Coefficient of Permeability when Specific or Intrinsic Permeability is Considered Calculator

✖The Intrinsic Permeability or specific permeability is referred as measure of relative ease with which porous medium can transmit fluid under potential gradient and is property of medium alone.ⓘ Intrinsic Permeability [K_o]			+10% -10%
✖The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid.ⓘ Unit Weight of Fluid [γ]			+10% -10%
✖The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity of the Fluid [μ]			+10% -10%

✖The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.ⓘ Coefficient of Permeability when Specific or Intrinsic Permeability is Considered [K]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Coefficient of Permeability Formulas PDF PDF Image

Coefficient of Permeability when Specific or Intrinsic Permeability is Considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Permeability at 20° C = Intrinsic Permeability*((Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid)
K = K_o*((γ/1000)/μ)
This formula uses 4 Variables

Variables Used

Coefficient of Permeability at 20° C - (Measured in Meter per Second) - The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.
Intrinsic Permeability - (Measured in Square Meter) - The Intrinsic Permeability or specific permeability is referred as measure of relative ease with which porous medium can transmit fluid under potential gradient and is property of medium alone.
Unit Weight of Fluid - (Measured in Newton per Cubic Meter) - The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid.
Dynamic Viscosity of the Fluid - (Measured in Pascal Second) - The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied.

STEP 1: Convert Input(s) to Base Unit

Intrinsic Permeability: 0.00987 Square Meter --> 0.00987 Square Meter No Conversion Required
Unit Weight of Fluid: 9.807 Kilonewton per Cubic Meter --> 9807 Newton per Cubic Meter (Check conversion here)
Dynamic Viscosity of the Fluid: 1.6 Pascal Second --> 1.6 Pascal Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K = K_o*((γ/1000)/μ) --> 0.00987*((9807/1000)/1.6)

Evaluating ... ...

K = 0.06049693125

STEP 3: Convert Result to Output's Unit

0.06049693125 Meter per Second -->6.049693125 Centimeter per Second (Check conversion here)

FINAL ANSWER

6.049693125 ≈ 6.049693 Centimeter per Second <-- Coefficient of Permeability at 20° C

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Coefficient of Permeability » Coefficient of Permeability when Specific or Intrinsic Permeability is Considered

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Coefficient of Permeability Calculators

Hagen Poiseuille Flow or Mean Particle Size of Porous Medium Laminar Flow through Conduit

LaTeX Go Mean Particle Size of the Porous Medium = sqrt((Coefficient of Permeability (Hagen-Poiseuille)*Dynamic Viscosity of the Fluid)/(Shape Factor*(Unit Weight of Fluid/1000)))

Dynamic Viscosity of Fluid of Laminar Flow through Conduit or Hagen Poiseuille Flow

LaTeX Go Dynamic Viscosity of the Fluid = (Shape Factor*Mean Particle Size of the Porous Medium^2)*((Unit Weight of Fluid/1000)/Coefficient of Permeability (Hagen-Poiseuille))

Coefficient of Permeability from Analogy of Laminar Flow (Hagen Poiseuille flow)

LaTeX Go Coefficient of Permeability (Hagen-Poiseuille) = Shape Factor*(Mean Particle Size of the Porous Medium^2)*(Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid

Unit weight of fluid

LaTeX Go Unit Weight of Fluid = Density of Fluid*Acceleration due to Gravity

Coefficient of Permeability when Specific or Intrinsic Permeability is Considered Formula

LaTeX Go

Coefficient of Permeability at 20° C = Intrinsic Permeability*((Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid)
K = K_o*((γ/1000)/μ)

What is Kinematic Viscosity?

Kinematic viscosity is a measure of a fluid's internal resistance to flow under gravitational forces. It is determined by measuring the time in seconds, required for a fixed volume of fluid to flow a known distance by gravity through a capillary within a calibrated viscometer at a closely controlled temperature.

How to Calculate Coefficient of Permeability when Specific or Intrinsic Permeability is Considered?

Coefficient of Permeability when Specific or Intrinsic Permeability is Considered calculator uses Coefficient of Permeability at 20° C = Intrinsic Permeability*((Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid) to calculate the Coefficient of Permeability at 20° C, The Coefficient of Permeability when Specific or Intrinsic Permeability is Considered formula is defined as how easily a liquid will move through the soil. It is also commonly referred to as the hydraulic conductivity of the soil. Coefficient of Permeability at 20° C is denoted by K symbol.

How to calculate Coefficient of Permeability when Specific or Intrinsic Permeability is Considered using this online calculator? To use this online calculator for Coefficient of Permeability when Specific or Intrinsic Permeability is Considered, enter Intrinsic Permeability (K_o), Unit Weight of Fluid (γ) & Dynamic Viscosity of the Fluid (μ) and hit the calculate button. Here is how the Coefficient of Permeability when Specific or Intrinsic Permeability is Considered calculation can be explained with given input values -> 604.9693 = 0.00987*((9807/1000)/1.6).

FAQ

What is Coefficient of Permeability when Specific or Intrinsic Permeability is Considered?

The Coefficient of Permeability when Specific or Intrinsic Permeability is Considered formula is defined as how easily a liquid will move through the soil. It is also commonly referred to as the hydraulic conductivity of the soil and is represented as K = K_o*((γ/1000)/μ) or Coefficient of Permeability at 20° C = Intrinsic Permeability*((Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid). The Intrinsic Permeability or specific permeability is referred as measure of relative ease with which porous medium can transmit fluid under potential gradient and is property of medium alone, The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid & The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied.

How to calculate Coefficient of Permeability when Specific or Intrinsic Permeability is Considered?

The Coefficient of Permeability when Specific or Intrinsic Permeability is Considered formula is defined as how easily a liquid will move through the soil. It is also commonly referred to as the hydraulic conductivity of the soil is calculated using Coefficient of Permeability at 20° C = Intrinsic Permeability*((Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid). To calculate Coefficient of Permeability when Specific or Intrinsic Permeability is Considered, you need Intrinsic Permeability (K_o), Unit Weight of Fluid (γ) & Dynamic Viscosity of the Fluid (μ). With our tool, you need to enter the respective value for Intrinsic Permeability, Unit Weight of Fluid & Dynamic Viscosity of the Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Coefficient of Permeability at 20° C?

In this formula, Coefficient of Permeability at 20° C uses Intrinsic Permeability, Unit Weight of Fluid & Dynamic Viscosity of the Fluid. We can use 1 other way(s) to calculate the same, which is/are as follows -

Coefficient of Permeability at 20° C = (Discharge/Cross-Sectional Area)*(1/(Constant Head Difference/Length))

Home

FREE PDFs

🔍 Search