Column Load for given Base Plate Area Solution

STEP 0: Pre-Calculation Summary
Formula Used
Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete
Cl = A1*0.7*fc'
This formula uses 3 Variables
Variables Used
Column Load - (Measured in Newton) - Column Load is the total vertical force or weight that a column in a structure is designed to support. This includes the self-weight and weight from other parts of the structure.
Area required by Bearing Plate - (Measured in Square Meter) - Area required by Bearing Plate is the space occupied by the bearing plate on concrete.
Specified Compressive Strength of Concrete - (Measured in Pascal) - Specified Compressive Strength of Concrete is the capacity of concrete to withstand applied loads on its surface without exhibiting cracks or deformations.
STEP 1: Convert Input(s) to Base Unit
Area required by Bearing Plate: 23980 Square Millimeter --> 0.02398 Square Meter (Check conversion ​here)
Specified Compressive Strength of Concrete: 28 Megapascal --> 28000000 Pascal (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Cl = A1*0.7*fc' --> 0.02398*0.7*28000000
Evaluating ... ...
Cl = 470008
STEP 3: Convert Result to Output's Unit
470008 Newton -->470.008 Kilonewton (Check conversion ​here)
FINAL ANSWER
470.008 Kilonewton <-- Column Load
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Column Base Plates Calculators

Plate Length
​ LaTeX ​ Go Bearing or Plate Length = sqrt(Area required by Bearing Plate)+(0.5*((0.95*Column Depth)-(0.80*Width of Plate)))
Thickness of Plate
​ LaTeX ​ Go Minimum Plate Thickness = 2*Limiting Size*sqrt(Actual Bearing Pressure/Yield Stress of Steel)
Area Required by Base Plate
​ LaTeX ​ Go Area required by Bearing Plate = Column Load/(0.7*Specified Compressive Strength of Concrete)
Column Load for given Base Plate Area
​ LaTeX ​ Go Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete

Column Load for given Base Plate Area Formula

​LaTeX ​Go
Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete
Cl = A1*0.7*fc'

What is Base Plate & types of Columns based on Slenderness Ratio?

The Base plates are usually used to distribute column loads over a large enough area of supporting concrete construction that the design bearing strength of the concrete is not exceeded. It acts as a support to transfer the compression load acting over the columns. Column bases are usually assumed to be subject to axial compression and shear only.
Types of columns are as follows:
Long or Slender column: Length is more than critical buckling length and hence fails due to buckling.
Short column: The length is less than the critical buckling length and it fails by shearing.

What is the difference between Columns and Struts?

The Strut is mainly used in roof trusses and steel bridges. The main purpose of a strut is to maintain the rigidity of the structure and to take compressive force and is not designed to take any gravity load, but
the column is designed for various types of loads acting on it such as axial load bending moment gravity load shear forces buckling and horizontal load like earthquake load and wind load.
Both Column and Strut are comprehensive members but the main difference between them is column is a comprehensive member of the frame structure and the strut is a comprehensive member of the truss structure.

How to Calculate Column Load for given Base Plate Area?

Column Load for given Base Plate Area calculator uses Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete to calculate the Column Load, The Column Load for given Base Plate Area formula is defined as the relation between compressive strength and the area of the base plate. Column Load is denoted by Cl symbol.

How to calculate Column Load for given Base Plate Area using this online calculator? To use this online calculator for Column Load for given Base Plate Area, enter Area required by Bearing Plate (A1) & Specified Compressive Strength of Concrete (fc') and hit the calculate button. Here is how the Column Load for given Base Plate Area calculation can be explained with given input values -> 0.119636 = 0.02398*0.7*28000000.

FAQ

What is Column Load for given Base Plate Area?
The Column Load for given Base Plate Area formula is defined as the relation between compressive strength and the area of the base plate and is represented as Cl = A1*0.7*fc' or Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete. Area required by Bearing Plate is the space occupied by the bearing plate on concrete & Specified Compressive Strength of Concrete is the capacity of concrete to withstand applied loads on its surface without exhibiting cracks or deformations.
How to calculate Column Load for given Base Plate Area?
The Column Load for given Base Plate Area formula is defined as the relation between compressive strength and the area of the base plate is calculated using Column Load = Area required by Bearing Plate*0.7*Specified Compressive Strength of Concrete. To calculate Column Load for given Base Plate Area, you need Area required by Bearing Plate (A1) & Specified Compressive Strength of Concrete (fc'). With our tool, you need to enter the respective value for Area required by Bearing Plate & Specified Compressive Strength of Concrete and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!