Capacity of Crankcase when Quantity of Oil is Determined Calculator

✖The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.ⓘ Time between Change of Oil [t]			+10% -10%
✖Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.ⓘ Quantity of Oil [Q]			+10% -10%
✖Engine power is the power that the engine can put out.ⓘ Engine power [HP]			+10% -10%
✖Operating Factor is the ratio of time worked to reference time.ⓘ Operating Factor [η]			+10% -10%

✖Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.ⓘ Capacity of Crankcase when Quantity of Oil is Determined [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Construction Management Formulas PDF PDF Image

Capacity of Crankcase when Quantity of Oil is Determined Solution

STEP 0: Pre-Calculation Summary

Formula Used

Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74))
C = 5*t*(Q-(HP*η*0.0027/0.74))
This formula uses 5 Variables

Variables Used

Crankcase Capacity - (Measured in Liter) - Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.
Time between Change of Oil - (Measured in Hour) - The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.
Quantity of Oil - (Measured in Liter per hour) - Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.
Engine power - (Measured in Horsepower) - Engine power is the power that the engine can put out.
Operating Factor - Operating Factor is the ratio of time worked to reference time.

STEP 1: Convert Input(s) to Base Unit

Time between Change of Oil: 100 Hour --> 100 Hour No Conversion Required
Quantity of Oil: 0.41 Liter per hour --> 0.41 Liter per hour No Conversion Required
Engine power: 160 Horsepower --> 160 Horsepower No Conversion Required
Operating Factor: 0.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = 5*t*(Q-(HP*η*0.0027/0.74)) --> 5*100*(0.41-(160*0.6*0.0027/0.74))

Evaluating ... ...

C = 29.8648648648649

STEP 3: Convert Result to Output's Unit

0.0298648648648649 Cubic Meter -->29.8648648648649 Liter (Check conversion here)

FINAL ANSWER

29.8648648648649 ≈ 29.86486 Liter <-- Crankcase Capacity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Construction Practice, Planning and Management » Construction Management » Management of Construction Equipment » Capacity of Crankcase when Quantity of Oil is Determined

Credits

Created by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Management of Construction Equipment Calculators

Average Investment when Salvage value is 0

LaTeX Go Average Investment = ((1+Useful Life)/(2*Useful Life))*Capital Cost

Book Value for New Machine

LaTeX Go Book Value = (Hourly Depreciation*Life Span)/0.9

Life Span of Machine

LaTeX Go Life Span = 0.9*Book Value/Hourly Depreciation

Hourly Depreciation

LaTeX Go Hourly Depreciation = 0.9*Book Value/Life Span

Capacity of Crankcase when Quantity of Oil is Determined Formula

LaTeX Go

Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74))
C = 5*t*(Q-(HP*η*0.0027/0.74))

What are the factors affecting the Cost of Owning and Operating the Construction Equipment?

The different major costs contributing to the cost of owning and operating construction equipment are as follows:
1. Depreciation Cost
2. Investment Cost
3. Maintenance and Repair Cost
4. Operation Costs
a. Repair charges
b. Depreciation on tyres and tubes
c. Labour charges
d. Fuel charges
e. Operation and maintenance crew charges
f. Miscellaneous supplies
5. Downtime Cost
6. Obsolescence Cost
7. Replacement Cost

How to Calculate Capacity of Crankcase when Quantity of Oil is Determined?

Capacity of Crankcase when Quantity of Oil is Determined calculator uses Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)) to calculate the Crankcase Capacity, The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine. Crankcase Capacity is denoted by C symbol.

How to calculate Capacity of Crankcase when Quantity of Oil is Determined using this online calculator? To use this online calculator for Capacity of Crankcase when Quantity of Oil is Determined, enter Time between Change of Oil (t), Quantity of Oil (Q), Engine power (HP) & Operating Factor (η) and hit the calculate button. Here is how the Capacity of Crankcase when Quantity of Oil is Determined calculation can be explained with given input values -> 29864.86 = 5*360000*(1.13888888888889E-07-(119311.97952*0.6*0.0027/0.74)).

FAQ

What is Capacity of Crankcase when Quantity of Oil is Determined?

The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine and is represented as C = 5*t*(Q-(HP*η*0.0027/0.74)) or Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)). The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil, Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines, Engine power is the power that the engine can put out & Operating Factor is the ratio of time worked to reference time.

How to calculate Capacity of Crankcase when Quantity of Oil is Determined?

The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine is calculated using Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)). To calculate Capacity of Crankcase when Quantity of Oil is Determined, you need Time between Change of Oil (t), Quantity of Oil (Q), Engine power (HP) & Operating Factor (η). With our tool, you need to enter the respective value for Time between Change of Oil, Quantity of Oil, Engine power & Operating Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search