Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux Calculator

✖Instantaneous Mass Flux is the rate of mass flow.ⓘ Instantaneous Mass Flux [Q_m]			+10% -10%
✖Instantaneous Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area.ⓘ Instantaneous Discharge [Q_instant]			+10% -10%

✖Concentration of Variable of Interest for a river, if only one sample has been taken at a point.ⓘ Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux [c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Streamflow Measurement Formulas PDF PDF Image

Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux Solution

STEP 0: Pre-Calculation Summary

Formula Used

Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge
c = Q_m/Q_instant
This formula uses 3 Variables

Variables Used

Concentration of Variable of Interest - Concentration of Variable of Interest for a river, if only one sample has been taken at a point.
Instantaneous Mass Flux - (Measured in Cubic Meter per Second) - Instantaneous Mass Flux is the rate of mass flow.
Instantaneous Discharge - (Measured in Cubic Meter per Second) - Instantaneous Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area.

STEP 1: Convert Input(s) to Base Unit

Instantaneous Mass Flux: 120 Cubic Meter per Second --> 120 Cubic Meter per Second No Conversion Required
Instantaneous Discharge: 30 Cubic Meter per Second --> 30 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

c = Q_m/Q_instant --> 120/30

Evaluating ... ...

c = 4

STEP 3: Convert Result to Output's Unit

4 --> No Conversion Required

FINAL ANSWER

4 <-- Concentration of Variable of Interest

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Streamflow Measurement » Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux

Credits

Created by Rachana B V

The National Institute of Engineering (NIE), Mysuru

Rachana B V has created this Calculator and 25+ more calculators!

Verified by Ayush Singh

Gautam Buddha University (GBU), Greater Noida

Ayush Singh has verified this Calculator and 100+ more calculators!

< Streamflow Measurement Calculators

Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux

LaTeX Go Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge

Instantaneous Discharge given Instantaneous Mass Flux

LaTeX Go Instantaneous Discharge = Instantaneous Mass Flux/Concentration of Variable of Interest

Mass Flux Computation

LaTeX Go Instantaneous Mass Flux = Concentration of Variable of Interest*Instantaneous Discharge

Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux Formula

LaTeX Go

Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge
c = Q_m/Q_instant

What is Mass flux Computation?

Water quality monitoring often seeks to obtain two main types of estimations related to the
physical and chemical variables being measured:
• the instantaneous values of the concentrations of water quality variables, and
• the mass flux of water quality variables through river sections, lakes or reservoirs over
specified periods.

How to Calculate Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux?

Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux calculator uses Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge to calculate the Concentration of Variable of Interest, The Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux formula is defined as the instantaneous discharge and mass flux, representing dynamic environmental conditions. Concentration of Variable of Interest is denoted by c symbol.

How to calculate Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux using this online calculator? To use this online calculator for Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux, enter Instantaneous Mass Flux (Q_m) & Instantaneous Discharge (Q_instant) and hit the calculate button. Here is how the Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux calculation can be explained with given input values -> 4 = 120/30.

FAQ

What is Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux?

The Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux formula is defined as the instantaneous discharge and mass flux, representing dynamic environmental conditions and is represented as c = Q_m/Q_instant or Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge. Instantaneous Mass Flux is the rate of mass flow & Instantaneous Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area.

How to calculate Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux?

The Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux formula is defined as the instantaneous discharge and mass flux, representing dynamic environmental conditions is calculated using Concentration of Variable of Interest = Instantaneous Mass Flux/Instantaneous Discharge. To calculate Concentration of Variable of Interest given Instantaneous Discharge and Mass Flux, you need Instantaneous Mass Flux (Q_m) & Instantaneous Discharge (Q_instant). With our tool, you need to enter the respective value for Instantaneous Mass Flux & Instantaneous Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search