Coefficient of Permeability given Radius of Influence Calculator

✖Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.ⓘ Radius of Influence [R_w]			+10% -10%
✖The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown [s_t]			+10% -10%

✖Coefficient of Permeability of Soil Particle describes how easily a liquid will move through the soil.ⓘ Coefficient of Permeability given Radius of Influence [K_soil]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconfined Aquifer Formulas PDF PDF Image

Coefficient of Permeability given Radius of Influence Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown))^2
K_soil = (R_w/(3000*s_t))^2
This formula uses 3 Variables

Variables Used

Coefficient of Permeability of Soil Particle - (Measured in Meter per Second) - Coefficient of Permeability of Soil Particle describes how easily a liquid will move through the soil.
Radius of Influence - (Measured in Meter) - Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.
Total Drawdown - (Measured in Meter) - The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

STEP 1: Convert Input(s) to Base Unit

Radius of Influence: 8.6 Meter --> 8.6 Meter No Conversion Required
Total Drawdown: 0.83 Meter --> 0.83 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_soil = (R_w/(3000*s_t))^2 --> (8.6/(3000*0.83))^2

Evaluating ... ...

K_soil = 1.19288398574217E-05

STEP 3: Convert Result to Output's Unit

1.19288398574217E-05 Meter per Second -->0.00119288398574217 Centimeter per Second (Check conversion here)

FINAL ANSWER

0.00119288398574217 ≈ 0.001193 Centimeter per Second <-- Coefficient of Permeability of Soil Particle

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Unconfined Aquifer » Coefficient of Permeability » Coefficient of Permeability given Radius of Influence

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Coefficient of Permeability Calculators

Coefficient of Permeability given Discharge in Unconfined Aquifer

LaTeX Go Coefficient of Permeability in Well Hydraulics = Discharge/((pi*(Thickness of Unconfined Aquifer^2-Depth of Water^2))/(log((Radius of Influence/Radius of Well),e)))

Coefficient of Permeability given Discharge in Unconfined Aquifer with Base 10

LaTeX Go Coefficient of Permeability in Well Hydraulics = Discharge/((1.36*(Aquifer Thickness^2-Depth of Water in Well^2))/(log((Radius of Influence/Radius of Well),10)))

Coefficient of Permeability given Rate of Flow

LaTeX Go Coefficient of Permeability given Rate of Flow = (Discharge/(Hydraulic Gradient in Envi. Engi.*Area of Cross Section in Enviro. Engin.))

Coefficient of Permeability given Flow Velocity

LaTeX Go Coefficient of Permeability given Flow Velocity = (Flow Velocity/Hydraulic Gradient in Envi. Engi.)

Coefficient of Permeability given Radius of Influence Formula

LaTeX Go

Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown))^2
K_soil = (R_w/(3000*s_t))^2

What is Coefficient of Permeability?

The “Radius of Influence” is defined as the maximum distance at which the drawdowns can be detected with the usual measure devices in the field.

How to Calculate Coefficient of Permeability given Radius of Influence?

Coefficient of Permeability given Radius of Influence calculator uses Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown))^2 to calculate the Coefficient of Permeability of Soil Particle, The Coefficient of Permeability given Radius of Influence is defined as the value of coefficient of permeability when we have prior information of other parameters used. Coefficient of Permeability of Soil Particle is denoted by K_soil symbol.

How to calculate Coefficient of Permeability given Radius of Influence using this online calculator? To use this online calculator for Coefficient of Permeability given Radius of Influence, enter Radius of Influence (R_w) & Total Drawdown (s_t) and hit the calculate button. Here is how the Coefficient of Permeability given Radius of Influence calculation can be explained with given input values -> 0.119288 = (8.6/(3000*0.83))^2.

FAQ

What is Coefficient of Permeability given Radius of Influence?

The Coefficient of Permeability given Radius of Influence is defined as the value of coefficient of permeability when we have prior information of other parameters used and is represented as K_soil = (R_w/(3000*s_t))^2 or Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown))^2. Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table & The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

How to calculate Coefficient of Permeability given Radius of Influence?

The Coefficient of Permeability given Radius of Influence is defined as the value of coefficient of permeability when we have prior information of other parameters used is calculated using Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown))^2. To calculate Coefficient of Permeability given Radius of Influence, you need Radius of Influence (R_w) & Total Drawdown (s_t). With our tool, you need to enter the respective value for Radius of Influence & Total Drawdown and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search