Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.ⓘ Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions [σ_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)
σ_c = L/(2*a*d)
This formula uses 4 Variables

Variables Used

Compressive Stress in Knuckle Pin - (Measured in Pascal) - Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Thickess of Fork Eye of Knuckle Joint: 26.6 Millimeter --> 0.0266 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_c = L/(2*a*d) --> 45000/(2*0.0266*0.037)

Evaluating ... ...

σ_c = 22861207.0717334

STEP 3: Convert Result to Output's Unit

22861207.0717334 Pascal -->22.8612070717334 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

22.8612070717334 ≈ 22.86121 Newton per Square Millimeter <-- Compressive Stress in Knuckle Pin

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions Formula

LaTeX Go

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)
σ_c = L/(2*a*d)

Applications of knuckle joint

1. Tie rod joint of a roof truss.
2. Tension link in bridge structure.
3. Link of roller chain.
4. Tie rod joint of jib crane.
5. The knuckle joint is also used in tractor.

How to Calculate Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions?

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions calculator uses Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin) to calculate the Compressive Stress in Knuckle Pin, The Compressive stress in pin inside fork of knuckle joint given load and pin dimensions is the amount of compressive stress into the pin of the knuckle joint which is in contact inside the fork eye. Compressive Stress in Knuckle Pin is denoted by σ_c symbol.

How to calculate Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions using this online calculator? To use this online calculator for Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions, enter Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions calculation can be explained with given input values -> 2.5E-5 = 45000/(2*0.0266*0.037).

FAQ

What is Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions?

The Compressive stress in pin inside fork of knuckle joint given load and pin dimensions is the amount of compressive stress into the pin of the knuckle joint which is in contact inside the fork eye and is represented as σ_c = L/(2*a*d) or Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions?

The Compressive stress in pin inside fork of knuckle joint given load and pin dimensions is the amount of compressive stress into the pin of the knuckle joint which is in contact inside the fork eye is calculated using Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin). To calculate Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions, you need Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Compressive Stress in Knuckle Pin?

In this formula, Compressive Stress in Knuckle Pin uses Load on Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 1 other way(s) to calculate the same, which is/are as follows -

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Home

FREE PDFs

🔍 Search