Change in Radius of Elementary Cylinder given Rate of change of Volume Calculator

✖Rate of Change of Volume is the ratio of change in volume to change in time.ⓘ Rate of Change of Volume [δVδt]			+10% -10%
✖Radius of Elementary Cylinder is defined as the distance of the two circular bases from the center to the outer boundary.ⓘ Radius of Elementary Cylinder [r]			+10% -10%
✖Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.ⓘ Storage Coefficient [S]			+10% -10%
✖Rate of Change of Height is the ratio of change in height to change in time.ⓘ Rate of Change of Height [δhδt]			+10% -10%

✖Change in Radius of Elementary Cylinder is the rate of change of a cylinder's radius is equal to twice the rate of change of its height.ⓘ Change in Radius of Elementary Cylinder given Rate of change of Volume [dr]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unsteady Flow Formulas PDF PDF Image

Change in Radius of Elementary Cylinder given Rate of change of Volume Solution

STEP 0: Pre-Calculation Summary

Formula Used

Change in Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height)
dr = δVδt/(2*pi*r*S*δhδt)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Change in Radius of Elementary Cylinder - (Measured in Meter) - Change in Radius of Elementary Cylinder is the rate of change of a cylinder's radius is equal to twice the rate of change of its height.
Rate of Change of Volume - (Measured in Cubic Centimeter per Second) - Rate of Change of Volume is the ratio of change in volume to change in time.
Radius of Elementary Cylinder - (Measured in Meter) - Radius of Elementary Cylinder is defined as the distance of the two circular bases from the center to the outer boundary.
Storage Coefficient - Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.
Rate of Change of Height - (Measured in Meter per Second) - Rate of Change of Height is the ratio of change in height to change in time.

STEP 1: Convert Input(s) to Base Unit

Rate of Change of Volume: 0.92 Cubic Centimeter per Second --> 0.92 Cubic Centimeter per Second No Conversion Required
Radius of Elementary Cylinder: 3.33 Meter --> 3.33 Meter No Conversion Required
Storage Coefficient: 1.2 --> No Conversion Required
Rate of Change of Height: 0.05 Meter per Second --> 0.05 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

dr = δVδt/(2*pi*r*S*δhδt) --> 0.92/(2*pi*3.33*1.2*0.05)

Evaluating ... ...

dr = 0.732845583806525

STEP 3: Convert Result to Output's Unit

0.732845583806525 Meter --> No Conversion Required

FINAL ANSWER

0.732845583806525 ≈ 0.732846 Meter <-- Change in Radius of Elementary Cylinder

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Unsteady Flow » Rate of Change of Volume » Change in Radius of Elementary Cylinder given Rate of change of Volume

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Rate of Change of Volume Calculators

Rate of Change of Volume given Radius of Elementary Cylinder

LaTeX Go Rate of Change of Volume = (2*pi*Radius of Elementary Cylinder*Change in Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height)

Radius of Elementary Cylinder given Rate of change of Volume

LaTeX Go Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Change in Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height)

Area of Aquifer given Rate of Change of Volume

LaTeX Go Aquifer Area = Rate of Change of Volume/((Rate of Change of Height)*Storage Coefficient)

Rate of Change of Volume given Storage Coefficient

LaTeX Go Rate of Change of Volume = (Rate of Change of Height)*Storage Coefficient*Aquifer Area

Change in Radius of Elementary Cylinder given Rate of change of Volume Formula

LaTeX Go

Change in Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height)
dr = δVδt/(2*pi*r*S*δhδt)

What is Discharge?

The amount of fluid passing a section of a stream in unit time is called the discharge. If v is the mean velocity and A is the cross sectional area, the discharge Q is defined by Q = Av which is known as volume flow rate.

How to Calculate Change in Radius of Elementary Cylinder given Rate of change of Volume?

Change in Radius of Elementary Cylinder given Rate of change of Volume calculator uses Change in Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height) to calculate the Change in Radius of Elementary Cylinder, Change in Radius of Elementary Cylinder given Rate of change of Volume formula is defined as a measure of the alteration in the radius of an elementary cylinder in an unsteady flow context, where the volume of the fluid is changing with time. Change in Radius of Elementary Cylinder is denoted by dr symbol.

How to calculate Change in Radius of Elementary Cylinder given Rate of change of Volume using this online calculator? To use this online calculator for Change in Radius of Elementary Cylinder given Rate of change of Volume, enter Rate of Change of Volume (δVδt), Radius of Elementary Cylinder (r), Storage Coefficient (S) & Rate of Change of Height (δhδt) and hit the calculate button. Here is how the Change in Radius of Elementary Cylinder given Rate of change of Volume calculation can be explained with given input values -> 0.735053 = 9.2E-07/(2*pi*3.33*1.2*0.05).

FAQ

What is Change in Radius of Elementary Cylinder given Rate of change of Volume?

Change in Radius of Elementary Cylinder given Rate of change of Volume formula is defined as a measure of the alteration in the radius of an elementary cylinder in an unsteady flow context, where the volume of the fluid is changing with time and is represented as dr = δVδt/(2*pi*r*S*δhδt) or Change in Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height). Rate of Change of Volume is the ratio of change in volume to change in time, Radius of Elementary Cylinder is defined as the distance of the two circular bases from the center to the outer boundary, Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer & Rate of Change of Height is the ratio of change in height to change in time.

How to calculate Change in Radius of Elementary Cylinder given Rate of change of Volume?

Change in Radius of Elementary Cylinder given Rate of change of Volume formula is defined as a measure of the alteration in the radius of an elementary cylinder in an unsteady flow context, where the volume of the fluid is changing with time is calculated using Change in Radius of Elementary Cylinder = Rate of Change of Volume/(2*pi*Radius of Elementary Cylinder*Storage Coefficient*Rate of Change of Height). To calculate Change in Radius of Elementary Cylinder given Rate of change of Volume, you need Rate of Change of Volume (δVδt), Radius of Elementary Cylinder (r), Storage Coefficient (S) & Rate of Change of Height (δhδt). With our tool, you need to enter the respective value for Rate of Change of Volume, Radius of Elementary Cylinder, Storage Coefficient & Rate of Change of Height and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search