Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force Calculator

✖Centrifugal Force at Maximum Radius of Rotation is the outward force that draws a rotating body away from the center of rotation at maximum radius.ⓘ Centrifugal Force at Maximum Radius of Rotation [F_rc2]			+10% -10%
✖Centrifugal Force at Minimum Radius of Rotation is the force that acts on an object as it rotates around a circular path at its minimum radius.ⓘ Centrifugal Force at Minimum Radius of Rotation [F_rc1]			+10% -10%
✖Maximum Radius of Rotation is the maximum distance from the axis of rotation where an object can rotate without flying apart due to centrifugal force.ⓘ Maximum Radius of Rotation [r₂]			+10% -10%
✖Radius of Rotation if Governor is in Mid-Position is the distance from the axis of rotation to the point where the governor is positioned.ⓘ Radius of Rotation if Governor is in Mid-Position [r_rotation]			+10% -10%
✖Minimum Radius of Rotation is the smallest distance from the axis of rotation where an object can rotate without falling apart due to centrifugal force.ⓘ Minimum Radius of Rotation [r₁]			+10% -10%

✖Centrifugal Force is the apparent outward force that draws a rotating body away from the center of rotation, resulting in a circular motion.ⓘ Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force [F_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Theory of Machine Formula PDF PDF Image

Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Centrifugal Force = Centrifugal Force at Maximum Radius of Rotation-(Centrifugal Force at Maximum Radius of Rotation-Centrifugal Force at Minimum Radius of Rotation)*(Maximum Radius of Rotation-Radius of Rotation if Governor is in Mid-Position)/(Maximum Radius of Rotation-Minimum Radius of Rotation)
F_c = F_rc2-(F_rc2-F_rc1)*(r₂-r_rotation)/(r₂-r₁)
This formula uses 6 Variables

Variables Used

Centrifugal Force - (Measured in Newton) - Centrifugal Force is the apparent outward force that draws a rotating body away from the center of rotation, resulting in a circular motion.
Centrifugal Force at Maximum Radius of Rotation - (Measured in Newton) - Centrifugal Force at Maximum Radius of Rotation is the outward force that draws a rotating body away from the center of rotation at maximum radius.
Centrifugal Force at Minimum Radius of Rotation - (Measured in Newton) - Centrifugal Force at Minimum Radius of Rotation is the force that acts on an object as it rotates around a circular path at its minimum radius.
Maximum Radius of Rotation - (Measured in Meter) - Maximum Radius of Rotation is the maximum distance from the axis of rotation where an object can rotate without flying apart due to centrifugal force.
Radius of Rotation if Governor is in Mid-Position - (Measured in Meter) - Radius of Rotation if Governor is in Mid-Position is the distance from the axis of rotation to the point where the governor is positioned.
Minimum Radius of Rotation - (Measured in Meter) - Minimum Radius of Rotation is the smallest distance from the axis of rotation where an object can rotate without falling apart due to centrifugal force.

STEP 1: Convert Input(s) to Base Unit

Centrifugal Force at Maximum Radius of Rotation: 21 Newton --> 21 Newton No Conversion Required
Centrifugal Force at Minimum Radius of Rotation: 15.4 Newton --> 15.4 Newton No Conversion Required
Maximum Radius of Rotation: 15 Meter --> 15 Meter No Conversion Required
Radius of Rotation if Governor is in Mid-Position: 47 Meter --> 47 Meter No Conversion Required
Minimum Radius of Rotation: 2.2 Meter --> 2.2 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_c = F_rc2-(F_rc2-F_rc1)*(r₂-r_rotation)/(r₂-r₁) --> 21-(21-15.4)*(15-47)/(15-2.2)

Evaluating ... ...

F_c = 35

STEP 3: Convert Result to Output's Unit

35 Newton --> No Conversion Required

FINAL ANSWER

35 Newton <-- Centrifugal Force

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Governors » Mechanical » Centrifugal Force » Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Centrifugal Force Calculators

Centrifugal Force at Maximum Equilibrium Speed on Each Ball for Wilson-Hartnell Governor

LaTeX Go Centrifugal Force at Maximum Equilibrium Speed = Tension in Main Spring at Maximum Speed+(Mass on Sleeve*Acceleration due to Gravity+(Tension in Auxiliary Spring at Maximum Speed*Distance of Auxiliary Spring from Mid of Lever)/Distance of Main Spring from Mid Point of Lever)*Length of Sleeve Arm of Lever/2*Length of Ball Arm of Lever

Centrifugal Force at Minimum Equilibrium Speed on Each Ball for Wilson-Hartnell Governor

LaTeX Go Centrifugal Force at Minimum Equilibrium Speed = Tension in Main Spring at Minimum Speed+(Mass on Sleeve*Acceleration due to Gravity+(Tension in Auxiliary Spring at Minimum Speed*Distance of Auxiliary Spring from Mid of Lever)/Distance of Main Spring from Mid Point of Lever)*Length of Sleeve Arm of Lever/2*Length of Ball Arm of Lever

Centrifugal Force at Maximum Radius of Rotation

LaTeX Go Centrifugal Force at Maximum Radius of Rotation = Mass of Ball*Angular Speed of Governor at Maximum Radius^2*Maximum Radius of Rotation

Centrifugal Force at Minimum Radius of Rotation

LaTeX Go Centrifugal Force at Minimum Radius of Rotation = Mass of Ball*Angular Speed of Governor at Minimum Radius^2*Minimum Radius of Rotation

Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force Formula

LaTeX Go

What is Centrifugal Force?

Centrifugal force is the apparent force that acts outward on an object moving in a circular path. It occurs due to the object's inertia, which resists the change in direction. While not an actual force, it's felt when you're in a rotating system, like being pushed outward on a spinning ride or vehicle.

How to Calculate Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force?

Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force calculator uses Centrifugal Force = Centrifugal Force at Maximum Radius of Rotation-(Centrifugal Force at Maximum Radius of Rotation-Centrifugal Force at Minimum Radius of Rotation)*(Maximum Radius of Rotation-Radius of Rotation if Governor is in Mid-Position)/(Maximum Radius of Rotation-Minimum Radius of Rotation) to calculate the Centrifugal Force, Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force formula is defined as the force exerted by a rotating body at an intermediate position, which is a critical component in the design of Hartnell Governor, a mechanical device used to regulate the speed of an engine. Centrifugal Force is denoted by F_c symbol.

How to calculate Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force using this online calculator? To use this online calculator for Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force, enter Centrifugal Force at Maximum Radius of Rotation (F_rc2), Centrifugal Force at Minimum Radius of Rotation (F_rc1), Maximum Radius of Rotation (r₂), Radius of Rotation if Governor is in Mid-Position (r_rotation) & Minimum Radius of Rotation (r₁) and hit the calculate button. Here is how the Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force calculation can be explained with given input values -> 22.75 = 21-(21-15.4)*(15-47)/(15-2.2).

FAQ

What is Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force?

Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force formula is defined as the force exerted by a rotating body at an intermediate position, which is a critical component in the design of Hartnell Governor, a mechanical device used to regulate the speed of an engine and is represented as F_c = F_rc2-(F_rc2-F_rc1)*(r₂-r_rotation)/(r₂-r₁) or Centrifugal Force = Centrifugal Force at Maximum Radius of Rotation-(Centrifugal Force at Maximum Radius of Rotation-Centrifugal Force at Minimum Radius of Rotation)*(Maximum Radius of Rotation-Radius of Rotation if Governor is in Mid-Position)/(Maximum Radius of Rotation-Minimum Radius of Rotation). Centrifugal Force at Maximum Radius of Rotation is the outward force that draws a rotating body away from the center of rotation at maximum radius, Centrifugal Force at Minimum Radius of Rotation is the force that acts on an object as it rotates around a circular path at its minimum radius, Maximum Radius of Rotation is the maximum distance from the axis of rotation where an object can rotate without flying apart due to centrifugal force, Radius of Rotation if Governor is in Mid-Position is the distance from the axis of rotation to the point where the governor is positioned & Minimum Radius of Rotation is the smallest distance from the axis of rotation where an object can rotate without falling apart due to centrifugal force.

How to calculate Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force?

Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force formula is defined as the force exerted by a rotating body at an intermediate position, which is a critical component in the design of Hartnell Governor, a mechanical device used to regulate the speed of an engine is calculated using Centrifugal Force = Centrifugal Force at Maximum Radius of Rotation-(Centrifugal Force at Maximum Radius of Rotation-Centrifugal Force at Minimum Radius of Rotation)*(Maximum Radius of Rotation-Radius of Rotation if Governor is in Mid-Position)/(Maximum Radius of Rotation-Minimum Radius of Rotation). To calculate Centrifugal Force at Intermediate Position for Hartnell Governor for Minimum Force, you need Centrifugal Force at Maximum Radius of Rotation (F_rc2), Centrifugal Force at Minimum Radius of Rotation (F_rc1), Maximum Radius of Rotation (r₂), Radius of Rotation if Governor is in Mid-Position (r_rotation) & Minimum Radius of Rotation (r₁). With our tool, you need to enter the respective value for Centrifugal Force at Maximum Radius of Rotation, Centrifugal Force at Minimum Radius of Rotation, Maximum Radius of Rotation, Radius of Rotation if Governor is in Mid-Position & Minimum Radius of Rotation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Centrifugal Force?

In this formula, Centrifugal Force uses Centrifugal Force at Maximum Radius of Rotation, Centrifugal Force at Minimum Radius of Rotation, Maximum Radius of Rotation, Radius of Rotation if Governor is in Mid-Position & Minimum Radius of Rotation. We can use 3 other way(s) to calculate the same, which is/are as follows -

Centrifugal Force = Mass Attached at the Centre of the Leaf Spring*Angular Speed of the Governor Spindle^2*(Distance from Spindle Axis to Centre of Gravity+Deflection Center of Leaf Spring)
Centrifugal Force = Spring Force+(Mass on Sleeve*Acceleration due to Gravity*Length of Sleeve Arm of Lever)/(2*Length of Ball Arm of Lever)
Centrifugal Force = Tension in the Main Spring+(Mass on Sleeve*Acceleration due to Gravity+(Tension in the Auxiliary Spring*Distance of Auxiliary Spring from Mid of Lever)/Distance of Main Spring from Mid Point of Lever)*Length of Sleeve Arm of Lever/2*Length of Ball Arm of Lever

Home

FREE PDFs

🔍 Search