Coefficient of Drag at 10m Reference Level given Wind Stress Calculator

✖Wind Stress is the shear stress exerted by the wind on the surface of large bodies of water.ⓘ Wind Stress [τ_o]			+10% -10%
✖Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.ⓘ Wind Speed [U]			+10% -10%

✖Coefficient of Drag to 10m Reference Level is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.ⓘ Coefficient of Drag at 10m Reference Level given Wind Stress [C_DZ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Meteorology and Wave Climate Formulas PDF PDF Image

Coefficient of Drag at 10m Reference Level given Wind Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Drag to 10m Reference Level = Wind Stress/Wind Speed^2
C_DZ = τ_o/U^2
This formula uses 3 Variables

Variables Used

Coefficient of Drag to 10m Reference Level - Coefficient of Drag to 10m Reference Level is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.
Wind Stress - (Measured in Pascal) - Wind Stress is the shear stress exerted by the wind on the surface of large bodies of water.
Wind Speed - (Measured in Meter per Second) - Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.

STEP 1: Convert Input(s) to Base Unit

Wind Stress: 1.5 Pascal --> 1.5 Pascal No Conversion Required
Wind Speed: 4 Meter per Second --> 4 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_DZ = τ_o/U^2 --> 1.5/4^2

Evaluating ... ...

C_DZ = 0.09375

STEP 3: Convert Result to Output's Unit

0.09375 --> No Conversion Required

FINAL ANSWER

0.09375 <-- Coefficient of Drag to 10m Reference Level

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Meteorology and Wave Climate » Estimating Marine and Coastal Winds » Coefficient of Drag at 10m Reference Level given Wind Stress

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Estimating Marine and Coastal Winds Calculators

Wind Speed at Height z above Surface

LaTeX Go Wind Speed = (Friction Velocity/Von Kármán Constant)*ln(Height z above Surface/Roughness Height of Surface)

Wind Speed at Height z above Surface given Standard Reference Wind Speed

LaTeX Go Wind Speed = Wind Speed at Height of 10 m/(10/Height z above Surface)^(1/7)

Wind Speed at Standard 10-m Reference Level

LaTeX Go Wind Speed at Height of 10 m = Wind Speed*(10/Height z above Surface)^(1/7)

Height z above Surface given Standard Reference Wind Speed

LaTeX Go Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7

Coefficient of Drag at 10m Reference Level given Wind Stress Formula

LaTeX Go

Coefficient of Drag to 10m Reference Level = Wind Stress/Wind Speed^2
C_DZ = τ_o/U^2

What is Geostrophic Wind?

The Geostrophic wind is a theoretical wind speed that results from a balance between the Coriolis force and the pressure-gradient force, concepts explored in greater detail in later readings.

What is 10m Wind?

Surface wind is the wind blowing near the Earth's surface. The wind 10m chart displays the modelled average wind vector 10 m above the ground for every grid point of the model (ca. every 80 km). Generally, the actually observed wind velocity at 10 m above ground is a little bit lower than the modelled one.

How to Calculate Coefficient of Drag at 10m Reference Level given Wind Stress?

Coefficient of Drag at 10m Reference Level given Wind Stress calculator uses Coefficient of Drag to 10m Reference Level = Wind Stress/Wind Speed^2 to calculate the Coefficient of Drag to 10m Reference Level, The Coefficient of Drag at 10m Reference Level given Wind Stress formula is defined as a dimensionless quantity used to quantify an object's drag or resistance in a fluid environment, such as air or water. Coefficient of Drag to 10m Reference Level is denoted by C_DZ symbol.

How to calculate Coefficient of Drag at 10m Reference Level given Wind Stress using this online calculator? To use this online calculator for Coefficient of Drag at 10m Reference Level given Wind Stress, enter Wind Stress (τ_o) & Wind Speed (U) and hit the calculate button. Here is how the Coefficient of Drag at 10m Reference Level given Wind Stress calculation can be explained with given input values -> 0.09375 = 1.5/4^2.

FAQ

What is Coefficient of Drag at 10m Reference Level given Wind Stress?

The Coefficient of Drag at 10m Reference Level given Wind Stress formula is defined as a dimensionless quantity used to quantify an object's drag or resistance in a fluid environment, such as air or water and is represented as C_DZ = τ_o/U^2 or Coefficient of Drag to 10m Reference Level = Wind Stress/Wind Speed^2. Wind Stress is the shear stress exerted by the wind on the surface of large bodies of water & Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.

How to calculate Coefficient of Drag at 10m Reference Level given Wind Stress?

The Coefficient of Drag at 10m Reference Level given Wind Stress formula is defined as a dimensionless quantity used to quantify an object's drag or resistance in a fluid environment, such as air or water is calculated using Coefficient of Drag to 10m Reference Level = Wind Stress/Wind Speed^2. To calculate Coefficient of Drag at 10m Reference Level given Wind Stress, you need Wind Stress (τ_o) & Wind Speed (U). With our tool, you need to enter the respective value for Wind Stress & Wind Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search