Change of Grade given Length Calculator

✖Length of Vertical Curve is determined by the permissible rate of change of grade or from centrifugal consideration as appropriate.ⓘ Length of Vertical Curve [L]			+10% -10%
✖Permissible Rate is the maximum allowable rate of change in grade for vertical curves. For railway work 0.1% rate of change of grade is permitted at summits and 0.05% per chain at sags.ⓘ Permissible Rate [P_N]			+10% -10%

✖Change in grade is the algebraic sum of two grades in the vertical curve. It is expressed in percentage.ⓘ Change of Grade given Length [N]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Surveying Vertical Curves Formulas PDF PDF Image

Change of Grade given Length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Change in Grade = Length of Vertical Curve*Permissible Rate
N = L*P_N
This formula uses 3 Variables

Variables Used

Change in Grade - Change in grade is the algebraic sum of two grades in the vertical curve. It is expressed in percentage.
Length of Vertical Curve - (Measured in Meter) - Length of Vertical Curve is determined by the permissible rate of change of grade or from centrifugal consideration as appropriate.
Permissible Rate - Permissible Rate is the maximum allowable rate of change in grade for vertical curves. For railway work 0.1% rate of change of grade is permitted at summits and 0.05% per chain at sags.

STEP 1: Convert Input(s) to Base Unit

Length of Vertical Curve: 20 Meter --> 20 Meter No Conversion Required
Permissible Rate: 0.07 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N = L*P_N --> 20*0.07

Evaluating ... ...

N = 1.4

STEP 3: Convert Result to Output's Unit

1.4 --> No Conversion Required

FINAL ANSWER

1.4 <-- Change in Grade

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Surveying Vertical Curves » Change of Grade given Length

Credits

Created by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has created this Calculator and 500+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Surveying Vertical Curves Calculators

Length of Curve Based on Centrifugal Ratio

LaTeX Go Length of Curve = ((Upgrade)-(Downgrade))*Vehicle Velocity^2/(100*Allowable Centrifugal Acceleration)

Permissible Grade given Length

LaTeX Go Permissible Rate = Change in Grade/Length of Vertical Curve

Change of Grade given Length

LaTeX Go Change in Grade = Length of Vertical Curve*Permissible Rate

Length of Vertical Curve

LaTeX Go Length of Vertical Curve = Change in Grade/Permissible Rate

Change of Grade given Length Formula

LaTeX Go

Change in Grade = Length of Vertical Curve*Permissible Rate
N = L*P_N

What is Vertical Curve?

A curve used to connect two different grade lines of railways or highways is called a vertical curve. Such a curve is introduced to round off the angle and to obtain a gradual change in the gradient so that the vehicles passing over it may not experience a shock or a sudden jerk.

How to Calculate Change of Grade given Length?

Change of Grade given Length calculator uses Change in Grade = Length of Vertical Curve*Permissible Rate to calculate the Change in Grade, Change of Grade given Length is defined as total algebraic sum of vertical grades obtained from curves. Change in Grade is denoted by N symbol.

How to calculate Change of Grade given Length using this online calculator? To use this online calculator for Change of Grade given Length, enter Length of Vertical Curve (L) & Permissible Rate (P_N) and hit the calculate button. Here is how the Change of Grade given Length calculation can be explained with given input values -> 1.4 = 20*0.07.

FAQ

What is Change of Grade given Length?

Change of Grade given Length is defined as total algebraic sum of vertical grades obtained from curves and is represented as N = L*P_N or Change in Grade = Length of Vertical Curve*Permissible Rate. Length of Vertical Curve is determined by the permissible rate of change of grade or from centrifugal consideration as appropriate & Permissible Rate is the maximum allowable rate of change in grade for vertical curves. For railway work 0.1% rate of change of grade is permitted at summits and 0.05% per chain at sags.

How to calculate Change of Grade given Length?

Change of Grade given Length is defined as total algebraic sum of vertical grades obtained from curves is calculated using Change in Grade = Length of Vertical Curve*Permissible Rate. To calculate Change of Grade given Length, you need Length of Vertical Curve (L) & Permissible Rate (P_N). With our tool, you need to enter the respective value for Length of Vertical Curve & Permissible Rate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search