Cease to Flow Depth given Depth at Gauging Station Calculator

✖Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered.ⓘ Depth at Gauging Station [h_G]			+10% -10%
✖Head at Control shown as a function of discharge Q.ⓘ Head at Control [H_c]			+10% -10%
✖The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.ⓘ Discharge [Q]			+10% -10%
✖Terms of Order give the head loss between the gauging station and the control.ⓘ Terms of Order [Q²]			+10% -10%

✖Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered.ⓘ Cease to Flow Depth given Depth at Gauging Station [h_csf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Streamflow Measurement Formulas PDF PDF Image

Cease to Flow Depth given Depth at Gauging Station Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
h_csf = h_G-H_c*(Q)-Q²^2
This formula uses 5 Variables

Variables Used

Cease-to-Flow Depth - (Measured in Meter) - Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered.
Depth at Gauging Station - (Measured in Meter) - Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered.
Head at Control - (Measured in Meter) - Head at Control shown as a function of discharge Q.
Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Terms of Order - Terms of Order give the head loss between the gauging station and the control.

STEP 1: Convert Input(s) to Base Unit

Depth at Gauging Station: 6.01 Meter --> 6.01 Meter No Conversion Required
Head at Control: 0.05 Meter --> 0.05 Meter No Conversion Required
Discharge: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required
Terms of Order: 2.4 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_csf = h_G-H_c*(Q)-Q²^2 --> 6.01-0.05*(3)-2.4^2

Evaluating ... ...

h_csf = 0.0999999999999996

STEP 3: Convert Result to Output's Unit

0.0999999999999996 Meter --> No Conversion Required

FINAL ANSWER

0.0999999999999996 ≈ 0.1 Meter <-- Cease-to-Flow Depth

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Streamflow Measurement » An Introduction to River Hydraulics » Low Flow » Cease to Flow Depth given Depth at Gauging Station

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Low Flow Calculators

Head at Control given Depth at Gauging Station

LaTeX Go Head at Control = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/(Discharge)

Cease to Flow Depth given Depth at Gauging Station

LaTeX Go Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2

Discharge given Depth at Gauging Station

LaTeX Go Discharge = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/Head at Control

Depth at Gauging Station

LaTeX Go Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2

Cease to Flow Depth given Depth at Gauging Station Formula

LaTeX Go

Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
h_csf = h_G-H_c*(Q)-Q²^2

What is Gauging Station?

A stream gauge, stream gage or gauging station is a location used by hydrologists or environmental scientists to monitor and test terrestrial bodies of water.

How to Calculate Cease to Flow Depth given Depth at Gauging Station?

Cease to Flow Depth given Depth at Gauging Station calculator uses Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2 to calculate the Cease-to-Flow Depth, The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered. Cease-to-Flow Depth is denoted by h_csf symbol.

How to calculate Cease to Flow Depth given Depth at Gauging Station using this online calculator? To use this online calculator for Cease to Flow Depth given Depth at Gauging Station, enter Depth at Gauging Station (h_G), Head at Control (H_c), Discharge (Q) & Terms of Order (Q²) and hit the calculate button. Here is how the Cease to Flow Depth given Depth at Gauging Station calculation can be explained with given input values -> 0.1 = 6.01-0.05*(3)-2.4^2.

FAQ

What is Cease to Flow Depth given Depth at Gauging Station?

The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered and is represented as h_csf = h_G-H_c*(Q)-Q²^2 or Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2. Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered, Head at Control shown as a function of discharge Q, The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material & Terms of Order give the head loss between the gauging station and the control.

How to calculate Cease to Flow Depth given Depth at Gauging Station?

The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered is calculated using Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2. To calculate Cease to Flow Depth given Depth at Gauging Station, you need Depth at Gauging Station (h_G), Head at Control (H_c), Discharge (Q) & Terms of Order (Q²). With our tool, you need to enter the respective value for Depth at Gauging Station, Head at Control, Discharge & Terms of Order and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search