Bending Stress in Plate Graduated Length Leaves Calculator

✖Force Taken by Graduated Length Leaves is the force exerted by graduated length leaves on an object, measured in a specific unit of measurement.ⓘ Force Taken by Graduated Length Leaves [P_g]			+10% -10%
✖Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system.ⓘ Length of Cantilever of Leaf Spring [L]			+10% -10%
✖Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf.ⓘ Number of Graduated Length Leaves [n_g]			+10% -10%
✖Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.ⓘ Width of Leaf [b]			+10% -10%
✖Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.ⓘ Thickness of Leaf [t]			+10% -10%

✖Bending Stress in full leaf is the stress experienced by a full leaf when it is subjected to external forces or loads.ⓘ Bending Stress in Plate Graduated Length Leaves [σ_bf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF PDF Image

Bending Stress in Plate Graduated Length Leaves Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2)
σ_bf = 6*P_g*L/(n_g*b*t^2)
This formula uses 6 Variables

Variables Used

Bending Stress in Full Leaf - (Measured in Pascal) - Bending Stress in full leaf is the stress experienced by a full leaf when it is subjected to external forces or loads.
Force Taken by Graduated Length Leaves - (Measured in Newton) - Force Taken by Graduated Length Leaves is the force exerted by graduated length leaves on an object, measured in a specific unit of measurement.
Length of Cantilever of Leaf Spring - (Measured in Meter) - Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system.
Number of Graduated Length Leaves - Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf.
Width of Leaf - (Measured in Meter) - Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.
Thickness of Leaf - (Measured in Meter) - Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.

STEP 1: Convert Input(s) to Base Unit

Force Taken by Graduated Length Leaves: 43269.23 Newton --> 43269.23 Newton No Conversion Required
Length of Cantilever of Leaf Spring: 500 Millimeter --> 0.5 Meter (Check conversion here)
Number of Graduated Length Leaves: 15 --> No Conversion Required
Width of Leaf: 108 Millimeter --> 0.108 Meter (Check conversion here)
Thickness of Leaf: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_bf = 6*P_g*L/(n_g*b*t^2) --> 6*43269.23*0.5/(15*0.108*0.012^2)

Evaluating ... ...

σ_bf = 556445859.053498

STEP 3: Convert Result to Output's Unit

556445859.053498 Pascal -->556.445859053498 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

556.445859053498 ≈ 556.4459 Newton per Square Millimeter <-- Bending Stress in Full Leaf

(Calculation completed in 00.007 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Springs » Multi Leaf Spring » Mechanical » Extra Full Length Leaves » Bending Stress in Plate Graduated Length Leaves

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Extra Full Length Leaves Calculators

Modulus of Elasticity of leaf given Deflection at Load Point Graduated Length Leaves

LaTeX Go Modulus of Elasticity of Spring = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring^3/(Deflection of Graduated Leaf at Load Point*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^3)

Deflection at Load Point Graduated Length Leaves

LaTeX Go Deflection of Graduated Leaf at Load Point = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring^3/(Modulus of Elasticity of Spring*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^3)

Bending Stress in Plate Graduated Length Leaves

LaTeX Go Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2)

Bending Stress in Plate Extra Full Length

LaTeX Go Bending Stress in Full Leaf = 6*Force Taken by Full Length Leaves*Length of Cantilever of Leaf Spring/(Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2)

Bending Stress in Plate Graduated Length Leaves Formula

LaTeX Go

Define Bending Stress?

Bending stress is the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued. Bending stress occurs when operating industrial equipment and in concrete and metallic structures when they are subjected to a tensile load.

How to Calculate Bending Stress in Plate Graduated Length Leaves?

Bending Stress in Plate Graduated Length Leaves calculator uses Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2) to calculate the Bending Stress in Full Leaf, Bending Stress in Plate Graduated Length Leaves formula is defined as the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued. Bending Stress in Full Leaf is denoted by σ_bf symbol.

How to calculate Bending Stress in Plate Graduated Length Leaves using this online calculator? To use this online calculator for Bending Stress in Plate Graduated Length Leaves, enter Force Taken by Graduated Length Leaves (P_g), Length of Cantilever of Leaf Spring (L), Number of Graduated Length Leaves (n_g), Width of Leaf (b) & Thickness of Leaf (t) and hit the calculate button. Here is how the Bending Stress in Plate Graduated Length Leaves calculation can be explained with given input values -> 0.000556 = 6*43269.23*0.5/(15*0.108*0.012^2).

FAQ

What is Bending Stress in Plate Graduated Length Leaves?

Bending Stress in Plate Graduated Length Leaves formula is defined as the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued and is represented as σ_bf = 6*P_g*L/(n_g*b*t^2) or Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2). Force Taken by Graduated Length Leaves is the force exerted by graduated length leaves on an object, measured in a specific unit of measurement, Length of Cantilever of Leaf Spring is the distance from the fixed point to the end of the cantilever in an extra full-length leaf spring system, Number of Graduated Length Leaves is defined as the number of graduated-length leaves including master leaf, Width of Leaf is defined as the width of each leaf present in a multi-leaf spring & Thickness of Leaf is the measure of the distance from the top surface to the bottom surface of a leaf in extra full length leaves.

How to calculate Bending Stress in Plate Graduated Length Leaves?

Bending Stress in Plate Graduated Length Leaves formula is defined as the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued is calculated using Bending Stress in Full Leaf = 6*Force Taken by Graduated Length Leaves*Length of Cantilever of Leaf Spring/(Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2). To calculate Bending Stress in Plate Graduated Length Leaves, you need Force Taken by Graduated Length Leaves (P_g), Length of Cantilever of Leaf Spring (L), Number of Graduated Length Leaves (n_g), Width of Leaf (b) & Thickness of Leaf (t). With our tool, you need to enter the respective value for Force Taken by Graduated Length Leaves, Length of Cantilever of Leaf Spring, Number of Graduated Length Leaves, Width of Leaf & Thickness of Leaf and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bending Stress in Full Leaf?

In this formula, Bending Stress in Full Leaf uses Force Taken by Graduated Length Leaves, Length of Cantilever of Leaf Spring, Number of Graduated Length Leaves, Width of Leaf & Thickness of Leaf. We can use 2 other way(s) to calculate the same, which is/are as follows -

Bending Stress in Full Leaf = 6*Force Taken by Full Length Leaves*Length of Cantilever of Leaf Spring/(Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2)
Bending Stress in Full Leaf = 18*Force Applied at End of Leaf Spring*Length of Cantilever of Leaf Spring/((3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2)

Home

FREE PDFs

🔍 Search