Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support Calculator

✖Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure.ⓘ Uniformly Varying Load [q]			+10% -10%
✖Length of Beam is defined as the distance between the supports.ⓘ Length of Beam [l]			+10% -10%
✖Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.ⓘ Elasticity Modulus of Concrete [E]			+10% -10%
✖Area Moment of Inertia is a moment about the centroidal axis without considering mass.ⓘ Area Moment of Inertia [I]			+10% -10%

✖Deflection of Beam Deflection is the movement of a beam or node from its original position. It happens due to the forces and loads being applied to the body.ⓘ Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support [δ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Slope and Deflection Formulas PDF PDF Image

Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support Solution

STEP 0: Pre-Calculation Summary

Formula Used

Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
δ = (0.00651*(q*(l^4))/(E*I))
This formula uses 5 Variables

Variables Used

Deflection of Beam - (Measured in Meter) - Deflection of Beam Deflection is the movement of a beam or node from its original position. It happens due to the forces and loads being applied to the body.
Uniformly Varying Load - (Measured in Newton per Meter) - Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
Elasticity Modulus of Concrete - (Measured in Pascal) - Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.
Area Moment of Inertia - (Measured in Meter⁴) - Area Moment of Inertia is a moment about the centroidal axis without considering mass.

STEP 1: Convert Input(s) to Base Unit

Uniformly Varying Load: 37.5 Kilonewton per Meter --> 37500 Newton per Meter (Check conversion here)
Length of Beam: 5000 Millimeter --> 5 Meter (Check conversion here)
Elasticity Modulus of Concrete: 30000 Megapascal --> 30000000000 Pascal (Check conversion here)
Area Moment of Inertia: 0.0016 Meter⁴ --> 0.0016 Meter⁴ No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

δ = (0.00651*(q*(l^4))/(E*I)) --> (0.00651*(37500*(5^4))/(30000000000*0.0016))

Evaluating ... ...

δ = 0.0031787109375

STEP 3: Convert Result to Output's Unit

0.0031787109375 Meter -->3.1787109375 Millimeter (Check conversion here)

FINAL ANSWER

3.1787109375 ≈ 3.178711 Millimeter <-- Deflection of Beam

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Slope and Deflection » Simply Supported Beam » Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support

Credits

Created by krupa sheela pattapu

Acharya Nagarjuna University College of Engg & Technology (ANU), Guntur

krupa sheela pattapu has created this Calculator and 25+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Simply Supported Beam Calculators

Deflection at Any Point on Simply Supported Beam carrying UDL

LaTeX Go Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))

Deflection at Any Point on Simply Supported carrying Couple Moment at Right End

LaTeX Go Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))

Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support

LaTeX Go Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))

Center Deflection of Simply Supported Beam carrying Couple Moment at Right End

LaTeX Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))

Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support Formula

LaTeX Go

Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
δ = (0.00651*(q*(l^4))/(E*I))

What is Beam Deflection?

The Deformation of A Beam is usually expressed in terms of its deflection from its original unloaded position. The deflection is measured from the original neutral surface of the beam to the neutral surface of the deformed beam. The configuration assumed by the deformed neutral surface is known as the elastic curve of the beam.

What is UVL?

The Uniformly Varying Load (UVL), A UVL is one which is spread over the beam in such a manner that rate of loading varies from each point along the beam, in which load is zero at one end and increase uniformly to the other end.

How to Calculate Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support?

Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support calculator uses Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)) to calculate the Deflection of Beam, The Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support is defined as as displacement, which can occur from externally applied loads i.e., uniformly varying load in this case. Deflection of Beam is denoted by δ symbol.

How to calculate Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support using this online calculator? To use this online calculator for Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support, enter Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I) and hit the calculate button. Here is how the Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support calculation can be explained with given input values -> 3178.711 = (0.00651*(37500*(5^4))/(30000000000*0.0016)).

FAQ

What is Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support?

The Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support is defined as as displacement, which can occur from externally applied loads i.e., uniformly varying load in this case and is represented as δ = (0.00651*(q*(l^4))/(E*I)) or Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)). Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure, Length of Beam is defined as the distance between the supports, Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain & Area Moment of Inertia is a moment about the centroidal axis without considering mass.

How to calculate Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support?

The Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support is defined as as displacement, which can occur from externally applied loads i.e., uniformly varying load in this case is calculated using Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)). To calculate Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support, you need Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I). With our tool, you need to enter the respective value for Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Deflection of Beam?

In this formula, Deflection of Beam uses Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia. We can use 3 other way(s) to calculate the same, which is/are as follows -

Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))
Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))

Home

FREE PDFs

🔍 Search