Camber Change Rate Calculator

✖Front View Swing Arm is the distance from the front wheel's center to the point where the swing arm is attached to the vehicle's frame.ⓘ Front View Swing Arm [fvsa]

+10%

-10%

✖Camber Change Rate is the rate of change in the camber angle of a wheel in an independent suspension system, affecting vehicle stability and handling.ⓘ Camber Change Rate [θ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Anti Geometry of Independent Suspension Formulas PDF PDF Image

Camber Change Rate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Camber Change Rate = atan(1/Front View Swing Arm)
θ = atan(1/fvsa)
This formula uses 2 Functions, 2 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
atan - Inverse tan is used to calculate the angle by applying the tangent ratio of the angle, which is the opposite side divided by the adjacent side of the right triangle., atan(Number)

Variables Used

Camber Change Rate - (Measured in Radian) - Camber Change Rate is the rate of change in the camber angle of a wheel in an independent suspension system, affecting vehicle stability and handling.
Front View Swing Arm - (Measured in Meter) - Front View Swing Arm is the distance from the front wheel's center to the point where the swing arm is attached to the vehicle's frame.

STEP 1: Convert Input(s) to Base Unit

Front View Swing Arm: 1332 Millimeter --> 1.332 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

θ = atan(1/fvsa) --> atan(1/1.332)

Evaluating ... ...

θ = 0.643981416153083

STEP 3: Convert Result to Output's Unit

0.643981416153083 Radian -->36.8974172304365 Degree (Check conversion here)

FINAL ANSWER

36.8974172304365 ≈ 36.89742 Degree <-- Camber Change Rate

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Automobile » Suspension Geometry » Mechanical » Anti Geometry of Independent Suspension » Camber Change Rate

Credits

Created by Syed Adnan

Ramaiah University of Applied Sciences (RUAS), bangalore

Syed Adnan has created this Calculator and 200+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Anti Geometry of Independent Suspension Calculators

Wheelbase of Vehicle from Percentage Anti Dive

LaTeX Go Independent Wheelbase of Vehicle = Percentage Anti Dive Front/((Percentage Front Braking)*(Side View Swing Arm Height/Side View Swing Arm Length)/(Height of CG above Road))

Height of Centre of Gravity from Road Surface from Percentage Anti Dive

LaTeX Go Height of CG above Road = ((Percentage Front Braking)*(Side View Swing Arm Height/Side View Swing Arm Length)*Independent Wheelbase of Vehicle)/Percentage Anti Dive Front

Percentage Front Braking given Percentage Anti Dive

LaTeX Go Percentage Front Braking = Percentage Anti Dive Front/((Side View Swing Arm Height/Side View Swing Arm Length)/(Height of CG above Road/Independent Wheelbase of Vehicle))

Percentage Anti Dive on Front

LaTeX Go Percentage Anti Dive Front = (Percentage Front Braking)*(Side View Swing Arm Height/Side View Swing Arm Length)/(Height of CG above Road/Independent Wheelbase of Vehicle)

Camber Change Rate Formula

LaTeX Go

Camber Change Rate = atan(1/Front View Swing Arm)
θ = atan(1/fvsa)

What is Camber Change Rate?

Camber gain is the change in camber angle per amount of vertical displacement of the wheel. The most common situation is that camber will become more negative if the wheel is moved vertically upwards. Likewise, the wheel camber will become more positive if the wheel is moved vertically downwards. Camber gain is a useful tool especially within motorsport. During cornering, there is a lateral load transfer across the car. This causes the car to roll and would cause a car with zero static camber to roll off the contact patch and reduce cornering grip.

How to Calculate Camber Change Rate?

Camber Change Rate calculator uses Camber Change Rate = atan(1/Front View Swing Arm) to calculate the Camber Change Rate, Camber Change Rate formula is defined as a measure of the rate of change in camber angle, which is the angle between the vertical plane of a wheel and the vertical plane of the vehicle, providing insight into the vehicle's stability and handling performance. Camber Change Rate is denoted by θ symbol.

How to calculate Camber Change Rate using this online calculator? To use this online calculator for Camber Change Rate, enter Front View Swing Arm (fvsa) and hit the calculate button. Here is how the Camber Change Rate calculation can be explained with given input values -> 1522.065 = atan(1/1.332).

FAQ

What is Camber Change Rate?

Camber Change Rate formula is defined as a measure of the rate of change in camber angle, which is the angle between the vertical plane of a wheel and the vertical plane of the vehicle, providing insight into the vehicle's stability and handling performance and is represented as θ = atan(1/fvsa) or Camber Change Rate = atan(1/Front View Swing Arm). Front View Swing Arm is the distance from the front wheel's center to the point where the swing arm is attached to the vehicle's frame.

How to calculate Camber Change Rate?

Camber Change Rate formula is defined as a measure of the rate of change in camber angle, which is the angle between the vertical plane of a wheel and the vertical plane of the vehicle, providing insight into the vehicle's stability and handling performance is calculated using Camber Change Rate = atan(1/Front View Swing Arm). To calculate Camber Change Rate, you need Front View Swing Arm (fvsa). With our tool, you need to enter the respective value for Front View Swing Arm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search