Biot Number given Characteristic Dimension and Fourier Number Calculator

✖The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place.ⓘ Heat Transfer Coefficient [h]			+10% -10%
✖Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature.ⓘ Time Constant [𝜏]			+10% -10%
✖Density of Body is the physical quantity that expresses the relationship between its mass and its volume.ⓘ Density of Body [ρ_B]			+10% -10%
✖Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.ⓘ Specific Heat Capacity [c]			+10% -10%
✖Characteristic Dimension is the ratio of volume and the area.ⓘ Characteristic Dimension [s]			+10% -10%
✖Fourier Number is the ratio of diffusive or conductive transport rate to the quantity storage rate, where the quantity may be either heat or matter.ⓘ Fourier Number [F_o]			+10% -10%

✖Biot Number is a dimensionless quantity having the ratio of internal conduction resistance to the surface convection resistance.ⓘ Biot Number given Characteristic Dimension and Fourier Number [Bi]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unsteady State Heat Conduction Formulas PDF PDF Image

Biot Number given Characteristic Dimension and Fourier Number Solution

STEP 0: Pre-Calculation Summary

Formula Used

Biot Number = (Heat Transfer Coefficient*Time Constant)/(Density of Body*Specific Heat Capacity*Characteristic Dimension*Fourier Number)
Bi = (h*𝜏)/(ρ_B*c*s*F_o)
This formula uses 7 Variables

Variables Used

Biot Number - Biot Number is a dimensionless quantity having the ratio of internal conduction resistance to the surface convection resistance.
Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place.
Time Constant - (Measured in Second) - Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature.
Density of Body - (Measured in Kilogram per Cubic Meter) - Density of Body is the physical quantity that expresses the relationship between its mass and its volume.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Characteristic Dimension - (Measured in Meter) - Characteristic Dimension is the ratio of volume and the area.
Fourier Number - Fourier Number is the ratio of diffusive or conductive transport rate to the quantity storage rate, where the quantity may be either heat or matter.

STEP 1: Convert Input(s) to Base Unit

Heat Transfer Coefficient: 10 Watt per Square Meter per Kelvin --> 10 Watt per Square Meter per Kelvin No Conversion Required
Time Constant: 1937 Second --> 1937 Second No Conversion Required
Density of Body: 15 Kilogram per Cubic Meter --> 15 Kilogram per Cubic Meter No Conversion Required
Specific Heat Capacity: 1.5 Joule per Kilogram per K --> 1.5 Joule per Kilogram per K No Conversion Required
Characteristic Dimension: 6.9 Meter --> 6.9 Meter No Conversion Required
Fourier Number: 1.134 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Bi = (h*𝜏)/(ρ_B*c*s*F_o) --> (10*1937)/(15*1.5*6.9*1.134)

Evaluating ... ...

Bi = 110.023373576782

STEP 3: Convert Result to Output's Unit

110.023373576782 --> No Conversion Required

FINAL ANSWER

110.023373576782 ≈ 110.0234 <-- Biot Number

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Unsteady State Heat Conduction » Biot Number given Characteristic Dimension and Fourier Number

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Unsteady State Heat Conduction Calculators

Fourier Number using Biot Number

LaTeX Go Fourier Number = (-1/(Biot Number))*ln((Temperature at Any Time T-Temperature of Bulk Fluid)/(Initial Temperature of Object-Temperature of Bulk Fluid))

Biot Number using Fourier Number

LaTeX Go Biot Number = (-1/Fourier Number)*ln((Temperature at Any Time T-Temperature of Bulk Fluid)/(Initial Temperature of Object-Temperature of Bulk Fluid))

Initial Internal Energy Content of Body in Reference to Environment Temperature

LaTeX Go Initial Energy Content = Density of Body*Specific Heat Capacity*Volume of Object*(Initial Temperature of Solid-Ambient Temperature)

Biot Number using Heat Transfer Coefficient

LaTeX Go Biot Number = (Heat Transfer Coefficient*Thickness of Wall)/Thermal Conductivity

Biot Number given Characteristic Dimension and Fourier Number Formula

LaTeX Go

Biot Number = (Heat Transfer Coefficient*Time Constant)/(Density of Body*Specific Heat Capacity*Characteristic Dimension*Fourier Number)
Bi = (h*𝜏)/(ρ_B*c*s*F_o)

What is Unsteady State Heat Transfer?

Unsteady State Heat Transfer refers to the heat transfer process in which a system's temperature changes with time. This type of heat transfer can happen in different forms, such as conduction, convection, and radiation. It occurs in various systems, including solid materials, fluids, and gases. The heat transfer rate in an unsteady state is directly proportional to the rate of temperature change. This means that the heat transfer rate is not constant and can vary over time. It's an important aspect in the design and optimization of thermal systems, and understanding this process is crucial in many research areas, such as combustion, electronics, and aerospace.

What are Dimensionless Number?

Dimensionless numbers or non-dimensional numbers are those which are useful to determine the flow characteristics of a fluid. Inertia force always exists if there is any mass in motion. Dividing this inertia force with other forces like viscous force, gravity force, surface tension, elastic force, or pressure force, gives us the dimensionless numbers.

How to Calculate Biot Number given Characteristic Dimension and Fourier Number?

Biot Number given Characteristic Dimension and Fourier Number calculator uses Biot Number = (Heat Transfer Coefficient*Time Constant)/(Density of Body*Specific Heat Capacity*Characteristic Dimension*Fourier Number) to calculate the Biot Number, The Biot Number given Characteristic Dimension and Fourier Number formula is defined as the function of heat transfer coefficient, time constant, density of body, specific heat capacity, characteristic dimension and fourier number. The exponential part of Lumped Heat capacity equation can also be expressed as the the product of Biot number and fourier number. Biot Number is denoted by Bi symbol.

How to calculate Biot Number given Characteristic Dimension and Fourier Number using this online calculator? To use this online calculator for Biot Number given Characteristic Dimension and Fourier Number, enter Heat Transfer Coefficient (h), Time Constant (𝜏), Density of Body (ρ_B), Specific Heat Capacity (c), Characteristic Dimension (s) & Fourier Number (F_o) and hit the calculate button. Here is how the Biot Number given Characteristic Dimension and Fourier Number calculation can be explained with given input values -> 110.0234 = (10*1937)/(15*1.5*6.9*1.134).

FAQ

What is Biot Number given Characteristic Dimension and Fourier Number?

The Biot Number given Characteristic Dimension and Fourier Number formula is defined as the function of heat transfer coefficient, time constant, density of body, specific heat capacity, characteristic dimension and fourier number. The exponential part of Lumped Heat capacity equation can also be expressed as the the product of Biot number and fourier number and is represented as Bi = (h*𝜏)/(ρ_B*c*s*F_o) or Biot Number = (Heat Transfer Coefficient*Time Constant)/(Density of Body*Specific Heat Capacity*Characteristic Dimension*Fourier Number). The Heat Transfer Coefficient is the heat transferred per unit area per kelvin. Thus area is included in the equation as it represents the area over which the transfer of heat takes place, Time Constant is defined as the total time taken for a body to attain final temperature from initial temperature, Density of Body is the physical quantity that expresses the relationship between its mass and its volume, Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount, Characteristic Dimension is the ratio of volume and the area & Fourier Number is the ratio of diffusive or conductive transport rate to the quantity storage rate, where the quantity may be either heat or matter.

How to calculate Biot Number given Characteristic Dimension and Fourier Number?

The Biot Number given Characteristic Dimension and Fourier Number formula is defined as the function of heat transfer coefficient, time constant, density of body, specific heat capacity, characteristic dimension and fourier number. The exponential part of Lumped Heat capacity equation can also be expressed as the the product of Biot number and fourier number is calculated using Biot Number = (Heat Transfer Coefficient*Time Constant)/(Density of Body*Specific Heat Capacity*Characteristic Dimension*Fourier Number). To calculate Biot Number given Characteristic Dimension and Fourier Number, you need Heat Transfer Coefficient (h), Time Constant (𝜏), Density of Body (ρ_B), Specific Heat Capacity (c), Characteristic Dimension (s) & Fourier Number (F_o). With our tool, you need to enter the respective value for Heat Transfer Coefficient, Time Constant, Density of Body, Specific Heat Capacity, Characteristic Dimension & Fourier Number and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Biot Number?

In this formula, Biot Number uses Heat Transfer Coefficient, Time Constant, Density of Body, Specific Heat Capacity, Characteristic Dimension & Fourier Number. We can use 3 other way(s) to calculate the same, which is/are as follows -

Biot Number = (Heat Transfer Coefficient*Thickness of Wall)/Thermal Conductivity
Biot Number = (-1/Fourier Number)*ln((Temperature at Any Time T-Temperature of Bulk Fluid)/(Initial Temperature of Object-Temperature of Bulk Fluid))
Biot Number = (Heat Transfer Coefficient*Surface Area for Convection*Time Constant)/(Density of Body*Specific Heat Capacity*Volume of Object*Fourier Number)

Home

FREE PDFs

🔍 Search