Compressive Yield Stress by Straight-Line Formula for Columns and Struts Calculator

✖Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.ⓘ Crippling Load [P]			+10% -10%
✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]			+10% -10%
✖Straight Line Formula Constant is defined as the constant that depends on the material of column.ⓘ Straight Line Formula Constant [n]			+10% -10%
✖Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.ⓘ Effective Column Length [L_eff]			+10% -10%
✖Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.ⓘ Least Radius of Gyration [r_least]			+10% -10%

✖Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.ⓘ Compressive Yield Stress by Straight-Line Formula for Columns and Struts [σ_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Compressive Yield Stress by Straight-Line Formula for Columns and Struts Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))
σ_c = (P/A_sectional)+(n*(L_eff/r_least))
This formula uses 6 Variables

Variables Used

Compressive Stress - (Measured in Pascal) - Compressive Stress is the internal resistance a material generates per unit area when subjected to a compressive force, which acts to reduce the volume or shorten the material.
Crippling Load - (Measured in Newton) - Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.
Straight Line Formula Constant - Straight Line Formula Constant is defined as the constant that depends on the material of column.
Effective Column Length - (Measured in Meter) - Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration.
Least Radius of Gyration - (Measured in Meter) - Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.

STEP 1: Convert Input(s) to Base Unit

Crippling Load: 3.6 Kilonewton --> 3600 Newton (Check conversion here)
Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required
Straight Line Formula Constant: 4 --> No Conversion Required
Effective Column Length: 3000 Millimeter --> 3 Meter (Check conversion here)
Least Radius of Gyration: 47.02 Millimeter --> 0.04702 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_c = (P/A_sectional)+(n*(L_eff/r_least)) --> (3600/1.4)+(4*(3/0.04702))

Evaluating ... ...

σ_c = 2826.63912013125

STEP 3: Convert Result to Output's Unit

2826.63912013125 Pascal -->0.00282663912013125 Megapascal (Check conversion here)

FINAL ANSWER

0.00282663912013125 ≈ 0.002827 Megapascal <-- Compressive Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Straight Line Formula » Compressive Yield Stress by Straight-Line Formula for Columns and Struts

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Straight Line Formula Calculators

Constant Depending on Material of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Straight Line Formula Constant = (Compressive Stress-(Crippling Load/Column Cross Sectional Area))/((Effective Column Length/Least Radius of Gyration))

Cross-Sectional Area of Column by Straight-Line Formula for Columns and Struts

LaTeX Go Column Cross Sectional Area = Crippling Load/(Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))

Compressive Yield Stress by Straight-Line Formula for Columns and Struts

LaTeX Go Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))

Crippling Load on Column by Straight-Line Formula

LaTeX Go Crippling Load = (Compressive Stress-(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)))*Column Cross Sectional Area

Compressive Yield Stress by Straight-Line Formula for Columns and Struts Formula

LaTeX Go

Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration))
σ_c = (P/A_sectional)+(n*(L_eff/r_least))

What is Slenderness Ratio in Column?

The slenderness ratio of a reinforced concrete (RC) column is the ratio between the length of the column, its lateral dimensions, and end fixity. The slenderness ratio is calculated by dividing the column length by its radius of gyration. The slenderness ratio differentiates the short column from the long or slender column.

How to Calculate Compressive Yield Stress by Straight-Line Formula for Columns and Struts?

Compressive Yield Stress by Straight-Line Formula for Columns and Struts calculator uses Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)) to calculate the Compressive Stress, Compressive Yield Stress by Straight-Line Formula for Columns and Struts formula is defined as a measure of the maximum stress a column or strut can withstand without deforming plastically, providing a critical value for structural design and analysis in construction and engineering applications. Compressive Stress is denoted by σ_c symbol.

How to calculate Compressive Yield Stress by Straight-Line Formula for Columns and Struts using this online calculator? To use this online calculator for Compressive Yield Stress by Straight-Line Formula for Columns and Struts, enter Crippling Load (P), Column Cross Sectional Area (A_sectional), Straight Line Formula Constant (n), Effective Column Length (L_eff) & Least Radius of Gyration (r_least) and hit the calculate button. Here is how the Compressive Yield Stress by Straight-Line Formula for Columns and Struts calculation can be explained with given input values -> 2.8E-9 = (3600/1.4)+(4*(3/0.04702)).

FAQ

What is Compressive Yield Stress by Straight-Line Formula for Columns and Struts?

Compressive Yield Stress by Straight-Line Formula for Columns and Struts formula is defined as a measure of the maximum stress a column or strut can withstand without deforming plastically, providing a critical value for structural design and analysis in construction and engineering applications and is represented as σ_c = (P/A_sectional)+(n*(L_eff/r_least)) or Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)). Crippling Load is the maximum load a structural member, such as a column or slender element, can carry before it experiences buckling or instability, Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point, Straight Line Formula Constant is defined as the constant that depends on the material of column, Effective Column Length can be defined as the length of an equivalent pin-ended column having the same load-carrying capacity as the member under consideration & Least Radius of Gyration is the smallest value of the radius of gyration is used for structural calculations.

How to calculate Compressive Yield Stress by Straight-Line Formula for Columns and Struts?

Compressive Yield Stress by Straight-Line Formula for Columns and Struts formula is defined as a measure of the maximum stress a column or strut can withstand without deforming plastically, providing a critical value for structural design and analysis in construction and engineering applications is calculated using Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Effective Column Length/Least Radius of Gyration)). To calculate Compressive Yield Stress by Straight-Line Formula for Columns and Struts, you need Crippling Load (P), Column Cross Sectional Area (A_sectional), Straight Line Formula Constant (n), Effective Column Length (L_eff) & Least Radius of Gyration (r_least). With our tool, you need to enter the respective value for Crippling Load, Column Cross Sectional Area, Straight Line Formula Constant, Effective Column Length & Least Radius of Gyration and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Compressive Stress?

In this formula, Compressive Stress uses Crippling Load, Column Cross Sectional Area, Straight Line Formula Constant, Effective Column Length & Least Radius of Gyration. We can use 1 other way(s) to calculate the same, which is/are as follows -

Compressive Stress = (Crippling Load/Column Cross Sectional Area)+(Straight Line Formula Constant*(Slenderness Ratio))

Home

FREE PDFs

🔍 Search