Capacitive Voltage in Nominal T Method Calculator

✖Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.ⓘ Receiving End Voltage in T [V_r(t)]			+10% -10%
✖Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.ⓘ Receiving End Current in T [I_r(t)]			+10% -10%
✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in T [Z_t]			+10% -10%

✖Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.ⓘ Capacitive Voltage in Nominal T Method [V_c(t)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

Capacitive Voltage in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)
V_c(t) = V_r(t)+(I_r(t)*Z_t/2)
This formula uses 4 Variables

Variables Used

Capacitive Voltage in T - (Measured in Volt) - Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.
Receiving End Voltage in T - (Measured in Volt) - Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.
Receiving End Current in T - (Measured in Ampere) - Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.
Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

Receiving End Voltage in T: 320.2 Volt --> 320.2 Volt No Conversion Required
Receiving End Current in T: 14.72 Ampere --> 14.72 Ampere No Conversion Required
Impedance in T: 9.07 Ohm --> 9.07 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_c(t) = V_r(t)+(I_r(t)*Z_t/2) --> 320.2+(14.72*9.07/2)

Evaluating ... ...

V_c(t) = 386.9552

STEP 3: Convert Result to Output's Unit

386.9552 Volt --> No Conversion Required

FINAL ANSWER

386.9552 Volt <-- Capacitive Voltage in T

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » Capacitive Voltage in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

Capacitive Voltage in Nominal T Method Formula

LaTeX Go

Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)
V_c(t) = V_r(t)+(I_r(t)*Z_t/2)

What is capacitor voltage?

The voltage rating of a capacitor is a measure of how strong its insulation is. A 35V cap can withstand at least 35 volts applied across it (a higher voltage may cause bad things like a short through the cap and burnup).

How to Calculate Capacitive Voltage in Nominal T Method?

Capacitive Voltage in Nominal T Method calculator uses Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2) to calculate the Capacitive Voltage in T, The Capacitive Voltage in Nominal T method formula is defined as the voltage rating on a capacitor is the maximum amount of voltage that a capacitor can safely be exposed to and can store. Capacitive Voltage in T is denoted by V_c(t) symbol.

How to calculate Capacitive Voltage in Nominal T Method using this online calculator? To use this online calculator for Capacitive Voltage in Nominal T Method, enter Receiving End Voltage in T (V_r(t)), Receiving End Current in T (I_r(t)) & Impedance in T (Z_t) and hit the calculate button. Here is how the Capacitive Voltage in Nominal T Method calculation can be explained with given input values -> 387.912 = 320.2+(14.72*9.07/2).

FAQ

What is Capacitive Voltage in Nominal T Method?

The Capacitive Voltage in Nominal T method formula is defined as the voltage rating on a capacitor is the maximum amount of voltage that a capacitor can safely be exposed to and can store and is represented as V_c(t) = V_r(t)+(I_r(t)*Z_t/2) or Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2). Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line, Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line & Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate Capacitive Voltage in Nominal T Method?

The Capacitive Voltage in Nominal T method formula is defined as the voltage rating on a capacitor is the maximum amount of voltage that a capacitor can safely be exposed to and can store is calculated using Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2). To calculate Capacitive Voltage in Nominal T Method, you need Receiving End Voltage in T (V_r(t)), Receiving End Current in T (I_r(t)) & Impedance in T (Z_t). With our tool, you need to enter the respective value for Receiving End Voltage in T, Receiving End Current in T & Impedance in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Capacitive Voltage in T?

In this formula, Capacitive Voltage in T uses Receiving End Voltage in T, Receiving End Current in T & Impedance in T. We can use 1 other way(s) to calculate the same, which is/are as follows -

Capacitive Voltage in T = Sending End Voltage in T-((Sending End Current in T*Impedance in T)/2)

Home

FREE PDFs

🔍 Search