Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure Calculator

✖Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Force [F]			+10% -10%
✖Length of wire is the measurement or extent of wirer from end to end.ⓘ Length of wire [L]			+10% -10%
✖Diameter of Wire is the diameter of the wire in thread measurements.ⓘ Diameter of Wire [G_wire]			+10% -10%
✖Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.ⓘ Stress in wire due to fluid pressure [σ_wf]			+10% -10%
✖Thickness Of Wire is the distance through a wire.ⓘ Thickness Of Wire [t]			+10% -10%

✖Circumferential stress due to fluid pressure is a kind of tensile stress exerted on cylinder due to fluid pressure.ⓘ Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure [σ_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire)
σ_c = ((F/L)-((pi/2)*G_wire*σ_wf))/(2*t)
This formula uses 1 Constants, 6 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Circumferential stress due to fluid pressure - (Measured in Pascal) - Circumferential stress due to fluid pressure is a kind of tensile stress exerted on cylinder due to fluid pressure.
Force - (Measured in Newton) - Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Length of wire - (Measured in Meter) - Length of wire is the measurement or extent of wirer from end to end.
Diameter of Wire - (Measured in Meter) - Diameter of Wire is the diameter of the wire in thread measurements.
Stress in wire due to fluid pressure - (Measured in Pascal) - Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.
Thickness Of Wire - (Measured in Meter) - Thickness Of Wire is the distance through a wire.

STEP 1: Convert Input(s) to Base Unit

Force: 1.2 Kilonewton --> 1200 Newton (Check conversion here)
Length of wire: 3500 Millimeter --> 3.5 Meter (Check conversion here)
Diameter of Wire: 3.6 Millimeter --> 0.0036 Meter (Check conversion here)
Stress in wire due to fluid pressure: 8 Megapascal --> 8000000 Pascal (Check conversion here)
Thickness Of Wire: 1200 Millimeter --> 1.2 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_c = ((F/L)-((pi/2)*G_wire*σ_wf))/(2*t) --> ((1200/3.5)-((pi/2)*0.0036*8000000))/(2*1.2)

Evaluating ... ...

σ_c = -18706.6987786816

STEP 3: Convert Result to Output's Unit

-18706.6987786816 Pascal -->-0.0187066987786816 Megapascal (Check conversion here)

FINAL ANSWER

-0.0187066987786816 ≈ -0.018707 Megapascal <-- Circumferential stress due to fluid pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Thin Cylinders And Spheres » Wire Winding of Thin Cylinders » Mechanical » Stress » Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Stress Calculators

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure

LaTeX Go Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire)

Circumferential stress in cylinder given circumferential strain in cylinder

LaTeX Go Circumferential stress due to fluid pressure = (Circumferential strain*Young's Modulus Cylinder)+(Poisson's Ratio*Longitudinal Stress)

Circumferential stress due to fluid pressure given resisting force of cylinder

LaTeX Go Circumferential stress due to fluid pressure = Force/(2*Length of wire*Thickness Of Wire)

Circumferential stress due to fluid pressure given resultant stress in cylinder

LaTeX Go Circumferential stress due to fluid pressure = Resultant Stress+Compressive Circumferential Stress

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure Formula

LaTeX Go

Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire)
σ_c = ((F/L)-((pi/2)*G_wire*σ_wf))/(2*t)

Is a higher Young's modulus better?

The coefficient of proportionality is Young's modulus. The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material such as fluid would deform without force and would have zero Young's Modulus.

How to Calculate Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure?

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure calculator uses Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire) to calculate the Circumferential stress due to fluid pressure, The Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named strain. Stress can deform the body. Circumferential stress due to fluid pressure is denoted by σ_c symbol.

How to calculate Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure using this online calculator? To use this online calculator for Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure, enter Force (F), Length of wire (L), Diameter of Wire (G_wire), Stress in wire due to fluid pressure (σ_wf) & Thickness Of Wire (t) and hit the calculate button. Here is how the Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure calculation can be explained with given input values -> -1.9E-8 = ((1200/3.5)-((pi/2)*0.0036*8000000))/(2*1.2).

FAQ

What is Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure?

The Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named strain. Stress can deform the body and is represented as σ_c = ((F/L)-((pi/2)*G_wire*σ_wf))/(2*t) or Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire). Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity, Length of wire is the measurement or extent of wirer from end to end, Diameter of Wire is the diameter of the wire in thread measurements, Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure & Thickness Of Wire is the distance through a wire.

How to calculate Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure?

The Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure formula is defined as the force acting on the unit area of a material. The effect of stress on a body is named strain. Stress can deform the body is calculated using Circumferential stress due to fluid pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire). To calculate Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure, you need Force (F), Length of wire (L), Diameter of Wire (G_wire), Stress in wire due to fluid pressure (σ_wf) & Thickness Of Wire (t). With our tool, you need to enter the respective value for Force, Length of wire, Diameter of Wire, Stress in wire due to fluid pressure & Thickness Of Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Circumferential stress due to fluid pressure?

In this formula, Circumferential stress due to fluid pressure uses Force, Length of wire, Diameter of Wire, Stress in wire due to fluid pressure & Thickness Of Wire. We can use 3 other way(s) to calculate the same, which is/are as follows -

Circumferential stress due to fluid pressure = Force/(2*Length of wire*Thickness Of Wire)
Circumferential stress due to fluid pressure = Resultant Stress+Compressive Circumferential Stress
Circumferential stress due to fluid pressure = (Circumferential strain*Young's Modulus Cylinder)+(Poisson's Ratio*Longitudinal Stress)

Home

FREE PDFs

🔍 Search