Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley Calculator

✖Diameter of Big Pulley is the distance from side to side of the flat of the Big pulley.ⓘ Diameter of Big Pulley [D]			+10% -10%
✖Diameter of Small Pulley is the distance from side to side of the flat of the Small pulley.ⓘ Diameter of Small Pulley [d]			+10% -10%
✖Wrap Angle on Big Pulley is the angle that the Belt wraps around the Big Pulley.ⓘ Wrap Angle on Big Pulley [α_b]			+10% -10%

✖Centre Distance between Pulleys is the distance between the centers of the big pulley and the small pulley.ⓘ Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley [C]

⎘ Copy

👎

Formula

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley Solution

STEP 0: Pre-Calculation Summary

Formula Used

Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((Wrap Angle on Big Pulley-3.14)/2))
C = (D-d)/(2*sin((α_b-3.14)/2))
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Centre Distance between Pulleys - (Measured in Meter) - Centre Distance between Pulleys is the distance between the centers of the big pulley and the small pulley.
Diameter of Big Pulley - (Measured in Meter) - Diameter of Big Pulley is the distance from side to side of the flat of the Big pulley.
Diameter of Small Pulley - (Measured in Meter) - Diameter of Small Pulley is the distance from side to side of the flat of the Small pulley.
Wrap Angle on Big Pulley - (Measured in Radian) - Wrap Angle on Big Pulley is the angle that the Belt wraps around the Big Pulley.

STEP 1: Convert Input(s) to Base Unit

Diameter of Big Pulley: 810 Millimeter --> 0.81 Meter (Check conversion here)
Diameter of Small Pulley: 270 Millimeter --> 0.27 Meter (Check conversion here)
Wrap Angle on Big Pulley: 200 Degree --> 3.490658503988 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = (D-d)/(2*sin((α_b-3.14)/2)) --> (0.81-0.27)/(2*sin((3.490658503988-3.14)/2))

Evaluating ... ...

C = 1.54787800511792

STEP 3: Convert Result to Output's Unit

1.54787800511792 Meter -->1547.87800511792 Millimeter (Check conversion here)

FINAL ANSWER

1547.87800511792 ≈ 1547.878 Millimeter <-- Centre Distance between Pulleys

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » Introduction of Belt Drives » Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Introduction of Belt Drives Calculators

Wrap Angle for Small Pulley

Go Wrap Angle on Small Pulley = 3.14-(2*(asin((Diameter of Big Pulley-Diameter of Small Pulley)/(2*Centre Distance between Pulleys))))

Center Distance from Small Pulley to Big Pulley given Wrap Angle of Small Pulley

Go Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((3.14-Wrap Angle on Small Pulley)/2))

Diameter of Small Pulley given Wrap Angle of Small Pulley

Go Diameter of Small Pulley = Diameter of Big Pulley-(2*Centre Distance between Pulleys*sin((3.14-Wrap Angle on Small Pulley)/2))

Diameter of Big Pulley given Wrap Angle of Small Pulley

Go Diameter of Big Pulley = Diameter of Small Pulley+(2*Centre Distance between Pulleys*sin((3.14-Wrap Angle on Small Pulley)/2))

Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley Formula

Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((Wrap Angle on Big Pulley-3.14)/2))
C = (D-d)/(2*sin((α_b-3.14)/2))

Define a Wrap Angle?

The wrap angle is defined as the angle between the run-up and run-off of the belt on the pulley. In addition, the greater curvature causes greater bending stresses in the belt, which also limits the transmittable belt force. So-called idler pulleys can be used to increase the wrap angle.

How to Calculate Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley?

Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley calculator uses Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((Wrap Angle on Big Pulley-3.14)/2)) to calculate the Centre Distance between Pulleys, The Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley formula is defined as the distance in between the centers of the small pulley and the big pulley. Centre Distance between Pulleys is denoted by C symbol.

How to calculate Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley using this online calculator? To use this online calculator for Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley, enter Diameter of Big Pulley (D), Diameter of Small Pulley (d) & Wrap Angle on Big Pulley (α_b) and hit the calculate button. Here is how the Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley calculation can be explained with given input values -> 1.5E+6 = (0.81-0.27)/(2*sin((3.490658503988-3.14)/2)).

FAQ

What is Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley?

The Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley formula is defined as the distance in between the centers of the small pulley and the big pulley and is represented as C = (D-d)/(2*sin((α_b-3.14)/2)) or Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((Wrap Angle on Big Pulley-3.14)/2)). Diameter of Big Pulley is the distance from side to side of the flat of the Big pulley, Diameter of Small Pulley is the distance from side to side of the flat of the Small pulley & Wrap Angle on Big Pulley is the angle that the Belt wraps around the Big Pulley.

How to calculate Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley?

The Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley formula is defined as the distance in between the centers of the small pulley and the big pulley is calculated using Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((Wrap Angle on Big Pulley-3.14)/2)). To calculate Center Distance from Small Pulley to Big Pulley given Wrap Angle of Big Pulley, you need Diameter of Big Pulley (D), Diameter of Small Pulley (d) & Wrap Angle on Big Pulley (α_b). With our tool, you need to enter the respective value for Diameter of Big Pulley, Diameter of Small Pulley & Wrap Angle on Big Pulley and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Centre Distance between Pulleys?

In this formula, Centre Distance between Pulleys uses Diameter of Big Pulley, Diameter of Small Pulley & Wrap Angle on Big Pulley. We can use 1 other way(s) to calculate the same, which is/are as follows -

Centre Distance between Pulleys = (Diameter of Big Pulley-Diameter of Small Pulley)/(2*sin((3.14-Wrap Angle on Small Pulley)/2))

Home

FREE PDFs

🔍 Search