Coefficient Dependent on Pipe given Head Loss Calculator

✖Length of Pipe describes the length of the pipe in which the liquid is flowing.ⓘ Length of Pipe [L_p]			+10% -10%
✖Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe.ⓘ Average Velocity in Pipe Fluid Flow [v_avg]			+10% -10%
✖Diameter of Pipe is the diameter of the pipe in which the liquid is flowing.ⓘ Diameter of Pipe [D_p]			+10% -10%
✖Head Loss in Pipe is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a pipe.ⓘ Head Loss in Pipe [H_L']			+10% -10%

✖Coefficient of Roughness of Pipe is a dimensionless parameter used in environmental engineering, particularly in fluid mechanics and hydraulics.ⓘ Coefficient Dependent on Pipe given Head Loss [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hazen Williams Formula Formulas PDF PDF Image

Coefficient Dependent on Pipe given Head Loss Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Roughness of Pipe = ((6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Head Loss in Pipe))^(1/1.85)
C = ((6.78*L_p*v_avg^(1.85))/((D_p^(1.165))*H_L'))^(1/1.85)
This formula uses 5 Variables

Variables Used

Coefficient of Roughness of Pipe - Coefficient of Roughness of Pipe is a dimensionless parameter used in environmental engineering, particularly in fluid mechanics and hydraulics.
Length of Pipe - (Measured in Meter) - Length of Pipe describes the length of the pipe in which the liquid is flowing.
Average Velocity in Pipe Fluid Flow - (Measured in Meter per Second) - Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe.
Diameter of Pipe - (Measured in Meter) - Diameter of Pipe is the diameter of the pipe in which the liquid is flowing.
Head Loss in Pipe - (Measured in Meter) - Head Loss in Pipe is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a pipe.

STEP 1: Convert Input(s) to Base Unit

Length of Pipe: 2.5 Meter --> 2.5 Meter No Conversion Required
Average Velocity in Pipe Fluid Flow: 4.57 Meter per Second --> 4.57 Meter per Second No Conversion Required
Diameter of Pipe: 0.4 Meter --> 0.4 Meter No Conversion Required
Head Loss in Pipe: 1.4 Meter --> 1.4 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = ((6.78*L_p*v_avg^(1.85))/((D_p^(1.165))*H_L'))^(1/1.85) --> ((6.78*2.5*4.57^(1.85))/((0.4^(1.165))*1.4))^(1/1.85)

Evaluating ... ...

C = 31.3284409010289

STEP 3: Convert Result to Output's Unit

31.3284409010289 --> No Conversion Required

FINAL ANSWER

31.3284409010289 ≈ 31.32844 <-- Coefficient of Roughness of Pipe

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Distribution of Water » Pipe Hydraulics » Hazen Williams Formula » Coefficient Dependent on Pipe given Head Loss

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Hazen Williams Formula Calculators

Head Loss by Hazen Williams Formula

LaTeX Go Head Loss in Pipe = (6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Coefficient of Roughness of Pipe^(1.85))

Velocity of Flow given Head Loss by Hazen Williams Formula

LaTeX Go Average Velocity in Pipe Fluid Flow = (Head Loss/((6.78*Length of Pipe)/((Diameter of Pipe^(1.165))*Coefficient of Roughness of Pipe^(1.85))))^(1/1.85)

Length of Pipe given Head Loss by Hazen Williams Formula

LaTeX Go Length of Pipe = Head Loss/((6.78*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Coefficient of Roughness of Pipe^(1.85)))

Mean Velocity of Flow in Pipe by Hazen Williams Formula

LaTeX Go Average Velocity in Pipe Fluid Flow = 0.85*Coefficient of Roughness of Pipe*((Pipe Radius)^(0.63))*(Hydraulic Gradient)^(0.54)

Coefficient Dependent on Pipe given Head Loss Formula

LaTeX Go

What is Roughness Coefficient?

Roughness coefficient is based on the material of the pipe. For PVC pipe, the standard C value is 150. New steel pipe uses a C value of 140, but with use and corrosion a lower value is typically used.

How to Calculate Coefficient Dependent on Pipe given Head Loss?

Coefficient Dependent on Pipe given Head Loss calculator uses Coefficient of Roughness of Pipe = ((6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Head Loss in Pipe))^(1/1.85) to calculate the Coefficient of Roughness of Pipe, The Coefficient Dependent on Pipe given Head Loss is defined as the value of roughness coefficient dependent on pipe when we have prior information of head loss. Coefficient of Roughness of Pipe is denoted by C symbol.

How to calculate Coefficient Dependent on Pipe given Head Loss using this online calculator? To use this online calculator for Coefficient Dependent on Pipe given Head Loss, enter Length of Pipe (L_p), Average Velocity in Pipe Fluid Flow (v_avg), Diameter of Pipe (D_p) & Head Loss in Pipe (H_L') and hit the calculate button. Here is how the Coefficient Dependent on Pipe given Head Loss calculation can be explained with given input values -> 31.32844 = ((6.78*2.5*4.57^(1.85))/((0.4^(1.165))*1.4))^(1/1.85).

FAQ

What is Coefficient Dependent on Pipe given Head Loss?

The Coefficient Dependent on Pipe given Head Loss is defined as the value of roughness coefficient dependent on pipe when we have prior information of head loss and is represented as C = ((6.78*L_p*v_avg^(1.85))/((D_p^(1.165))*H_L'))^(1/1.85) or Coefficient of Roughness of Pipe = ((6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Head Loss in Pipe))^(1/1.85). Length of Pipe describes the length of the pipe in which the liquid is flowing, Average Velocity in Pipe Fluid Flow is the total volumetric flow rate divided by the cross-sectional area of the pipe, Diameter of Pipe is the diameter of the pipe in which the liquid is flowing & Head Loss in Pipe is a measure of the reduction in the total head (sum of elevation head, velocity head and pressure head) of the fluid as it moves through a pipe.

How to calculate Coefficient Dependent on Pipe given Head Loss?

The Coefficient Dependent on Pipe given Head Loss is defined as the value of roughness coefficient dependent on pipe when we have prior information of head loss is calculated using Coefficient of Roughness of Pipe = ((6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/((Diameter of Pipe^(1.165))*Head Loss in Pipe))^(1/1.85). To calculate Coefficient Dependent on Pipe given Head Loss, you need Length of Pipe (L_p), Average Velocity in Pipe Fluid Flow (v_avg), Diameter of Pipe (D_p) & Head Loss in Pipe (H_L'). With our tool, you need to enter the respective value for Length of Pipe, Average Velocity in Pipe Fluid Flow, Diameter of Pipe & Head Loss in Pipe and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Coefficient of Roughness of Pipe?

In this formula, Coefficient of Roughness of Pipe uses Length of Pipe, Average Velocity in Pipe Fluid Flow, Diameter of Pipe & Head Loss in Pipe. We can use 3 other way(s) to calculate the same, which is/are as follows -

Coefficient of Roughness of Pipe = Average Velocity in Pipe Fluid Flow/(0.85*((Pipe Radius)^(0.63))*(Hydraulic Gradient)^(0.54))
Coefficient of Roughness of Pipe = Average Velocity in Pipe Fluid Flow/(0.355*((Pipe Diameter)^(0.63))*(Hydraulic Gradient)^(0.54))
Coefficient of Roughness of Pipe = ((6.78*Length of Pipe*Average Velocity in Pipe Fluid Flow^(1.85))/(((2*Pipe Radius)^(1.165))*Head Loss in Pipe))^(1/1.85)

Home

FREE PDFs

🔍 Search