Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory Calculator

✖Collar Friction Torque for Power Screw is the additional torque required to account for the friction between the Collar and Load of the power screw.ⓘ Collar Friction Torque for Power Screw [T_c]			+10% -10%
✖The Outer Diameter of Collar is the actual outer diameter of the collar.ⓘ Outer Diameter of Collar [D_o]			+10% -10%
✖The Inner Diameter of Collar is the actual inner diameter of the collar.ⓘ Inner Diameter of Collar [D_i]			+10% -10%
✖Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.ⓘ Load on screw [W]			+10% -10%

✖The Coefficient of Friction for Collar is the ratio defining the force that resists the motion of one body in relation to another body in contact with it.ⓘ Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory [μ_collar]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power Screws Formulas PDF PDF Image

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Friction for Collar = (3*Collar Friction Torque for Power Screw*((Outer Diameter of Collar^2)-(Inner Diameter of Collar^2)))/(Load on screw*((Outer Diameter of Collar^3)-(Inner Diameter of Collar^3)))
μ_collar = (3*T_c*((D_o^2)-(D_i^2)))/(W*((D_o^3)-(D_i^3)))
This formula uses 5 Variables

Variables Used

Coefficient of Friction for Collar - The Coefficient of Friction for Collar is the ratio defining the force that resists the motion of one body in relation to another body in contact with it.
Collar Friction Torque for Power Screw - (Measured in Newton Meter) - Collar Friction Torque for Power Screw is the additional torque required to account for the friction between the Collar and Load of the power screw.
Outer Diameter of Collar - (Measured in Meter) - The Outer Diameter of Collar is the actual outer diameter of the collar.
Inner Diameter of Collar - (Measured in Meter) - The Inner Diameter of Collar is the actual inner diameter of the collar.
Load on screw - (Measured in Newton) - Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.

STEP 1: Convert Input(s) to Base Unit

Collar Friction Torque for Power Screw: 10000 Newton Millimeter --> 10 Newton Meter (Check conversion here)
Outer Diameter of Collar: 100 Millimeter --> 0.1 Meter (Check conversion here)
Inner Diameter of Collar: 60 Millimeter --> 0.06 Meter (Check conversion here)
Load on screw: 1700 Newton --> 1700 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ_collar = (3*T_c*((D_o^2)-(D_i^2)))/(W*((D_o^3)-(D_i^3))) --> (3*10*((0.1^2)-(0.06^2)))/(1700*((0.1^3)-(0.06^3)))

Evaluating ... ...

μ_collar = 0.14405762304922

STEP 3: Convert Result to Output's Unit

0.14405762304922 --> No Conversion Required

FINAL ANSWER

0.14405762304922 ≈ 0.144058 <-- Coefficient of Friction for Collar

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Power Screws » Collar Friction » Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Collar Friction Calculators

Collar Friction Torque for Screw according to Uniform Pressure Theory

LaTeX Go Collar Friction Torque for Power Screw = (Coefficient of Friction for Collar*Load on screw*(Outer Radius of Power Screw Collar^3-Inner Radius of Power Screw Collar^3))/((3/2)*(Outer Radius of Power Screw Collar^2-Inner Radius of Power Screw Collar^2))

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory

LaTeX Go Coefficient of Friction for Collar = (3*Collar Friction Torque for Power Screw*((Outer Diameter of Collar^2)-(Inner Diameter of Collar^2)))/(Load on screw*((Outer Diameter of Collar^3)-(Inner Diameter of Collar^3)))

Load on Screw given Collar Friction Torque according to Uniform Pressure Theory

LaTeX Go Load on screw = (3*Collar Friction Torque for Power Screw*(Outer Diameter of Collar^2-Inner Diameter of Collar^2))/(Coefficient of Friction for Collar*(Outer Diameter of Collar^3-Inner Diameter of Collar^3))

Load on Screw given Collar Friction Torque according to Uniform Wear Theory

LaTeX Go Load on screw = (4*Collar Friction Torque for Power Screw)/(Coefficient of Friction for Collar*(Outer Diameter of Collar+Inner Diameter of Collar))

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory Formula

LaTeX Go

what is cofficient of friction?

The coefficient of friction, µ, is a measure of the amount of friction existing between two surfaces. A low value of coefficient of friction indicates that the force required for sliding to occur is less than the force required when the coefficient of friction is high.

How to Calculate Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory?

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory calculator uses Coefficient of Friction for Collar = (3*Collar Friction Torque for Power Screw*((Outer Diameter of Collar^2)-(Inner Diameter of Collar^2)))/(Load on screw*((Outer Diameter of Collar^3)-(Inner Diameter of Collar^3))) to calculate the Coefficient of Friction for Collar, Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory is the ratio defining the force that resists the motion of one body in relation to another body in contact with it. Coefficient of Friction for Collar is denoted by μ_collar symbol.

How to calculate Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory using this online calculator? To use this online calculator for Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory, enter Collar Friction Torque for Power Screw (T_c), Outer Diameter of Collar (D_o), Inner Diameter of Collar (D_i) & Load on screw (W) and hit the calculate button. Here is how the Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory calculation can be explained with given input values -> 0.144058 = (3*10*((0.1^2)-(0.06^2)))/(1700*((0.1^3)-(0.06^3))).

FAQ

What is Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory?

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory is the ratio defining the force that resists the motion of one body in relation to another body in contact with it and is represented as μ_collar = (3*T_c*((D_o^2)-(D_i^2)))/(W*((D_o^3)-(D_i^3))) or Coefficient of Friction for Collar = (3*Collar Friction Torque for Power Screw*((Outer Diameter of Collar^2)-(Inner Diameter of Collar^2)))/(Load on screw*((Outer Diameter of Collar^3)-(Inner Diameter of Collar^3))). Collar Friction Torque for Power Screw is the additional torque required to account for the friction between the Collar and Load of the power screw, The Outer Diameter of Collar is the actual outer diameter of the collar, The Inner Diameter of Collar is the actual inner diameter of the collar & Load on screw is defined as the weight (force) of the body that is acted upon the screw threads.

How to calculate Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory?

Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory is the ratio defining the force that resists the motion of one body in relation to another body in contact with it is calculated using Coefficient of Friction for Collar = (3*Collar Friction Torque for Power Screw*((Outer Diameter of Collar^2)-(Inner Diameter of Collar^2)))/(Load on screw*((Outer Diameter of Collar^3)-(Inner Diameter of Collar^3))). To calculate Coefficient of Friction at Collar of Screw according to Uniform Pressure Theory, you need Collar Friction Torque for Power Screw (T_c), Outer Diameter of Collar (D_o), Inner Diameter of Collar (D_i) & Load on screw (W). With our tool, you need to enter the respective value for Collar Friction Torque for Power Screw, Outer Diameter of Collar, Inner Diameter of Collar & Load on screw and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Coefficient of Friction for Collar?

In this formula, Coefficient of Friction for Collar uses Collar Friction Torque for Power Screw, Outer Diameter of Collar, Inner Diameter of Collar & Load on screw. We can use 1 other way(s) to calculate the same, which is/are as follows -

Coefficient of Friction for Collar = (4*Collar Friction Torque for Power Screw)/(Load on screw*((Outer Diameter of Collar)+(Inner Diameter of Collar)))

Home

FREE PDFs

🔍 Search