Bending Moment at Section for Strut with Axial and Transverse Point Load at Center Calculator

✖Column Compressive Load is the load applied to a column that is compressive in nature.ⓘ Column Compressive Load [P_compressive]			+10% -10%
✖Deflection at Column Section is the lateral displacement at the section of the column.ⓘ Deflection at Column Section [δ]			+10% -10%
✖Greatest Safe Load is the maximum safe point load allowable at the center of the beam.ⓘ Greatest Safe Load [W_p]			+10% -10%
✖Distance of Deflection from end A is the distance x of deflection from end A.ⓘ Distance of Deflection from end A [x]			+10% -10%

✖Bending Moment in Column is the reaction induced in a column when an external force or moment is applied to the element, causing the element to bend.ⓘ Bending Moment at Section for Strut with Axial and Transverse Point Load at Center [M_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Bending Moment at Section for Strut with Axial and Transverse Point Load at Center Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2)
M_b = -(P_compressive*δ)-(W_p*x/2)
This formula uses 5 Variables

Variables Used

Bending Moment in Column - (Measured in Newton Meter) - Bending Moment in Column is the reaction induced in a column when an external force or moment is applied to the element, causing the element to bend.
Column Compressive Load - (Measured in Newton) - Column Compressive Load is the load applied to a column that is compressive in nature.
Deflection at Column Section - (Measured in Meter) - Deflection at Column Section is the lateral displacement at the section of the column.
Greatest Safe Load - (Measured in Newton) - Greatest Safe Load is the maximum safe point load allowable at the center of the beam.
Distance of Deflection from end A - (Measured in Meter) - Distance of Deflection from end A is the distance x of deflection from end A.

STEP 1: Convert Input(s) to Base Unit

Column Compressive Load: 0.4 Kilonewton --> 400 Newton (Check conversion here)
Deflection at Column Section: 12 Millimeter --> 0.012 Meter (Check conversion here)
Greatest Safe Load: 0.1 Kilonewton --> 100 Newton (Check conversion here)
Distance of Deflection from end A: 35 Millimeter --> 0.035 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_b = -(P_compressive*δ)-(W_p*x/2) --> -(400*0.012)-(100*0.035/2)

Evaluating ... ...

M_b = -6.55

STEP 3: Convert Result to Output's Unit

-6.55 Newton Meter --> No Conversion Required

FINAL ANSWER

-6.55 Newton Meter <-- Bending Moment in Column

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Strut With Lateral Load » Mechanical » Strut Subjected to Compressive Axial Thrust and a Transverse Point Load at the Centre » Bending Moment at Section for Strut with Axial and Transverse Point Load at Center

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Strut Subjected to Compressive Axial Thrust and a Transverse Point Load at the Centre Calculators

Deflection at Section for Strut with Axial and Transverse Point Load at Center

LaTeX Go Deflection at Column Section = Column Compressive Load-(Bending Moment in Column+(Greatest Safe Load*Distance of Deflection from end A/2))/(Column Compressive Load)

Compressive Axial Load for Strut with Axial and Transverse Point Load at Center

LaTeX Go Column Compressive Load = -(Bending Moment in Column+(Greatest Safe Load*Distance of Deflection from end A/2))/(Deflection at Column Section)

Transverse Point Load for Strut with Axial and Transverse Point Load at Center

LaTeX Go Greatest Safe Load = (-Bending Moment in Column-(Column Compressive Load*Deflection at Column Section))*2/(Distance of Deflection from end A)

Bending Moment at Section for Strut with Axial and Transverse Point Load at Center

LaTeX Go Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2)

Bending Moment at Section for Strut with Axial and Transverse Point Load at Center Formula

LaTeX Go

Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2)
M_b = -(P_compressive*δ)-(W_p*x/2)

What is Transverse Point Loading?

Transverse loading is a load applied vertically to the plane of the longitudinal axis of a configuration, such as a wind load. It causes the material to bend and rebound from its original position, with inner tensile and compressive straining associated with the change in curvature of the material.

How to Calculate Bending Moment at Section for Strut with Axial and Transverse Point Load at Center?

Bending Moment at Section for Strut with Axial and Transverse Point Load at Center calculator uses Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2) to calculate the Bending Moment in Column, The Bending Moment at Section for Strut with Axial and Transverse Point Load at Center formula is defined as the measure of the turning effect of a force around a pivot point, specifically for a strut subjected to compressive axial thrust and a transverse point load at the center, which is crucial in structural analysis and design. Bending Moment in Column is denoted by M_b symbol.

How to calculate Bending Moment at Section for Strut with Axial and Transverse Point Load at Center using this online calculator? To use this online calculator for Bending Moment at Section for Strut with Axial and Transverse Point Load at Center, enter Column Compressive Load (P_compressive), Deflection at Column Section (δ), Greatest Safe Load (W_p) & Distance of Deflection from end A (x) and hit the calculate button. Here is how the Bending Moment at Section for Strut with Axial and Transverse Point Load at Center calculation can be explained with given input values -> -6.55 = -(400*0.012)-(100*0.035/2).

FAQ

What is Bending Moment at Section for Strut with Axial and Transverse Point Load at Center?

The Bending Moment at Section for Strut with Axial and Transverse Point Load at Center formula is defined as the measure of the turning effect of a force around a pivot point, specifically for a strut subjected to compressive axial thrust and a transverse point load at the center, which is crucial in structural analysis and design and is represented as M_b = -(P_compressive*δ)-(W_p*x/2) or Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2). Column Compressive Load is the load applied to a column that is compressive in nature, Deflection at Column Section is the lateral displacement at the section of the column, Greatest Safe Load is the maximum safe point load allowable at the center of the beam & Distance of Deflection from end A is the distance x of deflection from end A.

How to calculate Bending Moment at Section for Strut with Axial and Transverse Point Load at Center?

The Bending Moment at Section for Strut with Axial and Transverse Point Load at Center formula is defined as the measure of the turning effect of a force around a pivot point, specifically for a strut subjected to compressive axial thrust and a transverse point load at the center, which is crucial in structural analysis and design is calculated using Bending Moment in Column = -(Column Compressive Load*Deflection at Column Section)-(Greatest Safe Load*Distance of Deflection from end A/2). To calculate Bending Moment at Section for Strut with Axial and Transverse Point Load at Center, you need Column Compressive Load (P_compressive), Deflection at Column Section (δ), Greatest Safe Load (W_p) & Distance of Deflection from end A (x). With our tool, you need to enter the respective value for Column Compressive Load, Deflection at Column Section, Greatest Safe Load & Distance of Deflection from end A and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Bending Moment in Column?

In this formula, Bending Moment in Column uses Column Compressive Load, Deflection at Column Section, Greatest Safe Load & Distance of Deflection from end A. We can use 1 other way(s) to calculate the same, which is/are as follows -

Bending Moment in Column = Bending Stress in Column*(Column Cross Sectional Area*(Least Radius of Gyration of Column^2))/(Distance from Neutral Axis to Extreme Point)

Home

FREE PDFs

🔍 Search