Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient Calculator

✖Pitzer Correlations Coefficient B(0) is calculated from Abott equation. It's a function of reduced temperature.ⓘ Pitzer Correlations Coefficient B(0) [B⁰]			+10% -10%
✖Reduced Pressure is the ratio of the actual pressure of the fluid to its critical pressure. It is dimensionless.ⓘ Reduced Pressure [P_r]			+10% -10%
✖Reduced Temperature is the ratio of the actual temperature of the fluid to its critical temperature. It is dimensionless.ⓘ Reduced Temperature [T_r]			+10% -10%
✖Acentric Factor is a standard for the phase characterization of single & pure components.ⓘ Acentric Factor [ω]			+10% -10%
✖Pitzer Correlations Coefficient B(1) is calculated from Abott equation. It's a function of reduced temperature.ⓘ Pitzer Correlations Coefficient B(1) [B¹]			+10% -10%

✖Compressibility factor is the factor of correction that describes the deviation of the real gas from the ideal gas.ⓘ Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient [z]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressibility Factor = 1+((Pitzer Correlations Coefficient B(0)*Reduced Pressure)/Reduced Temperature)+((Acentric Factor*Pitzer Correlations Coefficient B(1)*Reduced Pressure)/Reduced Temperature)
z = 1+((B⁰*P_r)/T_r)+((ω*B¹*P_r)/T_r)
This formula uses 6 Variables

Variables Used

Compressibility Factor - Compressibility factor is the factor of correction that describes the deviation of the real gas from the ideal gas.
Pitzer Correlations Coefficient B(0) - Pitzer Correlations Coefficient B(0) is calculated from Abott equation. It's a function of reduced temperature.
Reduced Pressure - Reduced Pressure is the ratio of the actual pressure of the fluid to its critical pressure. It is dimensionless.
Reduced Temperature - Reduced Temperature is the ratio of the actual temperature of the fluid to its critical temperature. It is dimensionless.
Acentric Factor - Acentric Factor is a standard for the phase characterization of single & pure components.
Pitzer Correlations Coefficient B(1) - Pitzer Correlations Coefficient B(1) is calculated from Abott equation. It's a function of reduced temperature.

STEP 1: Convert Input(s) to Base Unit

Pitzer Correlations Coefficient B(0): 0.2 --> No Conversion Required
Reduced Pressure: 3.675E-05 --> No Conversion Required
Reduced Temperature: 10 --> No Conversion Required
Acentric Factor: 0.5 --> No Conversion Required
Pitzer Correlations Coefficient B(1): 0.25 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

z = 1+((B⁰*P_r)/T_r)+((ω*B¹*P_r)/T_r) --> 1+((0.2*3.675E-05)/10)+((0.5*0.25*3.675E-05)/10)

Evaluating ... ...

z = 1.000001194375

STEP 3: Convert Result to Output's Unit

1.000001194375 --> No Conversion Required

FINAL ANSWER

1.000001194375 ≈ 1.000001 <-- Compressibility Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Volumetric Properties of Pure Fluids » Equation of States » Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has verified this Calculator and 300+ more calculators!

< Equation of States Calculators

Acentric Factor using Pitzer Correlations for Compressibility Factor

LaTeX Go Acentric Factor = (Compressibility Factor-Pitzer Correlations Coefficient Z(0))/Pitzer Correlations Coefficient Z(1)

Compressibility Factor using Pitzer Correlations for Compressibility Factor

LaTeX Go Compressibility Factor = Pitzer Correlations Coefficient Z(0)+Acentric Factor*Pitzer Correlations Coefficient Z(1)

Reduced Temperature

LaTeX Go Reduced Temperature = Temperature/Critical Temperature

Reduced Pressure

LaTeX Go Reduced Pressure = Pressure/Critical Pressure

Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient Formula

LaTeX Go

Why we use virial equation of state?

The perfect gas law is an imperfect description of a real gas, we can combine the perfect gas law and the compressibility factors of real gases to develop an equation to describe the isotherms of a real gas. This Equation is known as the Virial Equation of state, which expresses the deviation from ideality in terms of a power series in the density.
The actual behavior of fluids is often described with the virial equation:
PV = RT[1 + (B/V) + (C/(V^2)) + ...] ,
where,
B is the second virial coefficient,
C is called the third virial coefficient, etc.

in which the temperature-dependent constants for each gas are known as the virial coefficients. The second virial coefficient, B, has units of volume (L).

Why we modify the second virial coefficient to reduced second virial coefficient?

The tabular nature of the generalized compressibility-factor correlation is a disadvantage, but the complexity of the functions Z(0) and Z(1) precludes their accurate representation by simple equations. Nonetheless, we can give approximate analytical expression to these functions for a limited range of pressures. So we modify the second virial coefficient to reduced the second virial coefficient.

How to Calculate Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient?

Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient calculator uses Compressibility Factor = 1+((Pitzer Correlations Coefficient B(0)*Reduced Pressure)/Reduced Temperature)+((Acentric Factor*Pitzer Correlations Coefficient B(1)*Reduced Pressure)/Reduced Temperature) to calculate the Compressibility Factor, The Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient formula is defined as the function of the B(0), B(1), acentric factor, reduced pressure and the reduced temperature. Compressibility Factor is denoted by z symbol.

How to calculate Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient using this online calculator? To use this online calculator for Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient, enter Pitzer Correlations Coefficient B(0) (B⁰), Reduced Pressure (P_r), Reduced Temperature (T_r), Acentric Factor (ω) & Pitzer Correlations Coefficient B(1) (B¹) and hit the calculate button. Here is how the Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient calculation can be explained with given input values -> 1.000001 = 1+((0.2*3.675E-05)/10)+((0.5*0.25*3.675E-05)/10).

FAQ

What is Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient?

The Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient formula is defined as the function of the B(0), B(1), acentric factor, reduced pressure and the reduced temperature and is represented as z = 1+((B⁰*P_r)/T_r)+((ω*B¹*P_r)/T_r) or Compressibility Factor = 1+((Pitzer Correlations Coefficient B(0)*Reduced Pressure)/Reduced Temperature)+((Acentric Factor*Pitzer Correlations Coefficient B(1)*Reduced Pressure)/Reduced Temperature). Pitzer Correlations Coefficient B(0) is calculated from Abott equation. It's a function of reduced temperature, Reduced Pressure is the ratio of the actual pressure of the fluid to its critical pressure. It is dimensionless, Reduced Temperature is the ratio of the actual temperature of the fluid to its critical temperature. It is dimensionless, Acentric Factor is a standard for the phase characterization of single & pure components & Pitzer Correlations Coefficient B(1) is calculated from Abott equation. It's a function of reduced temperature.

How to calculate Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient?

The Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient formula is defined as the function of the B(0), B(1), acentric factor, reduced pressure and the reduced temperature is calculated using Compressibility Factor = 1+((Pitzer Correlations Coefficient B(0)*Reduced Pressure)/Reduced Temperature)+((Acentric Factor*Pitzer Correlations Coefficient B(1)*Reduced Pressure)/Reduced Temperature). To calculate Compressibility Factor using B(0) and B(1) of Pitzer Correlations for Second Virial Coefficient, you need Pitzer Correlations Coefficient B(0) (B⁰), Reduced Pressure (P_r), Reduced Temperature (T_r), Acentric Factor (ω) & Pitzer Correlations Coefficient B(1) (B¹). With our tool, you need to enter the respective value for Pitzer Correlations Coefficient B(0), Reduced Pressure, Reduced Temperature, Acentric Factor & Pitzer Correlations Coefficient B(1) and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Compressibility Factor?

In this formula, Compressibility Factor uses Pitzer Correlations Coefficient B(0), Reduced Pressure, Reduced Temperature, Acentric Factor & Pitzer Correlations Coefficient B(1). We can use 3 other way(s) to calculate the same, which is/are as follows -

Compressibility Factor = Pitzer Correlations Coefficient Z(0)+Acentric Factor*Pitzer Correlations Coefficient Z(1)
Compressibility Factor = 1+((Second Virial Coefficient*Pressure)/([R]*Temperature))
Compressibility Factor = 1+((Reduced Second Virial Coefficient*Reduced Pressure)/Reduced Temperature)

Home

FREE PDFs

🔍 Search