Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar Calculator

✖Load on cotter joint is basically the amount of load/force any part or joint, can bear or is acted upon or exerts.ⓘ Load on Cotter Joint [L]			+10% -10%
✖Diameter of socket collar is the external diameter of collar of the socket of a cotter joint.ⓘ Diameter of Socket Collar [d₄]			+10% -10%
✖The diameter of Spigot is defined as the diameter of the external surface of the spigot or the inner diameter of the socket.ⓘ Diameter of Spigot [d₂]			+10% -10%
✖Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.ⓘ Thickness of Cotter [t_c]			+10% -10%

✖Compressive Stress In Socket is the amount of stress generated into the socket due to the compressive force onto it.ⓘ Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar [σ_cso]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength and Stress Formulas PDF PDF Image

Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressive Stress In Socket = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Thickness of Cotter)
σ_cso = (L)/((d₄-d₂)*t_c)
This formula uses 5 Variables

Variables Used

Compressive Stress In Socket - (Measured in Pascal) - Compressive Stress In Socket is the amount of stress generated into the socket due to the compressive force onto it.
Load on Cotter Joint - (Measured in Newton) - Load on cotter joint is basically the amount of load/force any part or joint, can bear or is acted upon or exerts.
Diameter of Socket Collar - (Measured in Meter) - Diameter of socket collar is the external diameter of collar of the socket of a cotter joint.
Diameter of Spigot - (Measured in Meter) - The diameter of Spigot is defined as the diameter of the external surface of the spigot or the inner diameter of the socket.
Thickness of Cotter - (Measured in Meter) - Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.

STEP 1: Convert Input(s) to Base Unit

Load on Cotter Joint: 50000 Newton --> 50000 Newton No Conversion Required
Diameter of Socket Collar: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Spigot: 40 Millimeter --> 0.04 Meter (Check conversion here)
Thickness of Cotter: 21.478 Millimeter --> 0.021478 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_cso = (L)/((d₄-d₂)*t_c) --> (50000)/((0.08-0.04)*0.021478)

Evaluating ... ...

σ_cso = 58199087.438309

STEP 3: Convert Result to Output's Unit

58199087.438309 Pascal -->58.199087438309 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

58.199087438309 ≈ 58.19909 Newton per Square Millimeter <-- Compressive Stress In Socket

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Cotter Joint » Mechanical » Strength and Stress » Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Strength and Stress Calculators

Tensile Stress in Spigot of Cotter Joint given Diameter of Spigot, Thickenss of Cotter and Load

LaTeX Go Tensile Stress In Spigot = (Load on Cotter Joint)/((pi*Diameter of Spigot^2)/4-Diameter of Spigot*Thickness of Cotter)

Shear Stress in Spigot of Cotter Joint given Diameter of Spigot and Load

LaTeX Go Shear Stress in Spigot = (Load on Cotter Joint)/(2*Gap between End of Slot to End of Spigot*Diameter of Spigot)

Tensile Stress in Rod of Cotter Joint

LaTeX Go Tensile Stress in Cotter Joint Rod = (4*Load on Cotter Joint)/(pi*Diameter of Rod of Cotter Joint^2)

Shear Stress in Cotter given Cotter Thickness and Width

LaTeX Go Shear Stress in Cotter = (Load on Cotter Joint)/(2*Thickness of Cotter*Mean Width of Cotter)

Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar Formula

LaTeX Go

Compressive Stress In Socket = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Thickness of Cotter)
σ_cso = (L)/((d₄-d₂)*t_c)

What is a socket?

Socket is the female part of the cotter joint, it also has a rectangular slot for passing the cotter through it. It has a circular hole in which the spigot fits.

How to Calculate Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar?

Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar calculator uses Compressive Stress In Socket = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Thickness of Cotter) to calculate the Compressive Stress In Socket, Compressive stress in socket of cotter joint given diameter of spigot and of socket collar is the amount of stress in the socket of the cotter joint due to the force trying to compress or crush the socket. Compressive Stress In Socket is denoted by σ_cso symbol.

How to calculate Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar using this online calculator? To use this online calculator for Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar, enter Load on Cotter Joint (L), Diameter of Socket Collar (d₄), Diameter of Spigot (d₂) & Thickness of Cotter (t_c) and hit the calculate button. Here is how the Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar calculation can be explained with given input values -> 5.8E-5 = (50000)/((0.08-0.04)*0.021478).

FAQ

What is Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar?

Compressive stress in socket of cotter joint given diameter of spigot and of socket collar is the amount of stress in the socket of the cotter joint due to the force trying to compress or crush the socket and is represented as σ_cso = (L)/((d₄-d₂)*t_c) or Compressive Stress In Socket = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Thickness of Cotter). Load on cotter joint is basically the amount of load/force any part or joint, can bear or is acted upon or exerts, Diameter of socket collar is the external diameter of collar of the socket of a cotter joint, The diameter of Spigot is defined as the diameter of the external surface of the spigot or the inner diameter of the socket & Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.

How to calculate Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar?

Compressive stress in socket of cotter joint given diameter of spigot and of socket collar is the amount of stress in the socket of the cotter joint due to the force trying to compress or crush the socket is calculated using Compressive Stress In Socket = (Load on Cotter Joint)/((Diameter of Socket Collar-Diameter of Spigot)*Thickness of Cotter). To calculate Compressive Stress in Socket of Cotter Joint given Diameter of Spigot and of Socket Collar, you need Load on Cotter Joint (L), Diameter of Socket Collar (d₄), Diameter of Spigot (d₂) & Thickness of Cotter (t_c). With our tool, you need to enter the respective value for Load on Cotter Joint, Diameter of Socket Collar, Diameter of Spigot & Thickness of Cotter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search