Change in Resistance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity
ΔR = ΔH*ΔS
This formula uses 3 Variables
Variables Used
Resistance Change - (Measured in Ohm) - Resistance Change refers to the alteration in electrical resistance caused by variations in incident light intensity.
Irradiation Change - (Measured in Watt per Square Meter) - Irradiation Change is defined as the radiant flux (power) received by a surface per unit area.
Photoresistive Transducer Sensitivity - Photoresistive transducer sensitivity is the degree to which its resistance changes in response to variations in light intensity.
STEP 1: Convert Input(s) to Base Unit
Irradiation Change: 30 Watt per Square Meter --> 30 Watt per Square Meter No Conversion Required
Photoresistive Transducer Sensitivity: 1.16 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ΔR = ΔH*ΔS --> 30*1.16
Evaluating ... ...
ΔR = 34.8
STEP 3: Convert Result to Output's Unit
34.8 Ohm --> No Conversion Required
FINAL ANSWER
34.8 Ohm <-- Resistance Change
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Transducers Calculators

Capacitance of Transducer
​ LaTeX ​ Go Transducer Capacitance = Current Generator Capacitance-(Amplifier Capacitance+Cable Capacitance)
Current Generator Capacitance
​ LaTeX ​ Go Current Generator Capacitance = Transducer Capacitance+Amplifier Capacitance+Cable Capacitance
Sensitivity of Photoresistive Transducer
​ LaTeX ​ Go Photoresistive Transducer Sensitivity = Resistance Change/Irradiation Change
Change in Resistance
​ LaTeX ​ Go Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity

Change in Resistance Formula

​LaTeX ​Go
Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity
ΔR = ΔH*ΔS

What affects photoresist adhesion?

This peel formation is mainly caused by three factors: low adhesion energy of the photoresist to metal, strain energy of the photoresist generated from the nitrogen gas, and transfer of irradiation energy by UV light to the photoresist film.

How to Calculate Change in Resistance?

Change in Resistance calculator uses Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity to calculate the Resistance Change, The Change in Resistance formula is defined as the change in electrical resistance observed in the photoresistive transducer due to variations in irradiation or light intensity. It is determined by both the magnitude of the irradiation change and the sensitivity of the transducer to those changes. Resistance Change is denoted by ΔR symbol.

How to calculate Change in Resistance using this online calculator? To use this online calculator for Change in Resistance, enter Irradiation Change (ΔH) & Photoresistive Transducer Sensitivity (ΔS) and hit the calculate button. Here is how the Change in Resistance calculation can be explained with given input values -> 3.6 = 30*1.16.

FAQ

What is Change in Resistance?
The Change in Resistance formula is defined as the change in electrical resistance observed in the photoresistive transducer due to variations in irradiation or light intensity. It is determined by both the magnitude of the irradiation change and the sensitivity of the transducer to those changes and is represented as ΔR = ΔH*ΔS or Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity. Irradiation Change is defined as the radiant flux (power) received by a surface per unit area & Photoresistive transducer sensitivity is the degree to which its resistance changes in response to variations in light intensity.
How to calculate Change in Resistance?
The Change in Resistance formula is defined as the change in electrical resistance observed in the photoresistive transducer due to variations in irradiation or light intensity. It is determined by both the magnitude of the irradiation change and the sensitivity of the transducer to those changes is calculated using Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity. To calculate Change in Resistance, you need Irradiation Change (ΔH) & Photoresistive Transducer Sensitivity (ΔS). With our tool, you need to enter the respective value for Irradiation Change & Photoresistive Transducer Sensitivity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!