COG Position Distance from Rear Wheels given Front Lateral Load Transfer Calculator

✖Front Lateral Load Transfer is the load transfer on to the front wheels due to lateral acceleration.ⓘ Front Lateral Load Transfer [W_f]			+10% -10%
✖Lateral Acceleration is the acceleration in the lateral direction when the vehicle is cornering.ⓘ Lateral Acceleration [A_y]			+10% -10%
✖Mass of Vehicle is the total mass of the vehicle.ⓘ Mass of Vehicle [m]			+10% -10%
✖Front Track Width is the distance between the centers of front wheels.ⓘ Front Track Width [t_F]			+10% -10%
✖Centre of Gravity Distance to Roll Axis is the distance between the centre of gravity and the roll axis.ⓘ Centre of Gravity Distance to Roll Axis [H]			+10% -10%
✖Front Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration.ⓘ Front Roll Rate [K_Φf]			+10% -10%
✖Rear Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration.ⓘ Rear Roll Rate [K_Φr]			+10% -10%
✖Front Roll Centre Height is the height of the notional point at which the cornering forces in the suspension are reacted to the vehicle body.ⓘ Front Roll Centre Height [Z_rf]			+10% -10%
✖Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.ⓘ Wheelbase of Vehicle [b]			+10% -10%

✖Horizontal Distance of C.G. from Rear Axle is the distance of vehicle's center of gravity(C.G.) from rear axle measured along wheelbase of vehicle.ⓘ COG Position Distance from Rear Wheels given Front Lateral Load Transfer [x]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Front Lateral Load Transfer for Race Cars Formulas PDF PDF Image

COG Position Distance from Rear Wheels given Front Lateral Load Transfer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Horizontal Distance of C.G. from Rear Axle = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))/(Front Roll Centre Height/Wheelbase of Vehicle)
x = (W_f-A_y/[g]*m/t_F*H*K_Φf/(K_Φf+K_Φr))/(Z_rf/b)
This formula uses 1 Constants, 10 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Horizontal Distance of C.G. from Rear Axle - (Measured in Meter) - Horizontal Distance of C.G. from Rear Axle is the distance of vehicle's center of gravity(C.G.) from rear axle measured along wheelbase of vehicle.
Front Lateral Load Transfer - (Measured in Kilogram) - Front Lateral Load Transfer is the load transfer on to the front wheels due to lateral acceleration.
Lateral Acceleration - (Measured in Meter per Square Second) - Lateral Acceleration is the acceleration in the lateral direction when the vehicle is cornering.
Mass of Vehicle - (Measured in Kilogram) - Mass of Vehicle is the total mass of the vehicle.
Front Track Width - (Measured in Meter) - Front Track Width is the distance between the centers of front wheels.
Centre of Gravity Distance to Roll Axis - (Measured in Meter) - Centre of Gravity Distance to Roll Axis is the distance between the centre of gravity and the roll axis.
Front Roll Rate - (Measured in Newton Meter per Radian) - Front Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration.
Rear Roll Rate - (Measured in Newton Meter per Radian) - Rear Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration.
Front Roll Centre Height - (Measured in Meter) - Front Roll Centre Height is the height of the notional point at which the cornering forces in the suspension are reacted to the vehicle body.
Wheelbase of Vehicle - (Measured in Meter) - Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.

STEP 1: Convert Input(s) to Base Unit

Front Lateral Load Transfer: 226 Kilogram --> 226 Kilogram No Conversion Required
Lateral Acceleration: 9.81 Meter per Square Second --> 9.81 Meter per Square Second No Conversion Required
Mass of Vehicle: 155 Kilogram --> 155 Kilogram No Conversion Required
Front Track Width: 1.5 Meter --> 1.5 Meter No Conversion Required
Centre of Gravity Distance to Roll Axis: 0.335 Meter --> 0.335 Meter No Conversion Required
Front Roll Rate: 94900 Newton Meter per Radian --> 94900 Newton Meter per Radian No Conversion Required
Rear Roll Rate: 67800 Newton Meter per Radian --> 67800 Newton Meter per Radian No Conversion Required
Front Roll Centre Height: 245 Meter --> 245 Meter No Conversion Required
Wheelbase of Vehicle: 2.7 Meter --> 2.7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

x = (W_f-A_y/[g]*m/t_F*H*K_Φf/(K_Φf+K_Φr))/(Z_rf/b) --> (226-9.81/[g]*155/1.5*0.335*94900/(94900+67800))/(245/2.7)

Evaluating ... ...

x = 2.26802005752027

STEP 3: Convert Result to Output's Unit

2.26802005752027 Meter --> No Conversion Required

FINAL ANSWER

2.26802005752027 ≈ 2.26802 Meter <-- Horizontal Distance of C.G. from Rear Axle

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Automobile » Race Car Vehicle Dynamics » Vehicle Cornering in Race Cars » Mechanical » Front Lateral Load Transfer for Race Cars » COG Position Distance from Rear Wheels given Front Lateral Load Transfer

Credits

Created by Peri Krishna Karthik

National Institute of Technology Calicut (NIT Calicut), Calicut, Kerala

Peri Krishna Karthik has created this Calculator and 200+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Front Lateral Load Transfer for Race Cars Calculators

Lateral Acceleration given Front Lateral Load Transfer

LaTeX Go Lateral Acceleration = (Front Lateral Load Transfer-Horizontal Distance of C.G. from Rear Axle/Wheelbase of Vehicle*Front Roll Centre Height)/(1/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))

COG Position Distance from Rear Wheels given Front Lateral Load Transfer

LaTeX Go Horizontal Distance of C.G. from Rear Axle = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))/(Front Roll Centre Height/Wheelbase of Vehicle)

Front Roll Centre Height given Front Lateral Load Transfer

LaTeX Go Front Roll Centre Height = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))*Wheelbase of Vehicle/Horizontal Distance of C.G. from Rear Axle

Front Lateral Load Transfer

LaTeX Go Front Lateral Load Transfer = Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate)+Horizontal Distance of C.G. from Rear Axle/Wheelbase of Vehicle*Front Roll Centre Height

COG Position Distance from Rear Wheels given Front Lateral Load Transfer Formula

LaTeX Go

How does lateral load transfer occur?

Lateral load transfer occurs during cornering and is the shift of mass across the wheels due to the centrifugal force and the lateral acceleration. When a car is cornering it creates a force called centrifugal force. This force works against the lateral acceleration which is created by the grip from the tyres known as the tyre cornering forces.

What are the three mechanisms of lateral load transfer?

Lateral Load Transfer from Unsprung Mass: The simplest component of load transfer. If unsprung mass is isolated, it’s possible to find its own CG. When the car corners, lateral acceleration is applied at this CG, generating a centrifugal force which will result in a moment, that can be divided by the axle track to yield a lateral load transfer component.; Load Transfer from Direct Lateral Force (Kinematic Load Transfer Component): It is one of the two components related to the lateral force acting upon the sprung mass. It arises from the force coupling effect that roll centres have, directly linking forces on sprung mass to the unsprung mass.; Load Transfer Due to Roll Angle (Elastic Load Transfer Component): During spring displacements, a force on each spring arises, and these forces generate a moment that tends to resist the rotation of the body. These forces are reacted by the tyres, and that contributes to lateral load transfer. This component is also referred as the elastic weight transfer component.

How to Calculate COG Position Distance from Rear Wheels given Front Lateral Load Transfer?

COG Position Distance from Rear Wheels given Front Lateral Load Transfer calculator uses Horizontal Distance of C.G. from Rear Axle = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))/(Front Roll Centre Height/Wheelbase of Vehicle) to calculate the Horizontal Distance of C.G. from Rear Axle, The COG position distance from rear wheels given front lateral load transfer formula is used to find the horizontal distance of centre of gravity from the rear wheels when the front lateral load transfer is known. Horizontal Distance of C.G. from Rear Axle is denoted by x symbol.

How to calculate COG Position Distance from Rear Wheels given Front Lateral Load Transfer using this online calculator? To use this online calculator for COG Position Distance from Rear Wheels given Front Lateral Load Transfer, enter Front Lateral Load Transfer (W_f), Lateral Acceleration (A_y), Mass of Vehicle (m), Front Track Width (t_F), Centre of Gravity Distance to Roll Axis (H), Front Roll Rate (K_Φf), Rear Roll Rate (K_Φr), Front Roll Centre Height (Z_rf) & Wheelbase of Vehicle (b) and hit the calculate button. Here is how the COG Position Distance from Rear Wheels given Front Lateral Load Transfer calculation can be explained with given input values -> 2.26802 = (226-9.81/[g]*155/1.5*0.335*94900/(94900+67800))/(245/2.7).

FAQ

What is COG Position Distance from Rear Wheels given Front Lateral Load Transfer?

The COG position distance from rear wheels given front lateral load transfer formula is used to find the horizontal distance of centre of gravity from the rear wheels when the front lateral load transfer is known and is represented as x = (W_f-A_y/[g]*m/t_F*H*K_Φf/(K_Φf+K_Φr))/(Z_rf/b) or Horizontal Distance of C.G. from Rear Axle = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))/(Front Roll Centre Height/Wheelbase of Vehicle). Front Lateral Load Transfer is the load transfer on to the front wheels due to lateral acceleration, Lateral Acceleration is the acceleration in the lateral direction when the vehicle is cornering, Mass of Vehicle is the total mass of the vehicle, Front Track Width is the distance between the centers of front wheels, Centre of Gravity Distance to Roll Axis is the distance between the centre of gravity and the roll axis, Front Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration, Rear Roll Rate is the stiffness of your car in the roll mode. Or one can say, it is the roll angle per unit lateral acceleration, Front Roll Centre Height is the height of the notional point at which the cornering forces in the suspension are reacted to the vehicle body & Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.

How to calculate COG Position Distance from Rear Wheels given Front Lateral Load Transfer?

The COG position distance from rear wheels given front lateral load transfer formula is used to find the horizontal distance of centre of gravity from the rear wheels when the front lateral load transfer is known is calculated using Horizontal Distance of C.G. from Rear Axle = (Front Lateral Load Transfer-Lateral Acceleration/[g]*Mass of Vehicle/Front Track Width*Centre of Gravity Distance to Roll Axis*Front Roll Rate/(Front Roll Rate+Rear Roll Rate))/(Front Roll Centre Height/Wheelbase of Vehicle). To calculate COG Position Distance from Rear Wheels given Front Lateral Load Transfer, you need Front Lateral Load Transfer (W_f), Lateral Acceleration (A_y), Mass of Vehicle (m), Front Track Width (t_F), Centre of Gravity Distance to Roll Axis (H), Front Roll Rate (K_Φf), Rear Roll Rate (K_Φr), Front Roll Centre Height (Z_rf) & Wheelbase of Vehicle (b). With our tool, you need to enter the respective value for Front Lateral Load Transfer, Lateral Acceleration, Mass of Vehicle, Front Track Width, Centre of Gravity Distance to Roll Axis, Front Roll Rate, Rear Roll Rate, Front Roll Centre Height & Wheelbase of Vehicle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search