Cease to Flow Depth given Depth at Gauging Station Solution

STEP 0: Pre-Calculation Summary
Formula Used
Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
hcsf = hG-Hc*(Q)-Q2^2
This formula uses 5 Variables
Variables Used
Cease-to-Flow Depth - (Measured in Meter) - Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered.
Depth at Gauging Station - (Measured in Meter) - Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered.
Head at Control - (Measured in Meter) - Head at Control shown as a function of discharge Q.
Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Terms of Order - Terms of Order give the head loss between the gauging station and the control.
STEP 1: Convert Input(s) to Base Unit
Depth at Gauging Station: 6.01 Meter --> 6.01 Meter No Conversion Required
Head at Control: 0.05 Meter --> 0.05 Meter No Conversion Required
Discharge: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required
Terms of Order: 2.4 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
hcsf = hG-Hc*(Q)-Q2^2 --> 6.01-0.05*(3)-2.4^2
Evaluating ... ...
hcsf = 0.0999999999999996
STEP 3: Convert Result to Output's Unit
0.0999999999999996 Meter --> No Conversion Required
FINAL ANSWER
0.0999999999999996 0.1 Meter <-- Cease-to-Flow Depth
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

Low Flow Calculators

Head at Control given Depth at Gauging Station
​ LaTeX ​ Go Head at Control = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/(Discharge)
Cease to Flow Depth given Depth at Gauging Station
​ LaTeX ​ Go Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
Discharge given Depth at Gauging Station
​ LaTeX ​ Go Discharge = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/Head at Control
Depth at Gauging Station
​ LaTeX ​ Go Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2

Cease to Flow Depth given Depth at Gauging Station Formula

​LaTeX ​Go
Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
hcsf = hG-Hc*(Q)-Q2^2

What is Gauging Station?

A stream gauge, stream gage or gauging station is a location used by hydrologists or environmental scientists to monitor and test terrestrial bodies of water.

How to Calculate Cease to Flow Depth given Depth at Gauging Station?

Cease to Flow Depth given Depth at Gauging Station calculator uses Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2 to calculate the Cease-to-Flow Depth, The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered. Cease-to-Flow Depth is denoted by hcsf symbol.

How to calculate Cease to Flow Depth given Depth at Gauging Station using this online calculator? To use this online calculator for Cease to Flow Depth given Depth at Gauging Station, enter Depth at Gauging Station (hG), Head at Control (Hc), Discharge (Q) & Terms of Order (Q2) and hit the calculate button. Here is how the Cease to Flow Depth given Depth at Gauging Station calculation can be explained with given input values -> 0.1 = 6.01-0.05*(3)-2.4^2.

FAQ

What is Cease to Flow Depth given Depth at Gauging Station?
The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered and is represented as hcsf = hG-Hc*(Q)-Q2^2 or Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2. Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered, Head at Control shown as a function of discharge Q, The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material & Terms of Order give the head loss between the gauging station and the control.
How to calculate Cease to Flow Depth given Depth at Gauging Station?
The Cease to Flow Depth given Depth at Gauging Station formula is defined as the parameters of low flow when the hydraulics of a downstream control and a gauging station are considered is calculated using Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2. To calculate Cease to Flow Depth given Depth at Gauging Station, you need Depth at Gauging Station (hG), Head at Control (Hc), Discharge (Q) & Terms of Order (Q2). With our tool, you need to enter the respective value for Depth at Gauging Station, Head at Control, Discharge & Terms of Order and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!