Characteristic Length for Lumped System Calculator

✖Volume is the amount of space that a substance or object occupies or that is enclosed within a container.ⓘ Volume [V_T]			+10% -10%
✖The area is the amount of two-dimensional space taken up by an object.ⓘ Area [A]			+10% -10%

✖Characteristic Length is the ratio of volume and the area.ⓘ Characteristic Length for Lumped System [L_char]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Thermodynamics Formula PDF PDF Image

Characteristic Length for Lumped System Solution

STEP 0: Pre-Calculation Summary

Formula Used

Characteristic Length = (Volume)/(Area)
L_char = (V_T)/(A)
This formula uses 3 Variables

Variables Used

Characteristic Length - (Measured in Meter) - Characteristic Length is the ratio of volume and the area.
Volume - (Measured in Cubic Meter) - Volume is the amount of space that a substance or object occupies or that is enclosed within a container.
Area - (Measured in Square Meter) - The area is the amount of two-dimensional space taken up by an object.

STEP 1: Convert Input(s) to Base Unit

Volume: 0.63 Cubic Meter --> 0.63 Cubic Meter No Conversion Required
Area: 50 Square Meter --> 50 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_char = (V_T)/(A) --> (0.63)/(50)

Evaluating ... ...

L_char = 0.0126

STEP 3: Convert Result to Output's Unit

0.0126 Meter --> No Conversion Required

FINAL ANSWER

0.0126 Meter <-- Characteristic Length

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Thermodynamics » Heat Transfer » Heat Transfer and Psychrometry » Characteristic Length for Lumped System

Credits

Created by Akshay Talbar

Vishwakarma University (VU), Pune

Akshay Talbar has created this Calculator and 25+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Heat Transfer and Psychrometry Calculators

Absolute Humidity of Air at Initial Air Temperature

LaTeX Go Absolute Humidity of Air(tg) = (((Liquid Phase Heat Transfer Coefficient*(Inside Temperature-Liquid layer temperature))-Gas Phase Heat Transfer Coefficient*(Bulk Gas Temperature-Inside Temperature))/(Gas Phase Mass Transfer Coefficient*Enthalpy of Evaporation))+Absolute Humidity (ti)

Heat Flux

LaTeX Go Heat Flux = Thermal Conductivity of Fin*Temperature of Conductor/Length of Conductor

Diameter of Rod Circular Fin given Area of Cross-Section

LaTeX Go Diameter of Circular Rod = sqrt((Cross-sectional area*4)/pi)

Characteristic Length for Lumped System

LaTeX Go Characteristic Length = (Volume)/(Area)

Characteristic Length for Lumped System Formula

LaTeX Go

Characteristic Length = (Volume)/(Area)
L_char = (V_T)/(A)

Why characteristic length used ?

Characteristic length is used to calculate the Biot number. Which verifies the state of the system is it lumped or not?

How to Calculate Characteristic Length for Lumped System?

Characteristic Length for Lumped System calculator uses Characteristic Length = (Volume)/(Area) to calculate the Characteristic Length, Characteristic length for lumped system is the ratio of volume and surface area of the given geometry. Characteristic Length is denoted by L_char symbol.

How to calculate Characteristic Length for Lumped System using this online calculator? To use this online calculator for Characteristic Length for Lumped System, enter Volume (V_T) & Area (A) and hit the calculate button. Here is how the Characteristic Length for Lumped System calculation can be explained with given input values -> 0.0126 = (0.63)/(50).

FAQ

What is Characteristic Length for Lumped System?

Characteristic length for lumped system is the ratio of volume and surface area of the given geometry and is represented as L_char = (V_T)/(A) or Characteristic Length = (Volume)/(Area). Volume is the amount of space that a substance or object occupies or that is enclosed within a container & The area is the amount of two-dimensional space taken up by an object.

How to calculate Characteristic Length for Lumped System?

Characteristic length for lumped system is the ratio of volume and surface area of the given geometry is calculated using Characteristic Length = (Volume)/(Area). To calculate Characteristic Length for Lumped System, you need Volume (V_T) & Area (A). With our tool, you need to enter the respective value for Volume & Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search