Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts Calculator

✖Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.ⓘ Compressive Stress [σ_c]			+10% -10%
✖Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.ⓘ Crippling Load [P]			+10% -10%
✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]			+10% -10%
✖Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.ⓘ Effective Column Length [L_eff]			+10% -10%
✖Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.ⓘ Least Radius of Gyration [r_least]			+10% -10%

✖Straight Line Formula Constant is defined as the constant that depends on the material of column.ⓘ Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts [n]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts Solution

STEP 0: Pre-Calculation Summary

Formula Used

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))
n = (σ_c-(P/A_sectional))/((L_eff/r_least))
This formula uses 6 Variables

Variables Used

Straight Line Formula Constant - Straight Line Formula Constant is defined as the constant that depends on the material of column.
Compressive Stress - (Measured in Pascal) - Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.
Crippling Load - (Measured in Newton) - Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
Effective Column Length - (Measured in Meter) - Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.
Least Radius of Gyration - (Measured in Meter) - Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.

STEP 1: Convert Input(s) to Base Unit

Compressive Stress: 0.002827 Megapascal --> 2827 Pascal (Check conversion here)
Crippling Load: 3.6 Kilonewton --> 3600 Newton (Check conversion here)
Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required
Effective Column Length: 3000 Millimeter --> 3 Meter (Check conversion here)
Least Radius of Gyration: 47.02 Millimeter --> 0.04702 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

n = (σ_c-(P/A_sectional))/((L_eff/r_least)) --> (2827-(3600/1.4))/((3/0.04702))

Evaluating ... ...

n = 4.00565619047619

STEP 3: Convert Result to Output's Unit

4.00565619047619 --> No Conversion Required

FINAL ANSWER

4.00565619047619 ≈ 4.005656 <-- Straight Line Formula Constant

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Straight Line Formula » Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Straight Line Formula Calculators

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Cross-Sectional Area of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Compressive Yield Stress by Straight-Line Formula for Columns and Struts

LaTeX Go Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))

Crippling Load on Column by Straight-Line Formula

LaTeX Go Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts Formula

LaTeX Go

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))
n = (σ_c-(P/A_sectional))/((L_eff/r_least))

What is Slenderness Ratio in Column?

The slenderness ratio of a reinforced concrete (RC) column is the ratio between the length of the column, its lateral dimensions, and end fixity. The slenderness ratio is calculated by dividing the column length by its radius of gyration. The slenderness ratio differentiates short column from the long or slender column.

How to Calculate Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts?

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts calculator uses Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration)) to calculate the Straight Line Formula Constant, Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts formula is defined as a measure of the constant that depends on the material of the column, which is essential in determining the load-carrying capacity of columns and struts in structural engineering, taking into account the effective length, least radius, and sectional area of the column. Straight Line Formula Constant is denoted by n symbol.

How to calculate Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts using this online calculator? To use this online calculator for Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts, enter Compressive Stress (σ_c), Crippling Load (P), Column Cross Sectional Area (A_sectional), Effective Column Length (L_eff) & Least Radius of Gyration (r_least) and hit the calculate button. Here is how the Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts calculation can be explained with given input values -> 50114.36 = (2827-(3600/1.4))/((3/0.04702)).

FAQ

What is Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts?

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts formula is defined as a measure of the constant that depends on the material of the column, which is essential in determining the load-carrying capacity of columns and struts in structural engineering, taking into account the effective length, least radius, and sectional area of the column and is represented as n = (σ_c-(P/A_sectional))/((L_eff/r_least)) or Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration)). Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material, Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability, Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point, Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration & Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.

How to calculate Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts?

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts formula is defined as a measure of the constant that depends on the material of the column, which is essential in determining the load-carrying capacity of columns and struts in structural engineering, taking into account the effective length, least radius, and sectional area of the column is calculated using Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration)). To calculate Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts, you need Compressive Stress (σ_c), Crippling Load (P), Column Cross Sectional Area (A_sectional), Effective Column Length (L_eff) & Least Radius of Gyration (r_least). With our tool, you need to enter the respective value for Compressive Stress, Crippling Load, Column Cross Sectional Area, Effective Column Length & Least Radius of Gyration and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Straight Line Formula Constant?

In this formula, Straight Line Formula Constant uses Compressive Stress, Crippling Load, Column Cross Sectional Area, Effective Column Length & Least Radius of Gyration. We can use 1 other way(s) to calculate the same, which is/are as follows -

Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/(Slenderness Ratio)

Home

FREE PDFs

🔍 Search