Bearing Capacity of Non Cohesive Soil for Square Footing Calculator

✖Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge in KiloPascal [σ_s]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%

✖Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Bearing Capacity of Non Cohesive Soil for Square Footing [q_fc]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bearing Capacity of Non cohesive Soil Formulas PDF PDF Image

Bearing Capacity of Non Cohesive Soil for Square Footing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)
q_fc = (σ_s*N_q)+(0.4*γ*B*N_γ)
This formula uses 6 Variables

Variables Used

Ultimate Bearing Capacity in Soil - (Measured in Pascal) - Ultimate Bearing Capacity in Soil is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Effective Surcharge in KiloPascal - (Measured in Pascal) - Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

STEP 1: Convert Input(s) to Base Unit

Effective Surcharge in KiloPascal: 45.9 Kilonewton per Square Meter --> 45900 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_fc = (σ_s*N_q)+(0.4*γ*B*N_γ) --> (45900*2.01)+(0.4*18000*2*1.6)

Evaluating ... ...

q_fc = 115299

STEP 3: Convert Result to Output's Unit

115299 Pascal -->115.299 Kilopascal (Check conversion here)

FINAL ANSWER

115.299 Kilopascal <-- Ultimate Bearing Capacity in Soil

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Bearing Capacity of Non cohesive Soil » Bearing Capacity of Non Cohesive Soil for Square Footing

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Bearing Capacity of Non cohesive Soil Calculators

Bearing Capacity Factor Dependent on Unit Weight for Strip Footing

LaTeX Go Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity in Soil-(Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge))/(0.5*Unit Weight of Soil*Width of Footing)

Effective Surcharge given Bearing Capacity of Non Cohesive Soil for Strip Footing

LaTeX Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity in Soil-(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))/Bearing Capacity Factor dependent on Surcharge

Bearing Capacity Factor Dependent on Surcharge for Strip Footing

LaTeX Go Bearing Capacity Factor dependent on Surcharge = (Ultimate Bearing Capacity in Soil-(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))/Effective Surcharge in KiloPascal

Bearing Capacity of Non Cohesive Soil for Strip Footing

LaTeX Go Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)

Bearing Capacity of Non Cohesive Soil for Square Footing Formula

LaTeX Go

What is Non Cohesive Soil?

Cohesionless soil is any free-running type of soil, such as sand or gravel, whose strength depends on friction between particles. Non-cohesive soils consist of large or irregular-sized soil particles with little to no clay content.

How to Calculate Bearing Capacity of Non Cohesive Soil for Square Footing?

Bearing Capacity of Non Cohesive Soil for Square Footing calculator uses Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight) to calculate the Ultimate Bearing Capacity in Soil, The Bearing Capacity of Non Cohesive Soil for Square Footing is defined as the value of bearing capacity of non cohesive soil when we have prior information of other parameters used. Ultimate Bearing Capacity in Soil is denoted by q_fc symbol.

How to calculate Bearing Capacity of Non Cohesive Soil for Square Footing using this online calculator? To use this online calculator for Bearing Capacity of Non Cohesive Soil for Square Footing, enter Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ) and hit the calculate button. Here is how the Bearing Capacity of Non Cohesive Soil for Square Footing calculation can be explained with given input values -> 0.11484 = (45900*2.01)+(0.4*18000*2*1.6).

FAQ

What is Bearing Capacity of Non Cohesive Soil for Square Footing?

The Bearing Capacity of Non Cohesive Soil for Square Footing is defined as the value of bearing capacity of non cohesive soil when we have prior information of other parameters used and is represented as q_fc = (σ_s*N_q)+(0.4*γ*B*N_γ) or Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight). Effective Surcharge in KiloPascal also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing & Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

How to calculate Bearing Capacity of Non Cohesive Soil for Square Footing?

The Bearing Capacity of Non Cohesive Soil for Square Footing is defined as the value of bearing capacity of non cohesive soil when we have prior information of other parameters used is calculated using Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.4*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight). To calculate Bearing Capacity of Non Cohesive Soil for Square Footing, you need Effective Surcharge in KiloPascal (σ_s), Bearing Capacity Factor dependent on Surcharge (N_q), Unit Weight of Soil (γ), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (N_γ). With our tool, you need to enter the respective value for Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing & Bearing Capacity Factor dependent on Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Ultimate Bearing Capacity in Soil?

In this formula, Ultimate Bearing Capacity in Soil uses Effective Surcharge in KiloPascal, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing & Bearing Capacity Factor dependent on Unit Weight. We can use 2 other way(s) to calculate the same, which is/are as follows -

Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)
Ultimate Bearing Capacity in Soil = (Effective Surcharge in KiloPascal*Bearing Capacity Factor dependent on Surcharge)+(0.3*Unit Weight of Soil*Diameter of Section*Bearing Capacity Factor dependent on Unit Weight)

Home

FREE PDFs

🔍 Search