Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir Calculator

✖Heat in the hot reservoir is the energy that is transferred between two systems of different temperatures to get into the higher temperature.ⓘ Heat in the hot reservoir [Q_H]			+10% -10%
✖Mechanical Energy is the net amount of input heat energy converted into useful work for a given thermal system.ⓘ Mechanical Energy [W_net]			+10% -10%

✖COP of Heat Pump in Cold Reservoir given work and heat in the cold reservoir is the ratio of the heat supplied to the system to the work required by the system.ⓘ Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir [COP_HP(CR)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir Solution

STEP 0: Pre-Calculation Summary

Formula Used

COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy
COP_HP(CR) = Q_H/W_net
This formula uses 3 Variables

Variables Used

COP of Heat Pump in Cold Reservoir - COP of Heat Pump in Cold Reservoir given work and heat in the cold reservoir is the ratio of the heat supplied to the system to the work required by the system.
Heat in the hot reservoir - (Measured in Joule) - Heat in the hot reservoir is the energy that is transferred between two systems of different temperatures to get into the higher temperature.
Mechanical Energy - (Measured in Joule) - Mechanical Energy is the net amount of input heat energy converted into useful work for a given thermal system.

STEP 1: Convert Input(s) to Base Unit

Heat in the hot reservoir: 640 Joule --> 640 Joule No Conversion Required
Mechanical Energy: 320 Joule --> 320 Joule No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

COP_HP(CR) = Q_H/W_net --> 640/320

Evaluating ... ...

COP_HP(CR) = 2

STEP 3: Convert Result to Output's Unit

2 --> No Conversion Required

FINAL ANSWER

2 <-- COP of Heat Pump in Cold Reservoir

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Production of Power from Heat » Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir

Credits

Created by Suman Ray Pramanik

Indian Institute of Technology (IIT), Kanpur

Suman Ray Pramanik has created this Calculator and 50+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Production of Power from Heat Calculators

Thermal Expansion

LaTeX Go Coefficient of Linear Thermal Expansion = Change in Length/(Initial Length*Temperature Change)

Thermal Efficiency of Carnot Engine

LaTeX Go Thermal Efficiency of Carnot Engine = 1-Absolute Temperature of Cold Reservoir/Absolute Temperature of Hot Reservoir

Thermal Efficiency of Heat Engine

LaTeX Go Thermal Efficiency of Heat Engine = Work/Heat Energy

Otto Cycle Efficiency

LaTeX Go OTE = 1-Initial Temperature/Final Temperature

< Coefficient of Performance Calculators

Coefficient of Performance of Absorption System

LaTeX Go Coefficient of Performance of absorption system = (Evaporator Temperature*(Generator temperature-Condenser temperature))/(Generator temperature*(Condenser temperature-Evaporator Temperature))

Coefficient of Performance of Heat Pump using Heat in Cold and Hot Reservoir

LaTeX Go COP of Heat Pump given Heat = Heat in the hot reservoir/(Heat in the hot reservoir-Heat in Cold Reservoir)

Coefficient of Performance of Refrigerator

LaTeX Go Coefficient of Performance of Refrigerator = Heat from Low Temperature Reservoir/Refrigerator Work

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir

LaTeX Go COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir Formula

LaTeX Go

COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy
COP_HP(CR) = Q_H/W_net

What is Coefficient of Performance of Heat Pump using Work and Heat in the Cold Reservoir?

Coefficient of Performance of Heat Pump given work and heat in the cold reservoir is the ratio of the heat supplied to the system by the work required by the system. It indicates the units of power the system will provide as output for one unit of power.

How to Calculate Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir?

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir calculator uses COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy to calculate the COP of Heat Pump in Cold Reservoir, Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir is the ratio of the heat supplied to the system by the work required by the system. COP of Heat Pump in Cold Reservoir is denoted by COP_HP(CR) symbol.

How to calculate Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir using this online calculator? To use this online calculator for Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir, enter Heat in the hot reservoir (Q_H) & Mechanical Energy (W_net) and hit the calculate button. Here is how the Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir calculation can be explained with given input values -> 2 = 640/320.

FAQ

What is Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir?

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir is the ratio of the heat supplied to the system by the work required by the system and is represented as COP_HP(CR) = Q_H/W_net or COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy. Heat in the hot reservoir is the energy that is transferred between two systems of different temperatures to get into the higher temperature & Mechanical Energy is the net amount of input heat energy converted into useful work for a given thermal system.

How to calculate Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir?

Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir is the ratio of the heat supplied to the system by the work required by the system is calculated using COP of Heat Pump in Cold Reservoir = Heat in the hot reservoir/Mechanical Energy. To calculate Coefficient of Performance of Heat Pump using Work and Heat in Cold Reservoir, you need Heat in the hot reservoir (Q_H) & Mechanical Energy (W_net). With our tool, you need to enter the respective value for Heat in the hot reservoir & Mechanical Energy and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search