Bending Stress in extra full length leaves Calculator

✖Force Applied at End of Leaf Spring is the force exerted at the end of a leaf spring with extra full length leaves, affecting its overall performance.ⓘ Force Applied at End of Leaf Spring [P]			+10% -10%
✖Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system.ⓘ Length of Cantilever of Leaf Spring [L]			+10% -10%
✖Number of Full Length Leaves is the count of leaves that have reached their maximum possible length.ⓘ Number of Full length Leaves [n_f]			+10% -10%
✖Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf.ⓘ Number of Graduated Length Leaves [n_g]			+10% -10%
✖Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.ⓘ Width of Leaf [b]			+10% -10%
✖Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.ⓘ Thickness of Leaf [t]			+10% -10%

✖Bending Stress in full leaf is the stress experienced by a full leaf when it is subjected to external forces or loads.ⓘ Bending Stress in extra full length leaves [σ_bf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF PDF Image

Bending Stress in extra full length leaves Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bending Stress in Full Leaf = 18*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring/((3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2)
σ_bf = 18*P*L/((3*n_f+2*n_g)*b*t^2)
This formula uses 7 Variables

Variables Used

Bending Stress in Full Leaf - (Measured in Pascal) - Bending Stress in full leaf is the stress experienced by a full leaf when it is subjected to external forces or loads.
Force Applied at End of Leaf Spring - (Measured in Newton) - Force Applied at End of Leaf Spring is the force exerted at the end of a leaf spring with extra full length leaves, affecting its overall performance.
Length of Cantilever of Leaf Spring - (Measured in Meter) - Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system.
Number of Full length Leaves - Number of Full Length Leaves is the count of leaves that have reached their maximum possible length.
Number of Graduated Length Leaves - Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf.
Width of Leaf - (Measured in Meter) - Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.
Thickness of Leaf - (Measured in Meter) - Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.

STEP 1: Convert Input(s) to Base Unit

Force Applied at End of Leaf Spring: 37500 Newton --> 37500 Newton No Conversion Required
Length of Cantilever of Leaf Spring: 500 Millimeter --> 0.5 Meter (Check conversion here)
Number of Full length Leaves: 3 --> No Conversion Required
Number of Graduated Length Leaves: 15 --> No Conversion Required
Width of Leaf: 108 Millimeter --> 0.108 Meter (Check conversion here)
Thickness of Leaf: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_bf = 18*P*L/((3*n_f+2*n_g)*b*t^2) --> 18*37500*0.5/((3*3+2*15)*0.108*0.012^2)

Evaluating ... ...

σ_bf = 556445868.945869

STEP 3: Convert Result to Output's Unit

556445868.945869 Pascal -->556.445868945869 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

556.445868945869 ≈ 556.4459 Newton per Square Millimeter <-- Bending Stress in Full Leaf

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Springs » Multi Leaf Spring » Mechanical » Extra Full Length Leaves » Bending Stress in extra full length leaves

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Extra Full Length Leaves Calculators

Modulus of Elasticity of leaf given Deflection at Load Point Graduated Length Leaves

LaTeX Go Modulus of Elasticity of Spring = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring^3/(Deflection of Graduated Leaf at Load Point*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^3)

Deflection at Load Point Graduated Length Leaves

LaTeX Go Deflection of Graduated Leaf at Load Point = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring^3/(Modulus of Elasticity of Spring*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^3)

Bending Stress in Plate Graduated Length Leaves

LaTeX Go Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2)

Bending Stress in Plate Extra Full Length

LaTeX Go Bending Stress in Full Leaf = 6*Force Taken by Full Length Leaves*Length of Cantilever of Leaf Spring/(Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2)

Bending Stress in extra full length leaves Formula

LaTeX Go

Define Bending Stress?

Bending stress is the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued. Bending stress occurs when operating industrial equipment and in concrete and metallic structures when they are subjected to a tensile load.

How to Calculate Bending Stress in extra full length leaves?

Bending Stress in extra full length leaves calculator uses Bending Stress in Full Leaf = 18*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring/((3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2) to calculate the Bending Stress in Full Leaf, Bending Stress in extra full length leaves formula is defined as a measure of the stress that occurs in the leaves of a mechanical component, specifically in extra full length leaves, which is critical in determining the component's structural integrity and potential for failure under various loads. Bending Stress in Full Leaf is denoted by σ_bf symbol.

How to calculate Bending Stress in extra full length leaves using this online calculator? To use this online calculator for Bending Stress in extra full length leaves, enter Force Applied at End of Leaf Spring (P), Length of Cantilever of Leaf Spring (L), Number of Full length Leaves (n_f), Number of Graduated Length Leaves (n_g), Width of Leaf (b) & Thickness of Leaf (t) and hit the calculate button. Here is how the Bending Stress in extra full length leaves calculation can be explained with given input values -> 0.000835 = 18*37500*0.5/((3*3+2*15)*0.108*0.012^2).

FAQ

What is Bending Stress in extra full length leaves?

Bending Stress in extra full length leaves formula is defined as a measure of the stress that occurs in the leaves of a mechanical component, specifically in extra full length leaves, which is critical in determining the component's structural integrity and potential for failure under various loads and is represented as σ_bf = 18*P*L/((3*n_f+2*n_g)*b*t^2) or Bending Stress in Full Leaf = 18*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring/((3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2). Force Applied at End of Leaf Spring is the force exerted at the end of a leaf spring with extra full length leaves, affecting its overall performance, Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system, Number of Full Length Leaves is the count of leaves that have reached their maximum possible length, Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf, Width of Leaf is defined as the width of each leaf present in a multi-leaf spring & Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.

How to calculate Bending Stress in extra full length leaves?

Bending Stress in extra full length leaves formula is defined as a measure of the stress that occurs in the leaves of a mechanical component, specifically in extra full length leaves, which is critical in determining the component's structural integrity and potential for failure under various loads is calculated using Bending Stress in Full Leaf = 18*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring/((3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2). To calculate Bending Stress in extra full length leaves, you need Force Applied at End of Leaf Spring (P), Length of Cantilever of Leaf Spring (L), Number of Full length Leaves (n_f), Number of Graduated Length Leaves (n_g), Width of Leaf (b) & Thickness of Leaf (t). With our tool, you need to enter the respective value for Force Applied at End of Leaf Spring, Length of Cantilever of Leaf Spring, Number of Full length Leaves, Number of Graduated Length Leaves, Width of Leaf & Thickness of Leaf and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bending Stress in Full Leaf?

In this formula, Bending Stress in Full Leaf uses Force Applied at End of Leaf Spring, Length of Cantilever of Leaf Spring, Number of Full length Leaves, Number of Graduated Length Leaves, Width of Leaf & Thickness of Leaf. We can use 2 other way(s) to calculate the same, which is/are as follows -

Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2)
Bending Stress in Full Leaf = 6*Force Taken by Full Length Leaves*Length of Cantilever of Leaf Spring/(Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2)

Home

FREE PDFs

🔍 Search