Catchment Area given Peak Discharge for Nonstandard Effective Rainfall Calculator

✖Peak Discharge is the maximum volume flow rate passing a particular location during an event.ⓘ Peak Discharge [Q_p]			+10% -10%
✖Modified Basin Lag for an effective duration rainfall.ⓘ Modified Basin Lag [t'_p]			+10% -10%
✖Regional Constant representing watershed slope and storage effect.ⓘ Regional Constant [C_r]			+10% -10%

✖Area of Catchment is the geographical area from which water flows into a particular point, such as a well, stream, or reservoir.ⓘ Catchment Area given Peak Discharge for Nonstandard Effective Rainfall [A]

⎘ Copy

👎

Formula

✖

Catchment Area given Peak Discharge for Nonstandard Effective Rainfall

Formula

A = Q p \cdot \frac{t' p}{2.78 \cdot C r}

Example

1.365433 km² = 0.891 m³/s \cdot \frac{6.22 h}{2.78 \cdot 1.46}

Calculator

LaTeX

Reset

👍

Download Synder's Synthetic Unit Hydrograph Formulas PDF PDF Image

Catchment Area given Peak Discharge for Nonstandard Effective Rainfall Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant)
A = Q_p*t'_p/(2.78*C_r)
This formula uses 4 Variables

Variables Used

Area of Catchment - (Measured in Square Kilometer) - Area of Catchment is the geographical area from which water flows into a particular point, such as a well, stream, or reservoir.
Peak Discharge - (Measured in Cubic Meter per Second) - Peak Discharge is the maximum volume flow rate passing a particular location during an event.
Modified Basin Lag - (Measured in Hour) - Modified Basin Lag for an effective duration rainfall.
Regional Constant - Regional Constant representing watershed slope and storage effect.

STEP 1: Convert Input(s) to Base Unit

Peak Discharge: 0.891 Cubic Meter per Second --> 0.891 Cubic Meter per Second No Conversion Required
Modified Basin Lag: 6.22 Hour --> 6.22 Hour No Conversion Required
Regional Constant: 1.46 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = Q_p*t'_p/(2.78*C_r) --> 0.891*6.22/(2.78*1.46)

Evaluating ... ...

A = 1.3654331329457

STEP 3: Convert Result to Output's Unit

1365433.1329457 Square Meter -->1.3654331329457 Square Kilometer (Check conversion here)

FINAL ANSWER

1.3654331329457 ≈ 1.365433 Square Kilometer <-- Area of Catchment

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Hydrographs » Synthetic Unit Hydrograph » Synder's Synthetic Unit Hydrograph » Catchment Area given Peak Discharge for Nonstandard Effective Rainfall

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Synder's Synthetic Unit Hydrograph Calculators

Regional Constant given Peak Discharge for Nonstandard Effective Rainfall

Go Regional Constant (Snyder) = Peak Discharge*Modified Basin Lag/(2.78*Area of Catchment)

Peak Discharge for Nonstandard Effective Rainfall

Go Peak Discharge = 2.78*Regional Constant (Snyder)*Area of Catchment/Modified Basin Lag

Catchment Area given Peak Discharge for Nonstandard Effective Rainfall

Go Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant)

Modified Basin Lag given Peak Discharge for Nonstandard Effective Rainfall

Go Modified Basin Lag = 2.78*Regional Constant*Area of Catchment/Peak Discharge

Catchment Area given Peak Discharge for Nonstandard Effective Rainfall Formula

Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant)
A = Q_p*t'_p/(2.78*C_r)

What is Lag Time in hydrology?

The Lag time is the delay between the maximum rainfall amount and the peak discharge. The shape of a hydrograph varies in each river basin and each storm event. This increases lag time. The peak discharge is also lower as it takes water longer to reach the river channel.

What is the Catchment Area of a river?

A water catchment (commonly referred to as a “watershed”) is an area of land where all water flows to a single stream, river, lake or even ocean. Natural boundaries of water catchments can be very small for a single creek or stream or quite large—the Colorado River basin for example.

How to Calculate Catchment Area given Peak Discharge for Nonstandard Effective Rainfall?

Catchment Area given Peak Discharge for Nonstandard Effective Rainfall calculator uses Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant) to calculate the Area of Catchment, The Catchment Area given Peak Discharge for Nonstandard Effective Rainfall formula is defined as the area of land where all of the precipitation that falls, less the water lost to evaporation and deep aquifer recharge, eventually flows to a single outlet. Area of Catchment is denoted by A symbol.

How to calculate Catchment Area given Peak Discharge for Nonstandard Effective Rainfall using this online calculator? To use this online calculator for Catchment Area given Peak Discharge for Nonstandard Effective Rainfall, enter Peak Discharge (Q_p), Modified Basin Lag (t'_p) & Regional Constant (C_r) and hit the calculate button. Here is how the Catchment Area given Peak Discharge for Nonstandard Effective Rainfall calculation can be explained with given input values -> 1.4E-6 = 0.891*22392/(2.78*1.46).

FAQ

What is Catchment Area given Peak Discharge for Nonstandard Effective Rainfall?

The Catchment Area given Peak Discharge for Nonstandard Effective Rainfall formula is defined as the area of land where all of the precipitation that falls, less the water lost to evaporation and deep aquifer recharge, eventually flows to a single outlet and is represented as A = Q_p*t'_p/(2.78*C_r) or Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant). Peak Discharge is the maximum volume flow rate passing a particular location during an event, Modified Basin Lag for an effective duration rainfall & Regional Constant representing watershed slope and storage effect.

How to calculate Catchment Area given Peak Discharge for Nonstandard Effective Rainfall?

The Catchment Area given Peak Discharge for Nonstandard Effective Rainfall formula is defined as the area of land where all of the precipitation that falls, less the water lost to evaporation and deep aquifer recharge, eventually flows to a single outlet is calculated using Area of Catchment = Peak Discharge*Modified Basin Lag/(2.78*Regional Constant). To calculate Catchment Area given Peak Discharge for Nonstandard Effective Rainfall, you need Peak Discharge (Q_p), Modified Basin Lag (t'_p) & Regional Constant (C_r). With our tool, you need to enter the respective value for Peak Discharge, Modified Basin Lag & Regional Constant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Area of Catchment?

In this formula, Area of Catchment uses Peak Discharge, Modified Basin Lag & Regional Constant. We can use 1 other way(s) to calculate the same, which is/are as follows -

Area of Catchment = Peak Discharge*Basin Lag/(2.78*Regional Constant (Snyder))

Home

FREE PDFs

🔍 Search