Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction Calculator

✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Total height of wall which is under the consideration.ⓘ Total Height of Wall [h_w]			+10% -10%
✖Total Thrust of Soil is the force acting on unit length of soil.ⓘ Total Thrust of Soil [P]			+10% -10%

✖Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Lateral Pressure for Cohesive and Non Cohesive Soil Formulas PDF PDF Image

Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cohesion in Soil as Kilopascal = ((0.25*Unit Weight of Soil*Total Height of Wall)-(0.5*Total Thrust of Soil/Total Height of Wall))
C = ((0.25*γ*h_w)-(0.5*P/h_w))
This formula uses 4 Variables

Variables Used

Cohesion in Soil as Kilopascal - (Measured in Pascal) - Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Total Height of Wall - (Measured in Meter) - Total height of wall which is under the consideration.
Total Thrust of Soil - (Measured in Newton per Meter) - Total Thrust of Soil is the force acting on unit length of soil.

STEP 1: Convert Input(s) to Base Unit

Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Total Height of Wall: 3.1 Meter --> 3.1 Meter No Conversion Required
Total Thrust of Soil: 10 Kilonewton per Meter --> 10000 Newton per Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = ((0.25*γ*h_w)-(0.5*P/h_w)) --> ((0.25*18000*3.1)-(0.5*10000/3.1))

Evaluating ... ...

C = 12337.0967741935

STEP 3: Convert Result to Output's Unit

12337.0967741935 Pascal -->12.3370967741935 Kilopascal (Check conversion here)

FINAL ANSWER

12.3370967741935 ≈ 12.3371 Kilopascal <-- Cohesion in Soil as Kilopascal

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Lateral Pressure for Cohesive and Non Cohesive Soil » Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Lateral Pressure for Cohesive and Non Cohesive Soil Calculators

Total Height of Wall given Total Thrust from Soil that are Free to move

LaTeX Go Total Height of Wall = sqrt((2*Total Thrust of Soil)/(Unit Weight of Soil*cos(Angle of Inclination)*((cos(Angle of Inclination)-sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2))/(cos(Angle of Inclination)+sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2)))))

Unit Weight of Soil given Total Thrust from Soil that are Free to Move

LaTeX Go Unit Weight of Soil = (2*Total Thrust of Soil)/((Total Height of Wall)^2*cos(Angle of Inclination))*((cos(Angle of Inclination)-sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2))/(cos(Angle of Inclination)+sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2)))

Total Thrust from Soil that are Free to Move

LaTeX Go Total Thrust of Soil = (0.5*Unit Weight of Soil*(Total Height of Wall)^2*cos(Angle of Inclination))*((cos(Angle of Inclination)-sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2))/(cos(Angle of Inclination)+sqrt((cos(Angle of Inclination))^2-(cos(Angle of Internal Friction))^2)))

Total Thrust from Soil when Surface behind Wall is Level

LaTeX Go Total Thrust of Soil = (0.5*Unit Weight of Soil*(Total Height of Wall)^2*Coefficient of Active Pressure)

Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction Formula

LaTeX Go

Cohesion in Soil as Kilopascal = ((0.25*Unit Weight of Soil*Total Height of Wall)-(0.5*Total Thrust of Soil/Total Height of Wall))
C = ((0.25*γ*h_w)-(0.5*P/h_w))

What is Cohesion?

Cohesion means the intermolecular attractive force acting between two adjacent portions of a substance, particularly of a solid or liquid.It is this force that holds a piece of matter together. Intermolecular forces act also between two dissimilar substances in contact, a phenomenon called adhesion.

How to Calculate Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction?

Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction calculator uses Cohesion in Soil as Kilopascal = ((0.25*Unit Weight of Soil*Total Height of Wall)-(0.5*Total Thrust of Soil/Total Height of Wall)) to calculate the Cohesion in Soil as Kilopascal, The Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction is defined as intermolecular attractive force acting between two adjacent portions of substance, particularly of solid or liquid. Cohesion in Soil as Kilopascal is denoted by C symbol.

How to calculate Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction using this online calculator? To use this online calculator for Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction, enter Unit Weight of Soil (γ), Total Height of Wall (h_w) & Total Thrust of Soil (P) and hit the calculate button. Here is how the Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction calculation can be explained with given input values -> 0.012337 = ((0.25*18000*3.1)-(0.5*10000/3.1)).

FAQ

What is Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction?

The Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction is defined as intermolecular attractive force acting between two adjacent portions of substance, particularly of solid or liquid and is represented as C = ((0.25*γ*h_w)-(0.5*P/h_w)) or Cohesion in Soil as Kilopascal = ((0.25*Unit Weight of Soil*Total Height of Wall)-(0.5*Total Thrust of Soil/Total Height of Wall)). Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Total height of wall which is under the consideration & Total Thrust of Soil is the force acting on unit length of soil.

How to calculate Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction?

The Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction is defined as intermolecular attractive force acting between two adjacent portions of substance, particularly of solid or liquid is calculated using Cohesion in Soil as Kilopascal = ((0.25*Unit Weight of Soil*Total Height of Wall)-(0.5*Total Thrust of Soil/Total Height of Wall)). To calculate Cohesion of soil given Total Thrust from Soil with Small Angles of Internal Friction, you need Unit Weight of Soil (γ), Total Height of Wall (h_w) & Total Thrust of Soil (P). With our tool, you need to enter the respective value for Unit Weight of Soil, Total Height of Wall & Total Thrust of Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cohesion in Soil as Kilopascal?

In this formula, Cohesion in Soil as Kilopascal uses Unit Weight of Soil, Total Height of Wall & Total Thrust of Soil. We can use 1 other way(s) to calculate the same, which is/are as follows -

Cohesion in Soil as Kilopascal = (0.25*Unit Weight of Soil*Total Height of Wall*sqrt(Coefficient of Active Pressure))-(0.5*Total Thrust of Soil/Total Height of Wall*sqrt(Coefficient of Active Pressure))

Home

FREE PDFs

🔍 Search