Collector Base Capacitance Calculator

✖Cut-off frequency in BJT is defined as corner frequency is a boundary in system's frequency response at which energy flowing through system begins to be reduced rather than passing through.ⓘ Cut-off Frequency in BJT [f_co]			+10% -10%
✖Maximum frequency of oscillations is defined as the practical upper bound for useful circuit operation with BJT.ⓘ Maximum Frequency of Oscillations [f_m]			+10% -10%
✖Base resistance is the resistance of the base junction.ⓘ Base Resistance [R_b]			+10% -10%

✖Collector Base Capacitance refers to the capacitance that exists between the collector and the base of a bipolar junction transistor (BJT).ⓘ Collector Base Capacitance [C_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download BJT Microwave Devices Formulas PDF PDF Image

Collector Base Capacitance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Collector Base Capacitance = Cut-off Frequency in BJT/(8*pi*Maximum Frequency of Oscillations^2*Base Resistance)
C_c = f_co/(8*pi*f_m^2*R_b)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Collector Base Capacitance - (Measured in Farad) - Collector Base Capacitance refers to the capacitance that exists between the collector and the base of a bipolar junction transistor (BJT).
Cut-off Frequency in BJT - (Measured in Hertz) - Cut-off frequency in BJT is defined as corner frequency is a boundary in system's frequency response at which energy flowing through system begins to be reduced rather than passing through.
Maximum Frequency of Oscillations - (Measured in Hertz) - Maximum frequency of oscillations is defined as the practical upper bound for useful circuit operation with BJT.
Base Resistance - (Measured in Ohm) - Base resistance is the resistance of the base junction.

STEP 1: Convert Input(s) to Base Unit

Cut-off Frequency in BJT: 30 Hertz --> 30 Hertz No Conversion Required
Maximum Frequency of Oscillations: 69 Hertz --> 69 Hertz No Conversion Required
Base Resistance: 0.98 Ohm --> 0.98 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_c = f_co/(8*pi*f_m^2*R_b) --> 30/(8*pi*69^2*0.98)

Evaluating ... ...

C_c = 0.000255833338303395

STEP 3: Convert Result to Output's Unit

0.000255833338303395 Farad -->255.833338303395 Microfarad (Check conversion here)

FINAL ANSWER

255.833338303395 ≈ 255.8333 Microfarad <-- Collector Base Capacitance

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Semiconductor Devices » BJT Microwave Devices » Collector Base Capacitance

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< BJT Microwave Devices Calculators

Base Collector Delay Time

LaTeX Go Base Collector Delay Time = Emitter Collector Delay Time-(Collector Charging Time+Base Transit Time+Emitter Charging Time)

Collector Charging Time

LaTeX Go Collector Charging Time = Emitter Collector Delay Time-(Base Collector Delay Time+Base Transit Time+Emitter Charging Time)

Base Transit Time

LaTeX Go Base Transit Time = Emitter Collector Delay Time-(Base Collector Delay Time+Collector Charging Time+Emitter Charging Time)

Cut-off Frequency of Microwave

LaTeX Go Cut-off Frequency in BJT = 1/(2*pi*Emitter Collector Delay Time)

Collector Base Capacitance Formula

LaTeX Go

Collector Base Capacitance = Cut-off Frequency in BJT/(8*pi*Maximum Frequency of Oscillations^2*Base Resistance)
C_c = f_co/(8*pi*f_m^2*R_b)

What is Frequency of Oscillation Wave?

Frequency of oscillation (f) (or just frequency): the number of times the wave pattern repeats itself in one second

How to Calculate Collector Base Capacitance?

Collector Base Capacitance calculator uses Collector Base Capacitance = Cut-off Frequency in BJT/(8*pi*Maximum Frequency of Oscillations^2*Base Resistance) to calculate the Collector Base Capacitance, Collector Base Capacitance refers to the capacitance that exists between the collector and the base of a bipolar junction transistor (BJT). This capacitance arises due to the depletion region that forms at the collector-base junction when the transistor is biased in the forward-active mode. Collector Base Capacitance is denoted by C_c symbol.

How to calculate Collector Base Capacitance using this online calculator? To use this online calculator for Collector Base Capacitance, enter Cut-off Frequency in BJT (f_co), Maximum Frequency of Oscillations (f_m) & Base Resistance (R_b) and hit the calculate button. Here is how the Collector Base Capacitance calculation can be explained with given input values -> 2.6E+8 = 30/(8*pi*69^2*0.98).

FAQ

What is Collector Base Capacitance?

Collector Base Capacitance refers to the capacitance that exists between the collector and the base of a bipolar junction transistor (BJT). This capacitance arises due to the depletion region that forms at the collector-base junction when the transistor is biased in the forward-active mode and is represented as C_c = f_co/(8*pi*f_m^2*R_b) or Collector Base Capacitance = Cut-off Frequency in BJT/(8*pi*Maximum Frequency of Oscillations^2*Base Resistance). Cut-off frequency in BJT is defined as corner frequency is a boundary in system's frequency response at which energy flowing through system begins to be reduced rather than passing through, Maximum frequency of oscillations is defined as the practical upper bound for useful circuit operation with BJT & Base resistance is the resistance of the base junction.

How to calculate Collector Base Capacitance?

Collector Base Capacitance refers to the capacitance that exists between the collector and the base of a bipolar junction transistor (BJT). This capacitance arises due to the depletion region that forms at the collector-base junction when the transistor is biased in the forward-active mode is calculated using Collector Base Capacitance = Cut-off Frequency in BJT/(8*pi*Maximum Frequency of Oscillations^2*Base Resistance). To calculate Collector Base Capacitance, you need Cut-off Frequency in BJT (f_co), Maximum Frequency of Oscillations (f_m) & Base Resistance (R_b). With our tool, you need to enter the respective value for Cut-off Frequency in BJT, Maximum Frequency of Oscillations & Base Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search