ Slenderness Ratio [λ]			+10% -10%

✖Straight Line Formula Constant is defined as the constant that depends on the material of column.ⓘ Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio [n]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio)
n = (σ_c-(P/A_sectional))/(λ)
This formula uses 5 Variables

Variables Used

Straight Line Formula Constant - Straight Line Formula Constant is defined as the constant that depends on the material of column.
Compressive Stress - (Measured in Pascal) - Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.
Crippling Load - (Measured in Newton) - Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
Slenderness Ratio - Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.

STEP 1: Convert Input(s) to Base Unit

Compressive Stress: 0.002827 Megapascal --> 2827 Pascal (Check conversion here)
Crippling Load: 3.6 Kilonewton --> 3600 Newton (Check conversion here)
Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required
Slenderness Ratio: 0.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

n = (σ_c-(P/A_sectional))/(λ) --> (2827-(3600/1.4))/(0.5)

Evaluating ... ...

n = 511.142857142857

STEP 3: Convert Result to Output's Unit

511.142857142857 --> No Conversion Required

FINAL ANSWER

511.142857142857 ≈ 511.1429 <-- Straight Line Formula Constant

(Calculation completed in 00.014 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Straight Line Formula » Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Straight Line Formula Calculators

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Cross-Sectional Area of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Compressive Yield Stress by Straight-Line Formula for Columns and Struts

LaTeX Go Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))

Crippling Load on Column by Straight-Line Formula

LaTeX Go Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area

Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio Formula

LaTeX Go

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio)
n = (σ_c-(P/A_sectional))/(λ)

What is Slenderness Ratio in Column?

The slenderness ratio of a reinforced concrete (RC) column is the ratio between the length of the column, its lateral dimensions, and end fixity. The slenderness ratio is calculated by dividing the column length by its radius of gyration. The slenderness ratio differentiates the short column from the long or slender column.

How to Calculate Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio?

Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio calculator uses Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio) to calculate the Straight Line Formula Constant, Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio formula is defined as a value that depends on the material properties of a column and is used to determine the critical buckling load of a column under compression, taking into account the slenderness ratio of the column. Straight Line Formula Constant is denoted by n symbol.

How to calculate Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio using this online calculator? To use this online calculator for Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio, enter Compressive Stress (σ_c), Crippling Load (P), Column Cross Sectional Area (A_sectional) & Slenderness Ratio (λ) and hit the calculate button. Here is how the Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio calculation can be explained with given input values -> 6.4E+6 = (2827-(3600/1.4))/(0.5).

FAQ

What is Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio?

Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio formula is defined as a value that depends on the material properties of a column and is used to determine the critical buckling load of a column under compression, taking into account the slenderness ratio of the column and is represented as n = (σ_c-(P/A_sectional))/(λ) or Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio). Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material, Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability, Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point & Slenderness Ratio is the ratio of the length of a column and the least radius of gyration of its cross section.

How to calculate Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio?

Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio formula is defined as a value that depends on the material properties of a column and is used to determine the critical buckling load of a column under compression, taking into account the slenderness ratio of the column is calculated using Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio). To calculate Constant Depending on Material of Column by Straight Line Formula given Slenderness Ratio, you need Compressive Stress (σ_c), Crippling Load (P), Column Cross Sectional Area (A_sectional) & Slenderness Ratio (λ). With our tool, you need to enter the respective value for Compressive Stress, Crippling Load, Column Cross Sectional Area & Slenderness Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Straight Line Formula Constant?

In this formula, Straight Line Formula Constant uses Compressive Stress, Crippling Load, Column Cross Sectional Area & Slenderness Ratio. We can use 1 other way(s) to calculate the same, which is/are as follows -

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Home

FREE PDFs

🔍 Search