Coefficient of Permeability given Quantity of Seepage in Length of Dam Calculator

✖Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.ⓘ Discharge from Dam [Q_t]			+10% -10%
✖Equipotential Lines is defined as the number of lines with same potential drop.ⓘ Equipotential Lines [N]			+10% -10%
✖The Number of Beds is defined as the number of beds between each of the same potential drops.ⓘ Number of Beds [B]			+10% -10%
✖The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section.ⓘ Loss of Head [H_L]			+10% -10%
✖Length of Dam is the measurement or extent of something from end to end.ⓘ Length of Dam [L]			+10% -10%

✖The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.ⓘ Coefficient of Permeability given Quantity of Seepage in Length of Dam [k]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Earth Dam and Gravity Dam Formulas PDF PDF Image

Coefficient of Permeability given Quantity of Seepage in Length of Dam Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam)
k = (Q_t*N)/(B*H_L*L)
This formula uses 6 Variables

Variables Used

Coefficient of Permeability of Soil - (Measured in Meter per Second) - The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.
Discharge from Dam - (Measured in Cubic Meter per Second) - Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Equipotential Lines - Equipotential Lines is defined as the number of lines with same potential drop.
Number of Beds - The Number of Beds is defined as the number of beds between each of the same potential drops.
Loss of Head - (Measured in Meter) - The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section.
Length of Dam - (Measured in Meter) - Length of Dam is the measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Discharge from Dam: 0.46 Cubic Meter per Second --> 0.46 Cubic Meter per Second No Conversion Required
Equipotential Lines: 4 --> No Conversion Required
Number of Beds: 2 --> No Conversion Required
Loss of Head: 6.6 Meter --> 6.6 Meter No Conversion Required
Length of Dam: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

k = (Q_t*N)/(B*H_L*L) --> (0.46*4)/(2*6.6*3)

Evaluating ... ...

k = 0.0464646464646465

STEP 3: Convert Result to Output's Unit

0.0464646464646465 Meter per Second -->4.64646464646465 Centimeter per Second (Check conversion here)

FINAL ANSWER

4.64646464646465 ≈ 4.646465 Centimeter per Second <-- Coefficient of Permeability of Soil

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Earth Dam and Gravity Dam » Earth dam » Coefficient of permiability of earth dam » Coefficient of Permeability given Quantity of Seepage in Length of Dam

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Coefficient of permiability of earth dam Calculators

Coefficient of Permeability given Quantity of Seepage in Length of Dam

LaTeX Go Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam)

Coefficient of Permeability Given Seepage Discharge in Earth Dam

LaTeX Go Coefficient of Permeability of Soil = Discharge from Dam/(Hydraulic Gradient to Head Loss*Cross-Sectional Area of Base*Time Taken to Travel)

Coefficient of Permeability given Maximum and Minimum Permeability for Earth Dam

LaTeX Go Coefficient of Permeability of Soil = sqrt(Intrinsic Permeability*Relative Permeability)

Maximum Permeability given Coefficient of Permeability for Earth Dam

LaTeX Go Intrinsic Permeability = (Coefficient of Permeability of Soil^2)/(Relative Permeability)

Coefficient of Permeability given Quantity of Seepage in Length of Dam Formula

LaTeX Go

Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam)
k = (Q_t*N)/(B*H_L*L)

What is Darcy Law?

Darcy's law is an equation that describes the flow of a fluid through a porous medium. The law was formulated by Henry Darcy based on results of experiments .

How to Calculate Coefficient of Permeability given Quantity of Seepage in Length of Dam?

Coefficient of Permeability given Quantity of Seepage in Length of Dam calculator uses Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam) to calculate the Coefficient of Permeability of Soil, Coefficient of Permeability given Quantity of seepage in length of dam is a measure of the ease with which water can flow through a dam. It is determined by the quantity of seepage, or water flow, per unit length of the dam. Coefficient of Permeability of Soil is denoted by k symbol.

How to calculate Coefficient of Permeability given Quantity of Seepage in Length of Dam using this online calculator? To use this online calculator for Coefficient of Permeability given Quantity of Seepage in Length of Dam, enter Discharge from Dam (Q_t), Equipotential Lines (N), Number of Beds (B), Loss of Head (H_L) & Length of Dam (L) and hit the calculate button. Here is how the Coefficient of Permeability given Quantity of Seepage in Length of Dam calculation can be explained with given input values -> 1020.202 = (0.46*4)/(2*6.6*3).

FAQ

What is Coefficient of Permeability given Quantity of Seepage in Length of Dam?

Coefficient of Permeability given Quantity of seepage in length of dam is a measure of the ease with which water can flow through a dam. It is determined by the quantity of seepage, or water flow, per unit length of the dam and is represented as k = (Q_t*N)/(B*H_L*L) or Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam). Discharge from Dam is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material, Equipotential Lines is defined as the number of lines with same potential drop, The Number of Beds is defined as the number of beds between each of the same potential drops, The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section & Length of Dam is the measurement or extent of something from end to end.

How to calculate Coefficient of Permeability given Quantity of Seepage in Length of Dam?

Coefficient of Permeability given Quantity of seepage in length of dam is a measure of the ease with which water can flow through a dam. It is determined by the quantity of seepage, or water flow, per unit length of the dam is calculated using Coefficient of Permeability of Soil = (Discharge from Dam*Equipotential Lines)/(Number of Beds*Loss of Head*Length of Dam). To calculate Coefficient of Permeability given Quantity of Seepage in Length of Dam, you need Discharge from Dam (Q_t), Equipotential Lines (N), Number of Beds (B), Loss of Head (H_L) & Length of Dam (L). With our tool, you need to enter the respective value for Discharge from Dam, Equipotential Lines, Number of Beds, Loss of Head & Length of Dam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Coefficient of Permeability of Soil?

In this formula, Coefficient of Permeability of Soil uses Discharge from Dam, Equipotential Lines, Number of Beds, Loss of Head & Length of Dam. We can use 2 other way(s) to calculate the same, which is/are as follows -

Coefficient of Permeability of Soil = Discharge from Dam/(Hydraulic Gradient to Head Loss*Cross-Sectional Area of Base*Time Taken to Travel)
Coefficient of Permeability of Soil = sqrt(Intrinsic Permeability*Relative Permeability)

Home

FREE PDFs

🔍 Search