Channel Depth in Non-propagated Wave Values Calculator

✖Non-propagated Wave Values is elements of a wave function that don't transmit energy or information, often called standing waves.ⓘ Non-propagated Wave Values [Ω]			+10% -10%
✖Wave Period refers to the time it takes for two successive wave crests (or troughs) to pass through a given point.ⓘ Wave Period [T_p]			+10% -10%

✖Time Averaged Water Depth is the depth of water during average time.ⓘ Channel Depth in Non-propagated Wave Values [d_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bay Superelevation, Effect of Freshwater Inflow, Multiple Inlets and Wave Current Interaction Formulas PDF PDF Image

Channel Depth in Non-propagated Wave Values Solution

STEP 0: Pre-Calculation Summary

Formula Used

Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5)
d_T = [g]*((Ω*T_p)/(2*pi))^(1/0.5)
This formula uses 2 Constants, 3 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Time Averaged Water Depth - (Measured in Meter) - Time Averaged Water Depth is the depth of water during average time.
Non-propagated Wave Values - Non-propagated Wave Values is elements of a wave function that don't transmit energy or information, often called standing waves.
Wave Period - (Measured in Second) - Wave Period refers to the time it takes for two successive wave crests (or troughs) to pass through a given point.

STEP 1: Convert Input(s) to Base Unit

Non-propagated Wave Values: 0.047 --> No Conversion Required
Wave Period: 95 Second --> 95 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_T = [g]*((Ω*T_p)/(2*pi))^(1/0.5) --> [g]*((0.047*95)/(2*pi))^(1/0.5)

Evaluating ... ...

d_T = 4.95226487686454

STEP 3: Convert Result to Output's Unit

4.95226487686454 Meter --> No Conversion Required

FINAL ANSWER

4.95226487686454 ≈ 4.952265 Meter <-- Time Averaged Water Depth

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Hydrodynamics of Tidal Inlets 1 » Inlet Hydrodynamics » Bay Superelevation, Effect of Freshwater Inflow, Multiple Inlets and Wave Current Interaction » Wave Current Interaction » Channel Depth in Non-propagated Wave Values

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Wave Current Interaction Calculators

Non-propagated Wave Values in Forbidden Region Boundary Line

LaTeX Go Non-propagated Wave Values of 'F' = (Velocity in Channel*cos(Angle b/w Horizontal Velocity and Horizontal Wave))/([g]*Time Averaged Water Depth)^0.5

Effect of Current on Wave Height

LaTeX Go Wave Height = Inlet Current Wave Height Factor*Wave Height Entering Inlet

Inlet Current Wave Height Factor

LaTeX Go Inlet Current Wave Height Factor = Wave Height/Wave Height Entering Inlet

Wave Height Entering Inlet

LaTeX Go Wave Height Entering Inlet = Wave Height/Inlet Current Wave Height Factor

Channel Depth in Non-propagated Wave Values Formula

LaTeX Go

Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5)
d_T = [g]*((Ω*T_p)/(2*pi))^(1/0.5)

What are the factors affecting Wave Height?

Wave Height is affected by wind speed, wind duration (or how long the wind blows), and fetch, which is the distance over water that the wind blows in a single direction. If wind speed is slow, only small waves result, regardless of wind duration or fetch.

What is waves and currents?

Waves are created by the wind and then radiate in all directions away from the disturbance. Currents represent the movement of water particles which is controlled by winds and density differences. Waves and currents can travel in opposite directions.

How to Calculate Channel Depth in Non-propagated Wave Values?

Channel Depth in Non-propagated Wave Values calculator uses Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5) to calculate the Time Averaged Water Depth, The Channel Depth in Non-propagated Wave Values of Ω in forbidden region is defined as the vertical distance of the lowest point of a channel section from the free surface of water and influences the wave height factor. Time Averaged Water Depth is denoted by d_T symbol.

How to calculate Channel Depth in Non-propagated Wave Values using this online calculator? To use this online calculator for Channel Depth in Non-propagated Wave Values, enter Non-propagated Wave Values (Ω) & Wave Period (T_p) and hit the calculate button. Here is how the Channel Depth in Non-propagated Wave Values calculation can be explained with given input values -> 4.952265 = [g]*((0.047*95)/(2*pi))^(1/0.5).

FAQ

What is Channel Depth in Non-propagated Wave Values?

The Channel Depth in Non-propagated Wave Values of Ω in forbidden region is defined as the vertical distance of the lowest point of a channel section from the free surface of water and influences the wave height factor and is represented as d_T = [g]*((Ω*T_p)/(2*pi))^(1/0.5) or Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5). Non-propagated Wave Values is elements of a wave function that don't transmit energy or information, often called standing waves & Wave Period refers to the time it takes for two successive wave crests (or troughs) to pass through a given point.

How to calculate Channel Depth in Non-propagated Wave Values?

The Channel Depth in Non-propagated Wave Values of Ω in forbidden region is defined as the vertical distance of the lowest point of a channel section from the free surface of water and influences the wave height factor is calculated using Time Averaged Water Depth = [g]*((Non-propagated Wave Values*Wave Period)/(2*pi))^(1/0.5). To calculate Channel Depth in Non-propagated Wave Values, you need Non-propagated Wave Values (Ω) & Wave Period (T_p). With our tool, you need to enter the respective value for Non-propagated Wave Values & Wave Period and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Time Averaged Water Depth?

In this formula, Time Averaged Water Depth uses Non-propagated Wave Values & Wave Period. We can use 1 other way(s) to calculate the same, which is/are as follows -

Time Averaged Water Depth = (((Velocity in Channel*cos(Angle b/w Horizontal Velocity and Horizontal Wave)/Non-propagated Wave Values of 'F'))^2)/[g]

Home

FREE PDFs

🔍 Search