Change in Pressure given Leakage Velocity Calculator

✖Incremental Length in Direction of Velocity is defined as a length increase in velocity direction.ⓘ Incremental Length in Direction of Velocity [d_l]			+10% -10%
✖The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance.ⓘ Absolute Viscosity of Oil in Seals [μ]			+10% -10%
✖Velocity is a vector quantity (it has both magnitude and direction) and is the rate of change of the position of an object with respect to time.ⓘ Velocity [v]			+10% -10%
✖Radius of Seal is a radial line from the focus to any point of a curve.ⓘ Radius of Seal [r_s]			+10% -10%

✖Pressure Change is defined as the difference between final pressure and initial pressure. In differential form, it is represented as dP.ⓘ Change in Pressure given Leakage Velocity [Δp]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Seals Formulas PDF PDF Image

Change in Pressure given Leakage Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure Change = (8*Incremental Length in Direction of Velocity*Absolute Viscosity of Oil in Seals*Velocity)/(Radius of Seal^2)
Δp = (8*d_l*μ*v)/(r_s^2)
This formula uses 5 Variables

Variables Used

Pressure Change - (Measured in Pascal) - Pressure Change is defined as the difference between final pressure and initial pressure. In differential form, it is represented as dP.
Incremental Length in Direction of Velocity - (Measured in Meter) - Incremental Length in Direction of Velocity is defined as a length increase in velocity direction.
Absolute Viscosity of Oil in Seals - (Measured in Pascal Second) - The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance.
Velocity - (Measured in Meter per Second) - Velocity is a vector quantity (it has both magnitude and direction) and is the rate of change of the position of an object with respect to time.
Radius of Seal - (Measured in Meter) - Radius of Seal is a radial line from the focus to any point of a curve.

STEP 1: Convert Input(s) to Base Unit

Incremental Length in Direction of Velocity: 1.5 Millimeter --> 0.0015 Meter (Check conversion here)
Absolute Viscosity of Oil in Seals: 7.8 Centipoise --> 0.0078 Pascal Second (Check conversion here)
Velocity: 119.6581 Meter per Second --> 119.6581 Meter per Second No Conversion Required
Radius of Seal: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Δp = (8*d_l*μ*v)/(r_s^2) --> (8*0.0015*0.0078*119.6581)/(0.01^2)

Evaluating ... ...

Δp = 111.9999816

STEP 3: Convert Result to Output's Unit

111.9999816 Pascal -->0.0001119999816 Megapascal (Check conversion here)

FINAL ANSWER

0.0001119999816 ≈ 0.000112 Megapascal <-- Pressure Change

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Seals » Mechanical » Straight Cut Sealings » Change in Pressure given Leakage Velocity

Credits

Created by sanjay shiva

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh

sanjay shiva has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Straight Cut Sealings Calculators

Outer Diameter of Seal Ring given Loss of Liquid Head

LaTeX Go Outside Diameter of Seal Ring = sqrt((64*Absolute Viscosity of Oil in Seals*Velocity)/(2*[g]*Density Of Liquid*Loss of Liquid Head))

Absolute Viscosity given Loss of Liquid Head

LaTeX Go Absolute Viscosity of Oil in Seals = (2*[g]*Density Of Liquid*Loss of Liquid Head*Outside Diameter of Seal Ring^2)/(64*Velocity)

Density of Liquid given Loss of Liquid Head

LaTeX Go Density Of Liquid = (64*Absolute Viscosity of Oil in Seals*Velocity)/(2*[g]*Loss of Liquid Head*Outside Diameter of Seal Ring^2)

Loss of Liquid Head

LaTeX Go Loss of Liquid Head = (64*Absolute Viscosity of Oil in Seals*Velocity)/(2*[g]*Density Of Liquid*Outside Diameter of Seal Ring^2)

Change in Pressure given Leakage Velocity Formula

LaTeX Go

Pressure Change = (8*Incremental Length in Direction of Velocity*Absolute Viscosity of Oil in Seals*Velocity)/(Radius of Seal^2)
Δp = (8*d_l*μ*v)/(r_s^2)

What is Fluid pressure?

Fluid pressure refers to the pressure exerted by both liquids and gas.The SI Unit of Pressure is the Pascal (Pa).

How to Calculate Change in Pressure given Leakage Velocity?

Change in Pressure given Leakage Velocity calculator uses Pressure Change = (8*Incremental Length in Direction of Velocity*Absolute Viscosity of Oil in Seals*Velocity)/(Radius of Seal^2) to calculate the Pressure Change, Change in Pressure given Leakage Velocity formula is defined as the pressure exerted by both liquids and gas. Pressure Change is denoted by Δp symbol.

How to calculate Change in Pressure given Leakage Velocity using this online calculator? To use this online calculator for Change in Pressure given Leakage Velocity, enter Incremental Length in Direction of Velocity (d_l), Absolute Viscosity of Oil in Seals (μ), Velocity (v) & Radius of Seal (r_s) and hit the calculate button. Here is how the Change in Pressure given Leakage Velocity calculation can be explained with given input values -> 1.1E-10 = (8*0.0015*0.0078*119.6581)/(0.01^2).

FAQ

What is Change in Pressure given Leakage Velocity?

Change in Pressure given Leakage Velocity formula is defined as the pressure exerted by both liquids and gas and is represented as Δp = (8*d_l*μ*v)/(r_s^2) or Pressure Change = (8*Incremental Length in Direction of Velocity*Absolute Viscosity of Oil in Seals*Velocity)/(Radius of Seal^2). Incremental Length in Direction of Velocity is defined as a length increase in velocity direction, The Absolute Viscosity of Oil in Seals represents the ratio of a fluid's shear stress to its velocity gradient. It is a fluid's internal flow resistance, Velocity is a vector quantity (it has both magnitude and direction) and is the rate of change of the position of an object with respect to time & Radius of Seal is a radial line from the focus to any point of a curve.

How to calculate Change in Pressure given Leakage Velocity?

Change in Pressure given Leakage Velocity formula is defined as the pressure exerted by both liquids and gas is calculated using Pressure Change = (8*Incremental Length in Direction of Velocity*Absolute Viscosity of Oil in Seals*Velocity)/(Radius of Seal^2). To calculate Change in Pressure given Leakage Velocity, you need Incremental Length in Direction of Velocity (d_l), Absolute Viscosity of Oil in Seals (μ), Velocity (v) & Radius of Seal (r_s). With our tool, you need to enter the respective value for Incremental Length in Direction of Velocity, Absolute Viscosity of Oil in Seals, Velocity & Radius of Seal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search