Compressor Efficiency using Actual and Isentropic Change in Enthalpy Calculator

✖Change in Enthalpy (Isentropic) is the thermodynamic quantity equivalent to the total difference between the heat content of a system under reversible and adiabatic conditions.ⓘ Change in Enthalpy (Isentropic) [ΔH_S]			+10% -10%
✖Change in enthalpy is the thermodynamic quantity equivalent to the total difference between the heat content of a system.ⓘ Change in Enthalpy [ΔH]			+10% -10%

✖Compressor Efficiency shows how efficient the compressor is in the process.ⓘ Compressor Efficiency using Actual and Isentropic Change in Enthalpy [η_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Compressor Efficiency using Actual and Isentropic Change in Enthalpy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy
η_c = ΔH_S/ΔH
This formula uses 3 Variables

Variables Used

Compressor Efficiency - Compressor Efficiency shows how efficient the compressor is in the process.
Change in Enthalpy (Isentropic) - (Measured in Joule per Kilogram) - Change in Enthalpy (Isentropic) is the thermodynamic quantity equivalent to the total difference between the heat content of a system under reversible and adiabatic conditions.
Change in Enthalpy - (Measured in Joule per Kilogram) - Change in enthalpy is the thermodynamic quantity equivalent to the total difference between the heat content of a system.

STEP 1: Convert Input(s) to Base Unit

Change in Enthalpy (Isentropic): 310 Joule per Kilogram --> 310 Joule per Kilogram No Conversion Required
Change in Enthalpy: 190 Joule per Kilogram --> 190 Joule per Kilogram No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

η_c = ΔH_S/ΔH --> 310/190

Evaluating ... ...

η_c = 1.63157894736842

STEP 3: Convert Result to Output's Unit

1.63157894736842 --> No Conversion Required

FINAL ANSWER

1.63157894736842 ≈ 1.631579 <-- Compressor Efficiency

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Application of Thermodynamics to Flow Processes » Compressor Efficiency using Actual and Isentropic Change in Enthalpy

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has verified this Calculator and 300+ more calculators!

< Application of Thermodynamics to Flow Processes Calculators

Isentropic Work Done Rate for Adiabatic Compression Process using Gamma

LaTeX Go Shaft Work (Isentropic) = [R]*(Temperature of Surface 1/((Heat Capacity Ratio-1)/Heat Capacity Ratio))*((Pressure 2/Pressure 1)^((Heat Capacity Ratio-1)/Heat Capacity Ratio)-1)

Isentropic Work done rate for Adiabatic Compression Process using Cp

LaTeX Go Shaft Work (Isentropic) = Specific Heat Capacity*Temperature of Surface 1*((Pressure 2/Pressure 1)^([R]/Specific Heat Capacity)-1)

Overall Efficiency given Boiler, Cycle, Turbine, Generator, and Auxiliary Efficiency

LaTeX Go Overall Efficiency = Boiler Efficiency*Cycle Efficiency*Turbine Efficiency*Generator Efficiency*Auxiliary Efficiency

Nozzle Efficiency

LaTeX Go Nozzle Efficiency = Change in Kinetic Energy/Kinetic Energy

Compressor Efficiency using Actual and Isentropic Change in Enthalpy Formula

LaTeX Go

Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy
η_c = ΔH_S/ΔH

How does a compressor work?

The compression of gases may be accomplished in equipment with rotating blades (like a turbine operating in reverse) or in cylinders with reciprocating pistons. Rotary equipment is used for high-volume flow where the discharge pressure is not too high. For high pressures, reciprocating compressors are often required. The energy equations are independent of the type of equipment; indeed, they are the same as for turbines or expanders because here, too, potential and kinetic energy changes are presumed negligible.

How to Calculate Compressor Efficiency using Actual and Isentropic Change in Enthalpy?

Compressor Efficiency using Actual and Isentropic Change in Enthalpy calculator uses Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy to calculate the Compressor Efficiency, The Compressor Efficiency using Actual and Isentropic Change in Enthalpy formula is defined as the ratio of the change in enthalpy done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to actual change in enthalpy done by the compressor. Compressor Efficiency is denoted by η_c symbol.

How to calculate Compressor Efficiency using Actual and Isentropic Change in Enthalpy using this online calculator? To use this online calculator for Compressor Efficiency using Actual and Isentropic Change in Enthalpy, enter Change in Enthalpy (Isentropic) (ΔH_S) & Change in Enthalpy (ΔH) and hit the calculate button. Here is how the Compressor Efficiency using Actual and Isentropic Change in Enthalpy calculation can be explained with given input values -> 1.631579 = 310/190.

FAQ

What is Compressor Efficiency using Actual and Isentropic Change in Enthalpy?

The Compressor Efficiency using Actual and Isentropic Change in Enthalpy formula is defined as the ratio of the change in enthalpy done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to actual change in enthalpy done by the compressor and is represented as η_c = ΔH_S/ΔH or Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy. Change in Enthalpy (Isentropic) is the thermodynamic quantity equivalent to the total difference between the heat content of a system under reversible and adiabatic conditions & Change in enthalpy is the thermodynamic quantity equivalent to the total difference between the heat content of a system.

How to calculate Compressor Efficiency using Actual and Isentropic Change in Enthalpy?

The Compressor Efficiency using Actual and Isentropic Change in Enthalpy formula is defined as the ratio of the change in enthalpy done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to actual change in enthalpy done by the compressor is calculated using Compressor Efficiency = Change in Enthalpy (Isentropic)/Change in Enthalpy. To calculate Compressor Efficiency using Actual and Isentropic Change in Enthalpy, you need Change in Enthalpy (Isentropic) (ΔH_S) & Change in Enthalpy (ΔH). With our tool, you need to enter the respective value for Change in Enthalpy (Isentropic) & Change in Enthalpy and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Compressor Efficiency?

In this formula, Compressor Efficiency uses Change in Enthalpy (Isentropic) & Change in Enthalpy. We can use 1 other way(s) to calculate the same, which is/are as follows -

Compressor Efficiency = Shaft Work (Isentropic)/Actual Shaft Work

Home

FREE PDFs

🔍 Search