Capillarity through Parallel Plates Calculator

✖Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.ⓘ Surface Tension [σ]			+10% -10%
✖Theta is the angle of contact between liquid and the boundary of capillary tube.ⓘ Theta [θ]			+10% -10%
✖Specific Weight is defined as weight per unit volume. It is the specific weight of the liquid for which the calculation is being done.ⓘ Specific Weight [γ]			+10% -10%
✖Uniform Gap between Vertical Plates is the uniform gap between the two vertical plates that are partially immersed in a fluid.ⓘ Uniform Gap between Vertical Plates [t]			+10% -10%

✖Capillarity height is denoted by the symbol h.ⓘ Capillarity through Parallel Plates [h_capillarity]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Capillarity through Parallel Plates Solution

STEP 0: Pre-Calculation Summary

Formula Used

Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates)
h_capillarity = (2*σ*cos(θ))/(γ*t)
This formula uses 1 Functions, 5 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Capillarity Height - (Measured in Meter) - Capillarity height is denoted by the symbol h.
Surface Tension - (Measured in Newton per Meter) - Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Theta - (Measured in Radian) - Theta is the angle of contact between liquid and the boundary of capillary tube.
Specific Weight - (Measured in Newton per Cubic Meter) - Specific Weight is defined as weight per unit volume. It is the specific weight of the liquid for which the calculation is being done.
Uniform Gap between Vertical Plates - (Measured in Meter) - Uniform Gap between Vertical Plates is the uniform gap between the two vertical plates that are partially immersed in a fluid.

STEP 1: Convert Input(s) to Base Unit

Surface Tension: 72.75 Newton per Meter --> 72.75 Newton per Meter No Conversion Required
Theta: 8 Degree --> 0.13962634015952 Radian (Check conversion here)
Specific Weight: 112 Newton per Cubic Meter --> 112 Newton per Cubic Meter No Conversion Required
Uniform Gap between Vertical Plates: 16 Millimeter --> 0.016 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_capillarity = (2*σ*cos(θ))/(γ*t) --> (2*72.75*cos(0.13962634015952))/(112*0.016)

Evaluating ... ...

h_capillarity = 80.4040200903454

STEP 3: Convert Result to Output's Unit

80.4040200903454 Meter -->80404.0200903454 Millimeter (Check conversion here)

FINAL ANSWER

80404.0200903454 ≈ 80404.02 Millimeter <-- Capillarity Height

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Liquid Properties Measuring Equipments » Capillarity through Parallel Plates

Credits

Created by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has created this Calculator and 600+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Liquid Properties Measuring Equipments Calculators

Capillarity through Circular Tube Inserted in Liquid of S1 above Liquid of S2

LaTeX Go Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific weight of liquid*Radius Of Circular Tube*(Specific Gravity of Liquid 1-Specific Gravity of Liquid 2))

Height of liquid in tube

LaTeX Go Height of Liquid in Tube = (4*Surface Tension*cos(Theta))/(Density of Liquid*Acceleration Due To Gravity*Diameter of Tube)

Capillarity through Annular Space

LaTeX Go Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*(Outer Radius Of Tube-Inner Radius Of Tube))

Capillarity through Parallel Plates

LaTeX Go Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates)

Capillarity through Parallel Plates Formula

LaTeX Go

Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates)
h_capillarity = (2*σ*cos(θ))/(γ*t)

What is capillarity?

Capillary rise or capillarity is a phenomenon in which liquid spontaneously rises or falls in a narrow space such as a thin tube or in the voids of a porous material. Surface tension is an important factor in the phenomenon of capillarity. The surface adhesion forces or internal cohesion present at the interface between a liquid and a solid stretch the liquid and form a curved surface called a meniscus. The characteristic height is the distance from the bottom of the meniscus to the base and exists when the Laplace pressure and the pressure due to gravity are balanced.

How to Calculate Capillarity through Parallel Plates?

Capillarity through Parallel Plates calculator uses Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates) to calculate the Capillarity Height, Capillarity through Parallel Plates is the height raised by the liquid in parallel plates. Capillarity Height is denoted by h_capillarity symbol.

How to calculate Capillarity through Parallel Plates using this online calculator? To use this online calculator for Capillarity through Parallel Plates, enter Surface Tension (σ), Theta (θ), Specific Weight (γ) & Uniform Gap between Vertical Plates (t) and hit the calculate button. Here is how the Capillarity through Parallel Plates calculation can be explained with given input values -> 8E+7 = (2*72.75*cos(0.13962634015952))/(112*0.016).

FAQ

What is Capillarity through Parallel Plates?

Capillarity through Parallel Plates is the height raised by the liquid in parallel plates and is represented as h_capillarity = (2*σ*cos(θ))/(γ*t) or Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates). Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side, Theta is the angle of contact between liquid and the boundary of capillary tube, Specific Weight is defined as weight per unit volume. It is the specific weight of the liquid for which the calculation is being done & Uniform Gap between Vertical Plates is the uniform gap between the two vertical plates that are partially immersed in a fluid.

How to calculate Capillarity through Parallel Plates?

Capillarity through Parallel Plates is the height raised by the liquid in parallel plates is calculated using Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*Uniform Gap between Vertical Plates). To calculate Capillarity through Parallel Plates, you need Surface Tension (σ), Theta (θ), Specific Weight (γ) & Uniform Gap between Vertical Plates (t). With our tool, you need to enter the respective value for Surface Tension, Theta, Specific Weight & Uniform Gap between Vertical Plates and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Capillarity Height?

In this formula, Capillarity Height uses Surface Tension, Theta, Specific Weight & Uniform Gap between Vertical Plates. We can use 3 other way(s) to calculate the same, which is/are as follows -

Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific Weight*(Outer Radius Of Tube-Inner Radius Of Tube))
Capillarity Height = (2*Surface Tension*cos(Theta))/(Specific weight of liquid*Radius Of Circular Tube*(Specific Gravity of Liquid 1-Specific Gravity of Liquid 2))
Capillarity Height = (4*Surface Tension*cos(Theta))/(Specific Weight*Diameter of Tube)

Home

FREE PDFs

🔍 Search