Cohesion of Soil given Safe Bearing Capacity Calculator

✖Safe Bearing Capacity is the maximum pressure which the soil can carry safely without risk of shear failure.ⓘ Safe Bearing Capacity [q_sa]			+10% -10%
✖Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.ⓘ Factor of Safety [f_s]			+10% -10%
✖Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge [σ']			+10% -10%
✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%

✖Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion of Soil given Safe Bearing Capacity [C_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Terzaghi's Analysis in Water Table is Below the Base of Footing Formulas PDF PDF Image

Cohesion of Soil given Safe Bearing Capacity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cohesion of Soil = (((Safe Bearing Capacity*Factor of Safety)-(Factor of Safety*Effective Surcharge))-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion
C_s = (((q_sa*f_s)-(f_s*σ'))-((σ_s*(N_q-1))+(0.5*γ*B*N_γ)))/N_c
This formula uses 10 Variables

Variables Used

Cohesion of Soil - (Measured in Pascal) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Safe Bearing Capacity - (Measured in Pascal) - Safe Bearing Capacity is the maximum pressure which the soil can carry safely without risk of shear failure.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
Effective Surcharge - (Measured in Pascal) - Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.

STEP 1: Convert Input(s) to Base Unit

Safe Bearing Capacity: 70 Kilonewton per Square Meter --> 70000 Pascal (Check conversion here)
Factor of Safety: 2.8 --> No Conversion Required
Effective Surcharge: 10 Pascal --> 10 Pascal No Conversion Required
Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_s = (((q_sa*f_s)-(f_s*σ'))-((σ_s*(N_q-1))+(0.5*γ*B*N_γ)))/N_c --> (((70000*2.8)-(2.8*10))-((45900*(2.01-1))+(0.5*18000*2*1.6)))/9

Evaluating ... ...

C_s = 13423.6666666667

STEP 3: Convert Result to Output's Unit

13423.6666666667 Pascal -->13.4236666666667 Kilopascal (Check conversion here)

FINAL ANSWER

13.4236666666667 ≈ 13.42367 Kilopascal <-- Cohesion of Soil

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Terzaghi's Analysis Shear Failure Theories » Terzaghi's Analysis in Water Table is Below the Base of Footing » Cohesion of Soil given Safe Bearing Capacity

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Terzaghi's Analysis in Water Table is Below the Base of Footing Calculators

Depth of Footing given Bearing Capacity Factor

LaTeX Go Depth of Footing in Soil = (Ultimate Bearing Capacity in Soil-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/(Unit Weight of Soil*Bearing Capacity Factor dependent on Surcharge)

Cohesion of Soil given Depth and Width of Footing

LaTeX Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity in Soil-((Unit Weight of Soil*Depth of Footing in Soil*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion

Ultimate Bearing Capacity given Bearing Capacity Factor

LaTeX Go Ultimate Bearing Capacity = (Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Unit Weight of Soil*Depth of Footing*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)

Unit Weight of Soil given Depth and Width of Footing

LaTeX Go Unit Weight of Soil = (Ultimate Bearing Capacity-(Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion))/((Depth of Footing*Bearing Capacity Factor dependent on Surcharge)+(0.5*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))

Cohesion of Soil given Safe Bearing Capacity Formula

LaTeX Go

What is Cohesion of Soil?

Cohesion is the force that holds together molecules or like particles within a soil. Cohesion, c, is usually determined in the laboratory from the Direct Shear Test.

How to Calculate Cohesion of Soil given Safe Bearing Capacity?

Cohesion of Soil given Safe Bearing Capacity calculator uses Cohesion of Soil = (((Safe Bearing Capacity*Factor of Safety)-(Factor of Safety*Effective Surcharge))-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion to calculate the Cohesion of Soil, The Cohesion of Soil given Safe Bearing Capacity is defined as the maximum pressure a soil can support without shear failure; cohesion contributes to soil strength. Cohesion of Soil is denoted by C_s symbol.

How to calculate Cohesion of Soil given Safe Bearing Capacity using this online calculator? To use this online calculator for Cohesion of Soil given Safe Bearing Capacity, enter Safe Bearing Capacity (q_sa), Factor of Safety (f_s), Effective Surcharge (σ'), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Bearing Capacity Factor dependent on Cohesion (N_c) and hit the calculate button. Here is how the Cohesion of Soil given Safe Bearing Capacity calculation can be explained with given input values -> 0.013475 = (((70000*2.8)-(2.8*10))-((45900*(2.01-1))+(0.5*18000*2*1.6)))/9.

FAQ

What is Cohesion of Soil given Safe Bearing Capacity?

The Cohesion of Soil given Safe Bearing Capacity is defined as the maximum pressure a soil can support without shear failure; cohesion contributes to soil strength and is represented as C_s = (((q_sa*f_s)-(f_s*σ'))-((σ_s*(N_q-1))+(0.5*γ*B*N_γ)))/N_c or Cohesion of Soil = (((Safe Bearing Capacity*Factor of Safety)-(Factor of Safety*Effective Surcharge))-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion. Safe Bearing Capacity is the maximum pressure which the soil can carry safely without risk of shear failure, Factor of Safety expresses how much stronger a system is than it needs to be for an intended load, Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.

How to calculate Cohesion of Soil given Safe Bearing Capacity?

The Cohesion of Soil given Safe Bearing Capacity is defined as the maximum pressure a soil can support without shear failure; cohesion contributes to soil strength is calculated using Cohesion of Soil = (((Safe Bearing Capacity*Factor of Safety)-(Factor of Safety*Effective Surcharge))-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion. To calculate Cohesion of Soil given Safe Bearing Capacity, you need Safe Bearing Capacity (q_sa), Factor of Safety (f_s), Effective Surcharge (σ'), Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Bearing Capacity Factor dependent on Cohesion (N_c). With our tool, you need to enter the respective value for Safe Bearing Capacity, Factor of Safety, Effective Surcharge, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Bearing Capacity Factor dependent on Cohesion and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cohesion of Soil?

In this formula, Cohesion of Soil uses Safe Bearing Capacity, Factor of Safety, Effective Surcharge, Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight & Bearing Capacity Factor dependent on Cohesion. We can use 1 other way(s) to calculate the same, which is/are as follows -

Cohesion of Soil = (Net Ultimate Bearing Capacity-((Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion

Home

FREE PDFs

🔍 Search