Bending Stress using Eccentric Load and Eccentricity Calculator

✖Eccentric Load on Column is the load that causes direct stress as well as bending stress.ⓘ Eccentric Load on Column [P]			+10% -10%
✖Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.ⓘ Eccentricity of Loading [e_load]			+10% -10%
✖Depth of Column is the distance from the top or surface to the bottom of something.ⓘ Depth of Column [h]			+10% -10%
✖Width of Column is describe that how wide the column is.ⓘ Width of Column [b]			+10% -10%

✖Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.ⓘ Bending Stress using Eccentric Load and Eccentricity [σ_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Bending Stress using Eccentric Load and Eccentricity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bending Stress in Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Depth of Column*(Width of Column^2))
σ_b = (6*P*e_load)/(h*(b^2))
This formula uses 5 Variables

Variables Used

Bending Stress in Column - (Measured in Pascal) - Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.
Eccentric Load on Column - (Measured in Newton) - Eccentric Load on Column is the load that causes direct stress as well as bending stress.
Eccentricity of Loading - (Measured in Meter) - Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.
Depth of Column - (Measured in Meter) - Depth of Column is the distance from the top or surface to the bottom of something.
Width of Column - (Measured in Meter) - Width of Column is describe that how wide the column is.

STEP 1: Convert Input(s) to Base Unit

Eccentric Load on Column: 7 Kilonewton --> 7000 Newton (Check conversion here)
Eccentricity of Loading: 25 Millimeter --> 0.025 Meter (Check conversion here)
Depth of Column: 3000 Millimeter --> 3 Meter (Check conversion here)
Width of Column: 600 Millimeter --> 0.6 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_b = (6*P*e_load)/(h*(b^2)) --> (6*7000*0.025)/(3*(0.6^2))

Evaluating ... ...

σ_b = 972.222222222222

STEP 3: Convert Result to Output's Unit

972.222222222222 Pascal -->0.000972222222222222 Megapascal (Check conversion here)

FINAL ANSWER

0.000972222222222222 ≈ 0.000972 Megapascal <-- Bending Stress in Column

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Direct And Bending Stress » Resultant Stress » Mechanical » Rectangular Section Is Subjected to Eccentric Load » Bending Stress using Eccentric Load and Eccentricity

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Rectangular Section Is Subjected to Eccentric Load Calculators

Minimum Stress using Eccentric Load and Eccentricity

LaTeX Go Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area)

Eccentric Load using Minimum Stress

LaTeX Go Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column))

Eccentricity using Minimum Stress

LaTeX Go Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6)

Minimum Stress

LaTeX Go Minimum Stress Value = (Direct Stress-Bending Stress in Column)

Bending Stress using Eccentric Load and Eccentricity Formula

LaTeX Go

Bending Stress in Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Depth of Column*(Width of Column^2))
σ_b = (6*P*e_load)/(h*(b^2))

What type of Stress is Developed due to Bending?

In torsion of a circular shaft, the action was all shear; contiguous cross sections sheared over one another in their rotation about the axis of the shaft. Here, the major stresses induced due to bending are normal stresses of tension and compression.

How to Calculate Bending Stress using Eccentric Load and Eccentricity?

Bending Stress using Eccentric Load and Eccentricity calculator uses Bending Stress in Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Depth of Column*(Width of Column^2)) to calculate the Bending Stress in Column, The Bending Stress using Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress that occurs in a beam or column when an eccentric load is applied, taking into account the load's eccentricity and the beam's dimensions, to determine the structural integrity of the member under such loading conditions. Bending Stress in Column is denoted by σ_b symbol.

How to calculate Bending Stress using Eccentric Load and Eccentricity using this online calculator? To use this online calculator for Bending Stress using Eccentric Load and Eccentricity, enter Eccentric Load on Column (P), Eccentricity of Loading (e_load), Depth of Column (h) & Width of Column (b) and hit the calculate button. Here is how the Bending Stress using Eccentric Load and Eccentricity calculation can be explained with given input values -> 9.7E-10 = (6*7000*0.025)/(3*(0.6^2)).

FAQ

What is Bending Stress using Eccentric Load and Eccentricity?

The Bending Stress using Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress that occurs in a beam or column when an eccentric load is applied, taking into account the load's eccentricity and the beam's dimensions, to determine the structural integrity of the member under such loading conditions and is represented as σ_b = (6*P*e_load)/(h*(b^2)) or Bending Stress in Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Depth of Column*(Width of Column^2)). Eccentric Load on Column is the load that causes direct stress as well as bending stress, Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen, Depth of Column is the distance from the top or surface to the bottom of something & Width of Column is describe that how wide the column is.

How to calculate Bending Stress using Eccentric Load and Eccentricity?

The Bending Stress using Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress that occurs in a beam or column when an eccentric load is applied, taking into account the load's eccentricity and the beam's dimensions, to determine the structural integrity of the member under such loading conditions is calculated using Bending Stress in Column = (6*Eccentric Load on Column*Eccentricity of Loading)/(Depth of Column*(Width of Column^2)). To calculate Bending Stress using Eccentric Load and Eccentricity, you need Eccentric Load on Column (P), Eccentricity of Loading (e_load), Depth of Column (h) & Width of Column (b). With our tool, you need to enter the respective value for Eccentric Load on Column, Eccentricity of Loading, Depth of Column & Width of Column and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bending Stress in Column?

In this formula, Bending Stress in Column uses Eccentric Load on Column, Eccentricity of Loading, Depth of Column & Width of Column. We can use 1 other way(s) to calculate the same, which is/are as follows -

Bending Stress in Column = (6*Moment due to Eccentric Load)/(Depth of Column*Width of Column^2)

Home

FREE PDFs

🔍 Search