Collector Current when Saturation Current due to DC Voltage Calculator

✖Saturation Current is the diode leakage current density in the absence of light. It is an important parameter which differentiates one diode from another.ⓘ Saturation Current [I_sat]			+10% -10%
✖Base-Emitter Voltage is the forward voltage between the base and emitter of the transistor.ⓘ Base-Emitter Voltage [V_BE]			+10% -10%
✖Thermal Voltage is the voltage produced within the p-n junction.ⓘ Thermal Voltage [V_t]			+10% -10%
✖Saturation current for DC is the transistor leakage current density in the absence of light. It is an important parameter that differentiates one transistor from another.ⓘ Saturation Current for DC [I_SC]			+10% -10%
✖Base-Collector Voltage is the electric potential between the base and collector region of a transistor.ⓘ Base-Collector Voltage [V_BC]			+10% -10%

✖Collector current is an amplified output current of a bipolar junction transistor.ⓘ Collector Current when Saturation Current due to DC Voltage [I_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download BJT Formula PDF PDF Image

Collector Current when Saturation Current due to DC Voltage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage)
I_c = I_sat*e^(V_BE/V_t)-I_SC*e^(V_BC/V_t)
This formula uses 1 Constants, 6 Variables

Constants Used

e - Napier's constant Value Taken As 2.71828182845904523536028747135266249

Variables Used

Collector Current - (Measured in Ampere) - Collector current is an amplified output current of a bipolar junction transistor.
Saturation Current - (Measured in Ampere) - Saturation Current is the diode leakage current density in the absence of light. It is an important parameter which differentiates one diode from another.
Base-Emitter Voltage - (Measured in Volt) - Base-Emitter Voltage is the forward voltage between the base and emitter of the transistor.
Thermal Voltage - (Measured in Volt) - Thermal Voltage is the voltage produced within the p-n junction.
Saturation Current for DC - (Measured in Ampere) - Saturation current for DC is the transistor leakage current density in the absence of light. It is an important parameter that differentiates one transistor from another.
Base-Collector Voltage - (Measured in Volt) - Base-Collector Voltage is the electric potential between the base and collector region of a transistor.

STEP 1: Convert Input(s) to Base Unit

Saturation Current: 1.675 Milliampere --> 0.001675 Ampere (Check conversion here)
Base-Emitter Voltage: 5.15 Volt --> 5.15 Volt No Conversion Required
Thermal Voltage: 4.7 Volt --> 4.7 Volt No Conversion Required
Saturation Current for DC: 0.5 Milliampere --> 0.0005 Ampere (Check conversion here)
Base-Collector Voltage: 2 Volt --> 2 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_c = I_sat*e^(V_BE/V_t)-I_SC*e^(V_BC/V_t) --> 0.001675*e^(5.15/4.7)-0.0005*e^(2/4.7)

Evaluating ... ...

I_c = 0.00424540878770408

STEP 3: Convert Result to Output's Unit

0.00424540878770408 Ampere -->4.24540878770408 Milliampere (Check conversion here)

FINAL ANSWER

4.24540878770408 ≈ 4.245409 Milliampere <-- Collector Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » BJT » Analog Electronics » Current » Collector Current » Collector Current when Saturation Current due to DC Voltage

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Collector Current Calculators

Collector Current when Saturation Current due to DC Voltage

LaTeX Go Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage)

Collector Current using Early Voltage for NPN Transistor

LaTeX Go Collector Current = Saturation Current*e^(Base-Collector Voltage/Thermal Voltage)*(1+Collector-Emitter Voltage/Supply Voltage)

Collector Current using Leakage Current

LaTeX Go Collector Current = (Base Current*Common Emitter Current Gain)+Collector Emitter Leakage Current

Collector Current of PNP Transistor when Common-Emitter Current Gain

LaTeX Go Collector Current = Forced Common-Emitter Current Gain*Base Current

Collector Current when Saturation Current due to DC Voltage Formula

LaTeX Go

Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage)
I_c = I_sat*e^(V_BE/V_t)-I_SC*e^(V_BC/V_t)

What is saturation collector current?

Saturation, as the name might imply, is where the base current has increased well beyond the point that the emitter-base junction is forward biased. In fact, the base current has increased beyond the point where it can cause the collector current flow to increase.

How to Calculate Collector Current when Saturation Current due to DC Voltage?

Collector Current when Saturation Current due to DC Voltage calculator uses Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage) to calculate the Collector Current, The Collector current when saturation current due to DC voltage carried by the electrons that reach the collector region. Its direction will be opposite to that of the flow of electrons, and thus into the collector terminal. Collector Current is denoted by I_c symbol.

How to calculate Collector Current when Saturation Current due to DC Voltage using this online calculator? To use this online calculator for Collector Current when Saturation Current due to DC Voltage, enter Saturation Current (I_sat), Base-Emitter Voltage (V_BE), Thermal Voltage (V_t), Saturation Current for DC (I_SC) & Base-Collector Voltage (V_BC) and hit the calculate button. Here is how the Collector Current when Saturation Current due to DC Voltage calculation can be explained with given input values -> 4245.409 = 0.001675*e^(5.15/4.7)-0.0005*e^(2/4.7).

FAQ

What is Collector Current when Saturation Current due to DC Voltage?

The Collector current when saturation current due to DC voltage carried by the electrons that reach the collector region. Its direction will be opposite to that of the flow of electrons, and thus into the collector terminal and is represented as I_c = I_sat*e^(V_BE/V_t)-I_SC*e^(V_BC/V_t) or Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage). Saturation Current is the diode leakage current density in the absence of light. It is an important parameter which differentiates one diode from another, Base-Emitter Voltage is the forward voltage between the base and emitter of the transistor, Thermal Voltage is the voltage produced within the p-n junction, Saturation current for DC is the transistor leakage current density in the absence of light. It is an important parameter that differentiates one transistor from another & Base-Collector Voltage is the electric potential between the base and collector region of a transistor.

How to calculate Collector Current when Saturation Current due to DC Voltage?

The Collector current when saturation current due to DC voltage carried by the electrons that reach the collector region. Its direction will be opposite to that of the flow of electrons, and thus into the collector terminal is calculated using Collector Current = Saturation Current*e^(Base-Emitter Voltage/Thermal Voltage)-Saturation Current for DC*e^(Base-Collector Voltage/Thermal Voltage). To calculate Collector Current when Saturation Current due to DC Voltage, you need Saturation Current (I_sat), Base-Emitter Voltage (V_BE), Thermal Voltage (V_t), Saturation Current for DC (I_SC) & Base-Collector Voltage (V_BC). With our tool, you need to enter the respective value for Saturation Current, Base-Emitter Voltage, Thermal Voltage, Saturation Current for DC & Base-Collector Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Collector Current?

In this formula, Collector Current uses Saturation Current, Base-Emitter Voltage, Thermal Voltage, Saturation Current for DC & Base-Collector Voltage. We can use 3 other way(s) to calculate the same, which is/are as follows -

Collector Current = (Base Current*Common Emitter Current Gain)+Collector Emitter Leakage Current
Collector Current = Forced Common-Emitter Current Gain*Base Current
Collector Current = Saturation Current*e^(Base-Collector Voltage/Thermal Voltage)*(1+Collector-Emitter Voltage/Supply Voltage)

Home

FREE PDFs

🔍 Search