Breaker Depth Index Calculator

✖Wave Height at Incipient Breaking refers to the height of the wave at the point where it starts breaking, often referred to as the breaker point.ⓘ Wave Height at Incipient Breaking [H_b]			+10% -10%
✖Water Depth at Breaking is the depth of water where ocean surface waves start to break as they approach the shore which depends on the wave climate and is therefore highly variable.ⓘ Water Depth at Breaking [d_b]			+10% -10%

✖Breaker Depth Index is the ratio of the wave height at breaking, to the water depth, at the breakpoint.ⓘ Breaker Depth Index [γ_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Breaker Index Formulas PDF PDF Image

Breaker Depth Index Solution

STEP 0: Pre-Calculation Summary

Formula Used

Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking
γ_b = H_b/d_b
This formula uses 3 Variables

Variables Used

Breaker Depth Index - Breaker Depth Index is the ratio of the wave height at breaking, to the water depth, at the breakpoint.
Wave Height at Incipient Breaking - (Measured in Meter) - Wave Height at Incipient Breaking refers to the height of the wave at the point where it starts breaking, often referred to as the breaker point.
Water Depth at Breaking - (Measured in Meter) - Water Depth at Breaking is the depth of water where ocean surface waves start to break as they approach the shore which depends on the wave climate and is therefore highly variable.

STEP 1: Convert Input(s) to Base Unit

Wave Height at Incipient Breaking: 18 Meter --> 18 Meter No Conversion Required
Water Depth at Breaking: 55 Meter --> 55 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_b = H_b/d_b --> 18/55

Evaluating ... ...

γ_b = 0.327272727272727

STEP 3: Convert Result to Output's Unit

0.327272727272727 --> No Conversion Required

FINAL ANSWER

0.327272727272727 ≈ 0.327273 <-- Breaker Depth Index

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Surf Zone Waves » Breaker Index » Breaker Depth Index

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Breaker Index Calculators

Water Depth at Breaking given Breaker Depth Index

LaTeX Go Water Depth at Breaking = (Wave Height at Incipient Breaking/Breaker Depth Index)

Wave Height at Incipient Breaking given Breaker Depth Index

LaTeX Go Wave Height at Incipient Breaking = Breaker Depth Index*Water Depth at Breaking

Breaker Depth Index

LaTeX Go Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking

Breaker Height Index

LaTeX Go Breaker Height Index = Wave Height at Incipient Breaking/Deep-Water Wavelength

Breaker Depth Index Formula

LaTeX Go

Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking
γ_b = H_b/d_b

What is Wave Period?

The Wave Period is the time it takes to complete one cycle. The standard unit of a wave period is in seconds, and it is inversely proportional to the frequency of a wave, which is the number of cycles of waves that occur in one second. In other words, the higher the frequency of a wave, the lower the wave period.

What is Breaker Index?

The Breaker Index is defined as the ratio between the height of a wave and the water depth in which the wave breaks or the ratio of wave height and still water depth at the shoreface location where waves start breaking.

How to Calculate Breaker Depth Index?

Breaker Depth Index calculator uses Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking to calculate the Breaker Depth Index, The Breaker Depth Index formula is defined as the ratio of the wave height at breaking, to the water depth at the breakpoint used to estimate the location on the shoreface where wave breaking occurs based on empirical formulas. Breaker Depth Index is denoted by γ_b symbol.

How to calculate Breaker Depth Index using this online calculator? To use this online calculator for Breaker Depth Index, enter Wave Height at Incipient Breaking (H_b) & Water Depth at Breaking (d_b) and hit the calculate button. Here is how the Breaker Depth Index calculation can be explained with given input values -> 0.327273 = 18/55.

FAQ

What is Breaker Depth Index?

The Breaker Depth Index formula is defined as the ratio of the wave height at breaking, to the water depth at the breakpoint used to estimate the location on the shoreface where wave breaking occurs based on empirical formulas and is represented as γ_b = H_b/d_b or Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking. Wave Height at Incipient Breaking refers to the height of the wave at the point where it starts breaking, often referred to as the breaker point & Water Depth at Breaking is the depth of water where ocean surface waves start to break as they approach the shore which depends on the wave climate and is therefore highly variable.

How to calculate Breaker Depth Index?

The Breaker Depth Index formula is defined as the ratio of the wave height at breaking, to the water depth at the breakpoint used to estimate the location on the shoreface where wave breaking occurs based on empirical formulas is calculated using Breaker Depth Index = Wave Height at Incipient Breaking/Water Depth at Breaking. To calculate Breaker Depth Index, you need Wave Height at Incipient Breaking (H_b) & Water Depth at Breaking (d_b). With our tool, you need to enter the respective value for Wave Height at Incipient Breaking & Water Depth at Breaking and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Breaker Depth Index?

In this formula, Breaker Depth Index uses Wave Height at Incipient Breaking & Water Depth at Breaking. We can use 1 other way(s) to calculate the same, which is/are as follows -

Breaker Depth Index = Functions of Beach Slope B-Functions of Beach Slope A*(Wave Height at Incipient Breaking/([g]*Wave Period for Breaker Index^2))

Home

FREE PDFs

🔍 Search