Change in Retention Time given Resolution and Average Width of Peak Calculator

✖The Resolution is defined as the resolving power of the column.ⓘ Resolution [R]			+10% -10%
✖The Average Width of Peaks is the addition of the width of the number of peaks divided by the total number of peaks.ⓘ Average Width of Peaks [w_av]			+10% -10%

✖Change in Retention Time given R and W is the subtraction of the retention time of solute 2 from solute 1.ⓘ Change in Retention Time given Resolution and Average Width of Peak [Δt_{r_RandW}]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Method of Separation Technique Formula PDF PDF Image

Change in Retention Time given Resolution and Average Width of Peak Solution

STEP 0: Pre-Calculation Summary

Formula Used

Change in Retention Time given R and W = (Resolution*Average Width of Peaks)
Δt_{r_RandW} = (R*w_av)
This formula uses 3 Variables

Variables Used

Change in Retention Time given R and W - (Measured in Minute) - Change in Retention Time given R and W is the subtraction of the retention time of solute 2 from solute 1.
Resolution - The Resolution is defined as the resolving power of the column.
Average Width of Peaks - (Measured in Minute) - The Average Width of Peaks is the addition of the width of the number of peaks divided by the total number of peaks.

STEP 1: Convert Input(s) to Base Unit

Resolution: 11 --> No Conversion Required
Average Width of Peaks: 4 Second --> 0.0666666666666667 Minute (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Δt_{r_RandW} = (R*w_av) --> (11*0.0666666666666667)

Evaluating ... ...

Δt_{r_RandW} = 0.733333333333334

STEP 3: Convert Result to Output's Unit

44 Second --> No Conversion Required

FINAL ANSWER

44 Second <-- Change in Retention Time given R and W

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Analytical chemistry » Method of Separation Technique » Change in Retention Time and Volume » Change in Retention Time given Resolution and Average Width of Peak

Credits

Created by Prashant Singh

K J Somaiya College of science (K J Somaiya), Mumbai

Prashant Singh has created this Calculator and 700+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Change in Retention Time and Volume Calculators

Change in Retention Time given Half of Average Width of Peaks

LaTeX Go Change in Retention Time given H = (Resolution*Half of Average Width of Peaks)/0.589

Change in Retention Volume given Resolution and Average Width of Peak

LaTeX Go Change in retention volume given Rand W = (Resolution*Average Width of Peaks)

Change in Retention Time given Resolution and Average Width of Peak

LaTeX Go Change in Retention Time given R and W = (Resolution*Average Width of Peaks)

< Distribution Ratio and Length of Column Calculators

Separation Factor of two solutes A and B

LaTeX Go Separation Factor A and B = (Distribution Ratio of Solute A/Distribution Ratio of Solute B)

Distribution Ratio

LaTeX Go Actual Distribution Ratio = (Concentration in Organic Phase/Concentration in Aqueous Phase)

Distribution Ratio of Solute A given Separation Factor

LaTeX Go Distribution Ratio A = (Separation Factor*Distribution Ratio of Solute B)

Distribution Ratio of Solute B given Separation Factor

LaTeX Go Distribution Ratio B = (Distribution Ratio of Solute A/Separation Factor)

Change in Retention Time given Resolution and Average Width of Peak Formula

LaTeX Go

Change in Retention Time given R and W = (Resolution*Average Width of Peaks)
Δt_{r_RandW} = (R*w_av)

What is Chromatography?

A separation process based on the various partitioning coefficients of different solutes between the two phases.
Involving the interaction of solute(s) and two phases
Mobile phase: A gas or liquid that moves through the column.
Stationary phase: A solid or liquid that remains in place.

What are the types of Chromatography?

1) Adsorption chromatography
2) Ion-exchange chromatography
3) Partition chromatography
4) Molecular Size exclusion chromatography
5) Affinity chromatography

How to Calculate Change in Retention Time given Resolution and Average Width of Peak?

Change in Retention Time given Resolution and Average Width of Peak calculator uses Change in Retention Time given R and W = (Resolution*Average Width of Peaks) to calculate the Change in Retention Time given R and W, The Change in retention time given resolution and average width of peak formula is defined as the product of the resolution with the average width of the peaks. Change in Retention Time given R and W is denoted by Δt_{r_RandW} symbol.

How to calculate Change in Retention Time given Resolution and Average Width of Peak using this online calculator? To use this online calculator for Change in Retention Time given Resolution and Average Width of Peak, enter Resolution (R) & Average Width of Peaks (w_av) and hit the calculate button. Here is how the Change in Retention Time given Resolution and Average Width of Peak calculation can be explained with given input values -> 44 = (11*4).

FAQ

What is Change in Retention Time given Resolution and Average Width of Peak?

The Change in retention time given resolution and average width of peak formula is defined as the product of the resolution with the average width of the peaks and is represented as Δt_{r_RandW} = (R*w_av) or Change in Retention Time given R and W = (Resolution*Average Width of Peaks). The Resolution is defined as the resolving power of the column & The Average Width of Peaks is the addition of the width of the number of peaks divided by the total number of peaks.

How to calculate Change in Retention Time given Resolution and Average Width of Peak?

The Change in retention time given resolution and average width of peak formula is defined as the product of the resolution with the average width of the peaks is calculated using Change in Retention Time given R and W = (Resolution*Average Width of Peaks). To calculate Change in Retention Time given Resolution and Average Width of Peak, you need Resolution (R) & Average Width of Peaks (w_av). With our tool, you need to enter the respective value for Resolution & Average Width of Peaks and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search